Understanding Li creep in Li-metal pouch cells and the role of separator integrity
Source abstract
Abstract
To realize the advantages of high energy density lithium-metal batteries, their cycle life and safety need to be improved to meet practical and commercial demands. External compression has been shown to improve the performance of lithium-metal batteries through suppressing dendrite growth, densifying the lithium deposit, and improving the lithium deposition morphology. Here, we report the behavior of high-capacity Li||LFP pouch cells in pyrrolidinium-based ionic liquid electrolytes at elevated temperature (50 °C) under various levels of compression and discuss the compression-related mechanisms that affect the performance and failure of the cells. Using scanning electron microscopy, we observed more uniform and less dendritic Li deposition at high levels of compression. However, cell pressure evolution data shows significant lithium metal creep above 800 kPa, effectively limiting the maximum applicable compression. Reducing the testing temperature to 25 °C and maintaining high compression led to suppressed Li creep and extended the cell cycle life by 40%. The adverse effect of lithium creep on the separator is identified as an important mechanism on the pouch cell cycling behavior and is further discussed herein.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries
2. History, evolution, and future status of energy storage10.1109/JPROC.2012.2190170 ↗
3. Zhang · 2017 · vol. 249
4. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
5. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
6. Recent progress in understanding solid electrolyte interphase on lithium metal anodes10.1002/aenm.202003092 ↗
7. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles10.1038/s41560-019-0390-6 ↗
8. High lithium metal cycling efficiency in a room-temperature ionic liquid10.1149/1.1664051 ↗
9. Fast charge/discharge of Li metal batteries using an ionic liquid electrolyte10.1149/2.022310jes ↗
10. Role of Li concentration and the SEI layer in enabling high performance Li metal electrodes using a phosphonium bis(fluorosulfonyl)imide ionic liquid10.1021/acs.jpcc.7b01929 ↗
11. Application of super-concentrated phosphonium based ionic liquid electrolyte for anode-free lithium metal batteries10.1039/D1SE00724F ↗
12. A review on recent progress, challenges and perspective of battery thermal management system10.1016/j.ijheatmasstransfer.2020.120834 ↗
13. Toward practical Li metal batteries: importance of separator compatibility using ionic liquid electrolytes10.1021/acsaem.9b01175 ↗
14. Understanding the role of separator and electrolyte compatibility on lithium metal anode performance using ionic liquid-based electrolytes10.1021/acsaem.1c01114 ↗
15. In-situ study of electrode stack growth in rechargeable cells at constant pressure10.1016/0022-0728(93)80362-L ↗
16. Effect of additives on Li cycling efficiency10.1149/1.2055116 ↗
17. Lithium metal stripping/plating mechanisms studies: a metallurgical approach10.1016/j.elecom.2006.07.037 ↗
18. Impact of external pressure and electrolyte transport properties on lithium dendrite growth10.1149/2.0651811jes ↗
19. Exploring the impact of mechanical pressure on the performance of anode-free lithium metal cells10.1149/2.0091908jes ↗
20. Rethinking how external pressure can suppress dendrites in lithium metal batteries10.1149/2.0701914jes ↗
21. Influence of electrolyte on lithium cycling efficiency with pressurized electrode stack10.1149/1.2054778 ↗
22. Pressure-tailored lithium deposition and dissolution in lithium metal batteries10.1038/s41560-021-00917-3 ↗
23. Lithium metal deposition/dissolution under uniaxial pressure with high-rigidity layered polyethylene separator10.1039/D0RA02788J ↗
24. Lithium mechanics: roles of strain rate and temperature and implications for lithium metal batteries10.1149/2.0221902jes ↗
25. Compressive creep deformation of lithium foil at varied cell conditions10.1016/j.jpowsour.2020.229404 ↗
26. Elastic, plastic, and creep mechanical properties of lithium metal10.1007/s10853-018-2971-3 ↗
27. The effect of aspect ratio on the mechanical behavior of Li metal in solid-state cells10.1016/j.jpowsour.2021.230831 ↗
28. Physical properties of high Li-ion content N-propyl-N-methylpyrrolidinium bis (fluorosulfonyl) imide based ionic liquid electrolytes10.1039/C4CP05333H ↗
29. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries10.1038/s41560-021-00852-3 ↗
30. Lithium fluoride in electrolyte for stable and safe lithium‐metal batteries
31. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
32. The effect of external compressive loads on the cycle lifetime of lithium-ion pouch cells10.1016/j.est.2017.07.021 ↗
33. Development of standardized battery pack for next-generation PHEVs in considering the effect of external pressure on lithium-ion pouch cells10.4271/2018-01-0439 ↗
34. Optimized carbon-coated LiFePO4 cathode material for lithium-ion batteries10.1016/j.matchemphys.2008.11.063 ↗
35. Arsenault · 2016 · vol. 6
36. Schultz · 2002
37. Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes10.1073/pnas.1615733114 ↗
38. Phospho‐olivines as positive‐electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
39. Mechanical properties of a battery separator under compression and tension10.1149/2.0191411jes ↗
40. https://www.celgard.com/product-data.