Towards strategies to mitigate degradation and regenerate performance of a solid oxide electrolyzer during co-electrolysis operation
Source abstract
Abstract
One of the main objectives towards the broad commercialization of solid oxide electrolysis cells (SOEC) is to reduce the effects of degradation and extend the lifetime of the technology. Special industrially relevant operating conditions can, however, amplify and accelerate the degradation of SOECs, thus significantly reducing the lifetime of the technology. Nevertheless, not all degradation processes are completely irreversible, especially if they are detected at an early stage. In order to develop strategies to mitigate degradation and to regenerate performance, several experiments were performed on a five-layer SOEC stack operating in steam and co-electrolysis mode. The experiments were performed at different industrially relevant gas mixtures, reactant conversion rates and operating temperatures. The experimental results revealed different types and degrees of effects of the degradation, mitigation and regeneration strategies on the performance of the stack, which were analyzed in detail and linked to the underlying mechanisms and processes. As a result, promising strategies for mitigating degradation and regenerating the performance of SOECs could be derived and optimized. In addition, this study provides a set of recommendations for safe and stable operation of SOECs under various operating conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Renewable energy and climate change10.1016/j.rser.2022.112111 ↗
2. IPCC · 2021
3. Climate change, fossil-fuel pollution, and children’s health10.1056/NEJMra2117706 ↗
4. Global mortality from outdoor fine particle pollution generated by fossil fuel combustion: Results from GEOS-Chem10.1016/j.envres.2021.110754 ↗
5. Progress of renewable electricity replacing fossil fuels
6. Hydrogen in energy transition: A review10.1016/j.ijhydene.2020.11.256 ↗
7. Recent advances in high temperature electrolysis using solid oxide fuel cells: A review10.1016/j.jpowsour.2011.12.019 ↗
8. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
9. Carbon dioxide recycling by high temperature co-electrolysis and hydrocarbon synthesis
10. Singhal · 2003
11. Ammonia as promising fuel for solid oxide fuel cells: Experimental analysis and performance evaluation10.1149/09101.1601ecst ↗
12. Experimental investigation of electrochemical reactions along SOFCs for internal and external reformed methane10.1149/10301.2017ecst ↗
13. Performance assessment and evaluation of SOC stacks designed for application in a reversible operated 150 kW rSOC power plant
14. Performance investigation and optimization of a SOEC stack operated under industrially relevant conditions10.1149/10301.0519ecst ↗
15. Development of test protocols for solid oxide electrolysis cells operated under accelerated degradation conditions
16. Review—Materials degradation of solid oxide electrolysis cells10.1149/2.0101611jes ↗
17. Solid oxide electrolysis cells: Degradation at high current densities10.1149/1.3447752 ↗
18. Ni/YSZ electrode degradation studied by impedance spectroscopy - Effect of p(H2O)10.1016/j.ssi.2010.01.004 ↗
19. An operation strategy for mitigating the degradation of solid oxide electrolysis cells for syngas production
20. Re-activation of degraded nickel cermet anodes - Nano-particle formation via reverse current pulses10.1016/j.jpowsour.2017.11.088 ↗
21. Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies—A review10.1016/j.jmst.2019.07.026 ↗
22. Quantitative review of degradation and lifetime of solid oxide cells and stacks
23. Mitigation of the delamination of LSM anode in solid oxide electrolysis cells using manganese-modified YSZ10.1016/j.ijhydene.2013.03.036 ↗
24. Improved durability of SOEC stacks for high temperature electrolysis10.1016/j.ijhydene.2012.09.176 ↗
25. Surface segregation in solid oxide cell oxygen electrodes: Phenomena, mitigation strategies and electrochemical properties10.1007/s41918-020-00078-z ↗
26. Carbon deposition and sulfur poisoning during CO2 electrolysis in nickel-based solid oxide cell electrodes10.1016/j.jpowsour.2017.10.097 ↗
27. Comprehensive review of chromium deposition and poisoning of solid oxide fuel cells (SOFCs) cathode materials
28. Recent advances in material and performance aspects of solid oxide fuel cells
29. Mitigation of chromium poisoning of cathodes in solid oxide fuel cells employing CuMn1.8O4 spinel coating on metallic interconnect10.1016/j.jpowsour.2017.11.069 ↗
30. Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate10.1016/j.jpowsour.2015.06.133 ↗
31. Strategy for carbon gasification from porous Ni-YSZ anodes of industrial-sized ASC-SOFCs and effects of carbon growth10.1149/2.0521614jes ↗
32. Analysis of possibilities for carbon removal from porous anode of solid oxide fuel cells after different failure modes10.1016/j.jpowsour.2015.10.071 ↗
33. Towards practicable methods for carbon removal from Ni-YSZ anodes and restoring the performance of commercial-sized ASC-SOFCs after carbon deposition induced degradation10.1016/j.enconman.2018.10.022 ↗
34. Degradation studies of ceria-based solid oxide fuel cells at intermediate temperature under various load conditions10.1016/j.jpowsour.2020.227758 ↗
35. Degradation of anode-supported solid oxide fuel cells under load trip and cycle conditions and their degradation prevention operating logic10.1149/2.1391809jes ↗
36. Robust NdBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode material and its degradation prevention operating logic for intermediate temperature-solid oxide fuel cells10.1016/j.jpowsour.2016.09.080 ↗
37. Discharge performance recovery of a solid oxide fuel cell based on a prognostic-based control strategy
38. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
39. Reactivating the Ni-YSZ electrode in solid oxide cells and stacks by infiltration10.1016/j.jpowsour.2018.01.021 ↗
40. Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system10.1016/j.enconman.2019.112215 ↗
41. Condition monitoring of solid oxide fuel cells by fast electrochemical impedance spectroscopy: A case example of detecting deficiencies in fuel supply10.1016/j.jpowsour.2021.229491 ↗
42. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review10.1016/j.jpowsour.2020.228742 ↗
43. Study of proton exchange membrane fuel cells using electrochemical impedance spectroscopy technique – A review10.1016/j.jpowsour.2013.04.011 ↗
44. In operando electrochemical impedance spectroscopy monitoring of nickel catalysts for hydrogen production, Part I: Methodology and performance characterization10.1016/j.fuel.2022.124256 ↗
45. Boskoski · 2017
46. Application of measurement models to impedance spectroscopy III. Evaluation of consistency with the kramers-kronig relations10.1149/1.2048479 ↗
47. Z-hit : A simple relation between impedance modulus and phase angle. providing a new way to the validation of electrochemical impedance spectra
48. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: A Bayesian and hierarchical Bayesian approach10.1016/j.electacta.2015.03.123 ↗
49. Performance comparison of fick’s, dusty-gas and stefan-maxwell models to predict the concentration overpotential of a SOFC anode10.1016/S0378-7753(02)00724-3 ↗
50. 2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis10.1016/j.ijhydene.2012.01.072 ↗
51. High temperature solid oxide H2O/CO2 co-electrolysis for syngas production10.1016/j.fuproc.2016.08.009 ↗
52. Durability of solid oxide electrolysis stack under dynamic load cycling for syngas production
53. Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability10.1016/j.ssi.2010.06.014 ↗
54. Optimization of ESC performance for co-electrolysis operation10.1149/07801.3025ecst ↗
55. High temperature co-electrolysis of steam and CO2 in an SOC stack: Performance and durability10.1002/fuce.201200169 ↗
56. Long-term tests of a Jülich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes10.1016/j.ijhydene.2013.01.192 ↗
57. Electrolysis of carbon dioxide in Solid Oxide Electrolysis Cells10.1016/j.jpowsour.2009.02.093 ↗
58. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni/8YSZ cermet electrodes10.1149/1.2908860 ↗
59. Impedance study of alternative (La,Sr)FeO[sub 3–δ] and (La,Sr)(Co,Fe)O[sub 3–δ] MIEC cathode compositions10.1149/1.3265473 ↗
60. Performance and electrochemical analysis of solid oxide fuel cells based on LSCF-YSZ nano-electrode10.1111/ijac.12748 ↗
61. Performance and degradation of solid oxide electrolysis cells in stack10.1149/2.0941508jes ↗
62. Performance and degradation of an SOEC stack with different cell components10.1016/j.electacta.2017.11.180 ↗
63. Experimental investigation of segmented SOECs: Locally-resolved impedance and degradation characteristics
64. Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode10.1016/j.ijhydene.2010.11.100 ↗
65. Diffusion-limited electrochemical oxidation of H2/CO on Ni-anode catalyst in a CH4/CO2-solid oxide fuel cell10.1016/j.cattod.2015.12.026 ↗
66. Syngas production in high performing tubular solid oxide cells by using high-temperature H2O/CO2 co-electrolysis10.1016/j.cej.2017.10.110 ↗
67. Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability10.1016/j.ssi.2016.06.003 ↗
68. A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells10.1016/j.ijhydene.2013.09.045 ↗
69. Solid oxide electrolysis cells: Microstructure and degradation of the Ni/Yttria-stabilized zirconia electrode10.1149/1.2967331 ↗
70. Carbon deposition in solid oxide cells during co-electrolysis of H 2 O and CO 210.1149/2.079403jes ↗
71. Comprehensive investigation of methane conversion over Ni(111) surface under a consistent DFT framework: Implications for anti-coking of SOFC anodes10.1016/j.apsusc.2019.02.084 ↗
72. Carbon deposition behaviour in metal-infiltrated gadolinia doped ceria electrodes for simulated biogas upgrading in solid oxide electrolysis cells10.1016/j.jpowsour.2015.06.003 ↗
73. In-operando Raman spectroscopy study of passivation effects on Ni-CGO electrodes in CO 2 electrolysis conditions10.1149/05701.3111ecst ↗
74. A Raman spectroscopic study of the carbon deposition mechanism on Ni/CGO electrodes during CO/CO2 electrolysis10.1039/C4CP01503G ↗
75. Carbon nanotube growth on nanozirconia under strong cathodic polarization in steam and carbon dioxide10.1002/cctc.201300941 ↗
76. Experimental characterization and modeling of the electrochemical reduction of CO2 in solid oxide electrolysis cells10.1016/j.electacta.2012.10.107 ↗
77. Poisoning of solid oxide electrolysis cells by impurities10.1149/1.3464804 ↗
78. Holistic approach to design, test, and optimize stand-alone sofc-reformer systems10.3390/pr9020348 ↗
79. In situ Raman studies of carbon removal from high temperature Ni–YSZ cermet anodes by gas phase reforming agents10.1021/jp408192e ↗
80. CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni–YSZ cermet anodes10.1016/j.ijhydene.2016.11.162 ↗
81. Cell-protecting regeneration from anode carbon deposition using in situ produced oxygen and steam: A combined experimental and theoretical study10.1016/j.jmst.2018.04.011 ↗
82. How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells10.1016/j.electacta.2020.136764 ↗
83. Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements10.1016/j.jpowsour.2019.226838 ↗
84. Unwinding entangled degradation mechanisms in solid oxide electrolysis cells through electrode modifications and impedance analysis10.1002/fuce.201800166 ↗
85. Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels10.1016/j.jpowsour.2014.06.082 ↗