The enhanced electrical performance and grain boundary conduction mechanism of zirconia-bismuth oxide electrolytes for solid oxide fuel cells
Source abstract
Abstract
Er 0.2Bi 0.8O 1.5 (ESB), the oxide with the best oxygen conduction ability, is introduced to modify the electrical performance of Y 0.16Zr 0.84O 1.92 (YSZ) electrolytes for solid oxide fuel cells, and the electrical property and grain boundary conduction mechanism of xESB-YSZ (x = 0, 5, 10, 15, and 20 mol.%) are investigated. The introduction of ESB effectively promotes densification during sintering and improves the electrical performance of YSZ. At the addition of 20 mol.% ESB (20ESB-YSZ), the electrolyte allows a decrease of 500 °C for sintering temperature due to the low melting point of ESB, and ∼4 times higher electrical conductivity (0.093 S cm −1 at 750 °C) than that of YSZ (0.021 S cm −1 at 750 °C) without extra electronic conduction. Basing on the Motte-Schottky model, the enhance electrical performance is mainly attribute to two aspects. One is the lower space charge potential (0.014 V for 20ESB-YSZ, 0.207 V for YSZ), and the other is the higher impurity blocking term (0.97 for 20ESB-YSZ, 0.928 for YSZ). X-ray photoelectron spectroscopy analysis of composite electrolytes reveals that the oxygen vacancies content increase with the increased addition amount of ESB. The 20ESB-YSZ electrolyte-supported single cell with Ag-Sm 0.2Ce 0.8O 1.9 as electrodes exhibits a power density of 0.572 W cm −2 at 750 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A review on recent advances in micro-tubular solid oxide fuel cells10.1016/j.jpowsour.2021.230135 ↗
2. Simulation of hydrogen and coal gas fueled flat-tubular solid oxide fuel cell (FT-SOFC)10.1016/j.ijhydene.2021.07.231 ↗
3. Solid oxide fuel cell: decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
4. Electrolyte bi-layering strategy to improve the performance of an intermediate temperature solid oxide fuel cell: a review10.1016/j.jpowsour.2018.02.003 ↗
5. The evolution of low temperature solid oxide fuel cells10.1557/jmr.2012.194 ↗
6. Oxide ion conducting solid electrolytes based on Bi2O310.1016/0167-2738(96)00348-7 ↗
7. Structural instability and electrical properties in epitaxial Er2O3-stabilized Bi2O3 thin films10.1016/j.ssi.2014.08.004 ↗
8. Functionally graded bismuth oxide/zirconia bilayer electrolytes for high-performance intermediate-temperature solid oxide fuel cells (IT-SOFCs)10.1021/acsami.6b16660 ↗
9. A simulation study on electrochemical properties of Bi-layered electrolytes GDC(Gd0.1Ce0.9O1.95)/YSZ(Y0.16Zr0.84O1.92), ESB(Er0.4Bi1.6O3)/GDC and ESB/YSZ with different layer thickness fractions in solid oxide fuel cells10.1016/j.ijhydene.2019.06.024 ↗
10. A new type of Gd0.2Ce0.8O3-δ fuel cell electrolyte containing Er0.2Bi0.8O1.5 with highly improved performance10.1016/j.jallcom.2022.163654 ↗
11. Phase formation and properties of composite electrolyte BaCe0.8Y0.2O3−δ–Ce0.8Gd0.2O1.9 for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.01.033 ↗
12. High performance zirconia-bismuth oxide nanocomposite electrolytes for lower temperature solid oxide fuel cells10.1016/j.jpowsour.2016.04.090 ↗
13. A composite sol–gel process to prepare a YSZ electrolyte for Solid Oxide Fuel Cells10.1016/j.jpowsour.2012.01.109 ↗
14. Densification behavior of yttria-stabilized zirconia powders for solid oxide fuel cell electrolytes10.1007/s40145-018-0282-4 ↗
15. Highly flexible solid oxide fuel cells using phase-controlled electrolyte support10.1016/j.jeurceramsoc.2022.06.046 ↗
16. Oxygen diffusion across the grain boundary in bicrystal yttria stabilized zirconia10.1016/j.ssc.2012.09.019 ↗
17. The separation of grain and grain boundary impedance in thin yttria stabilized zirconia (YSZ) layers10.1016/j.ssi.2011.01.008 ↗
18. A stabilization mechanism of zirconia based on oxygen vacancies only10.1016/S1359-6454(02)00385-3 ↗
19. A Molecular Dynamics study of grain boundaries in YSZ: structure, energetics and diffusion of oxygen10.1016/j.ssi.2012.05.004 ↗
20. Electrical properties of the grain boundaries of oxygen ion conductors: acceptor-doped zirconia and ceria10.1016/j.pmatsci.2005.07.001 ↗
21. Grain boundary space charge effect in zirconia10.1149/1.1625948 ↗
22. Grain boundary space charge modulation in BaZr0.8Y0.2-xMxO3−δ with transition metal (M= Ni, Co, Fe, and Zn) co-doping10.1016/j.ijhydene.2020.07.207 ↗
23. The effect of segregated transition metal ions on the grain boundary resistivity of gadolinium doped ceria: alteration of the space charge potential10.1016/j.ssi.2006.08.017 ↗
24. Grain boundary blocking effect in zirconia: a Schottky barrier analysis10.1149/1.1348267 ↗
25. Structural and electrical characterisation of silica-containing yttria-stabilised zirconia10.1016/S0955-2219(98)00329-X ↗
26. Low-temperature constrained sintering of YSZ electrolyte with Bi2O3 sintering sacrificial layer for anode-supported solid oxide fuel cells10.1016/j.ceramint.2021.12.168 ↗
27. Grain boundary conduction behaviors of ultra-fine grained CeO2/BaCeO3 based electrolytes10.1016/j.ceramint.2022.05.204 ↗
28. Effect of Ba nonstoichiometry on the phase structure, sintering, electrical conductivity and phase stability of Ba1±xCe0.4Zr0.4Y0.2O3−δ (0≤x≤0.20) proton conductors10.1016/j.ijhydene.2011.04.037 ↗
29. The effect of NiO addition on the grain boundary behavior and electrochemical performance of Gd-doped ceria solid electrolyte under different sintering conditions10.1016/j.jeurceramsoc.2016.07.026 ↗
30. Sintering behavior of BaCe0.7Zr0.1Y0.2O3-δ electrolyte at 1150°C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance10.1016/j.ijhydene.2021.12.075 ↗
31. Fabrication, microstructure and properties of a YSZ electrolyte for SOFCs10.1016/j.jpowsour.2006.11.054 ↗
32. Study on rare earth electrolyte of SDC10.1016/S1002-0721(09)60213-1 ↗
33. Grain size dependent grain boundary defect structure: case of doped zirconia10.1016/S1359-6454(03)00052-1 ↗
34. Effect of nano-grain size on the ionic conductivity of spark plasma sintered 8YSZ electrolyte10.1016/j.ijhydene.2011.09.018 ↗
35. Enhanced electrical conductivity of ultrafine-grained 8Y2O3 stabilized ZrO2 produced by two-step sintering technique10.1016/j.jallcom.2010.01.046 ↗
36. Grain-size effects in YSZ thin-film electrolytes10.1111/j.1551-2916.2009.03157.x ↗
37. A critical examination of the Mott–Schottky model of grain-boundary space-charge layers in oxide-ion conductors10.1149/1945-7111/abfb37 ↗
38. Electrical properties of grain boundaries and size effects in samarium-doped ceria10.1016/j.jpowsour.2010.04.034 ↗
39. Effect of humidification on the grain boundary conductivity and space-charge effects in yttrium-doped barium cerate10.1016/j.ijhydene.2021.04.175 ↗
40. Synergetic effect of NiO and SiO2 on the sintering and properties of 8mol% yttria-stabilized zirconia electrolytes10.1016/j.electacta.2008.08.028 ↗
41. Solute segregation and grain-boundary impedance in high-purity stabilized zirconia10.1111/j.1151-2916.1996.tb08569.x ↗
42. Impedance studies of diffusion phenomena and ionic and electronic conductivity of cerium oxide10.1149/1.1861174 ↗
43. Atomic scale verification of oxide-ion vacancy distribution near a single grain boundary in YSZ10.1038/srep02680 ↗
44. Electronic conductivity measurement of yttria-stabilized zirconia solid electrolytes by a transient technique10.1016/j.jpowsour.2015.10.026 ↗
45. A brief review of heterostructure electrolytes for high-performance solid oxide fuel cells at reduced temperatures10.1007/s43207-021-00175-9 ↗
46. A novel composite cathode Er0.4Bi1.6O3–δPr0.5Ba0.5MnO3−δ for ceria-bismuth bilayer electrolyte high performance low temperature solid oxide fuel cells10.1016/j.jpowsour.2015.10.018 ↗
47. Measurement of ionic and electronic conductivities of yttria-stabilized zirconia by an embedded electrode method10.1149/2.0691503jes ↗
48. Electrochemical performance of a new structured low temperature SOFC with BZY electrolyte10.1016/j.ijhydene.2018.04.006 ↗
49. Controlled hydrothermal synthesis of zirconium oxide nanostructures and their optical properties10.1021/cg800711m ↗