Intergranular phase transformation in post-sinter annealed Nd–Dy–Fe–Cu–Ga–B magnet: From Ia3¯-cubic to I4/mcm-tetragonal structure
Source abstract
Abstract
High-coercivity Nd–Fe–B permanent magnets crucially depend on the deliberate modulation of intergranular phases, notably exemplified by the I4/ mcm-tetragonal Nd 6Fe 13Ga intergranular phase in the Nd–Fe–Ga–B magnet. Particularly, for the Nd–Dy–Fe–Cu–Ga–B magnet containing multiple rare earths (RE) and alloying metals (M), understanding the evolution of RE 6(Fe,M) 14 intergranular phase becomes more critical in the quest for higher coercivity. Here we design the (Nd,Pr) 29.0Dy 3.0Fe balCu 0.5Ga 0.5B 0.9N 1.15 (N Co, Al, Zr, wt.%) as-sintered magnets, where the major RE/Cu/Ga-rich Ia 3 ¯ -cubic intergranular phase is agglomerated in triple junctions. These pristine as-sintered magnets are subjected to annealing over a wide temperature range (390∼900 °C for 3 h) and quenching over a wide time range (0.5∼12 h at 460 °C). Through systematic microstructural characterization and first-principle calculation, the intergranular phase transformation from RE/Cu/Ga-rich Ia 3 ¯ -cubic to Fe/Ga-rich I4/ mcm-tetragonal structure, and accompanying elemental migration is unveiled. During post-sinter annealing, metastable state I firstly occurs, consisting of nanostructured RE/Cu-rich Ia 3 ¯ -cubic and I4/ mcm-tetragonal lamellas, with the emergence of multi-twins and coherent interface. Then it evolves into metastable state II, consisting of lath-shaped Fe/Cu/Ga-rich I4/ mcm-tetragonal structure with fluctuating Fe/Cu concentrations. Simultaneously, metastable state III occurs, exhibiting P6-hexagonal platelets with lower Cu content and reduced crystallographic symmetry. Finally, heightened Fe/Ga diffusion into the lattice of tetragonal phase with synchronous Cu discharge generates the thermodynamically more stable Fe/Ga-rich RE 6Fe 13Ga phase. The implication of phase transformation pathways on the coercivity is discussed, offering valuable insights into the optimization of RE 6(Fe,M) 14 intergranular phase and providing further opportunities for enhanced coercivity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. Global wind power development leads to high demand for neodymium praseodymium (NdPr): a scenario analysis based on market and technology development from 2019 to 204010.1016/j.jclepro.2020.123299 ↗
2. REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: a Critical Review10.1007/s40831-016-0090-4 ↗
3. Strategy and mechanism for substantially enhanced coercivity in multi-main-phase Nd-La-Ce-Fe-B sintered magnets10.1016/j.actamat.2023.119408 ↗
4. Perspective and Prospects for Rare Earth Permanent Magnets10.1016/j.eng.2018.11.034 ↗
5. On dysprosium utilisation in multi-main-phase Nd–Dy–Fe–B magnets with core–shell microstructures10.1016/j.actamat.2023.119344 ↗
6. Can a dysprosium shortage threaten green energy technologies?10.1016/j.energy.2012.10.043 ↗
7. Substantial coercivity enhancement in Dy-free Nd-Fe-B sintered magnet by Dy grain boundary diffusion10.1016/j.actamat.2023.118774 ↗
8. On the temperature-dependent coercivities of anisotropic Nd-Fe-B magnet10.1016/j.actamat.2020.08.040 ↗
9. Dependence of the crystal structure of the Nd-rich phase on oxygen content in an Nd–Fe–B sintered magnet10.1016/j.scriptamat.2008.03.004 ↗
10. Unveiling the origin of the large coercivity in (Nd, Dy)-Fe-B sintered magnets10.1038/s41427-023-00498-5 ↗
11. R2Fe14B materials: intrinsic properties and technological aspects10.1103/RevModPhys.63.819 ↗
12. Formation mechanism of Tb-rich shell in grain boundary diffusion processed Nd–Fe–B sintered magnets10.1016/j.scriptamat.2019.12.002 ↗
13. Tuning the distribution of Tb in Nd-Fe-B sintered magnet to overcome the magnetic properties trade-off10.1016/j.scriptamat.2022.114789 ↗
14. Challenges to achievement of metal sustainability in our high-tech society10.1039/C3CS60440C ↗
15. Recycle of critical metals and rare earth elements from waste electric and electronic equipment (circuits, solar, wind) and their reusability in additive manufacturing applications: a review10.3390/met12050794 ↗
16. Experimental and computational analysis of magnetization reversal in (Nd,Dy)-Fe-B core shell sintered magnets10.1016/j.actamat.2017.01.055 ↗
17. Large-scale micromagnetic simulation of Nd-Fe-B sintered magnets with Dy-rich shell structures10.1063/1.4943058 ↗
18. Simultaneous application of Dy–X (X= F or H) powder doping and dip-coating processes to Nd–Fe–B sintered magnets10.1016/j.actamat.2015.04.019 ↗
19. Enhancing the grain boundary diffusion efficiency of Tb for Nd-Fe-B magnets using dual-alloy diffusion source10.1016/j.jmrt.2022.03.016 ↗
20. Distribution of Dy in high-coercivity (Nd,Dy)–Fe–B sintered magnet10.1016/j.actamat.2011.01.046 ↗
21. Nd-Fe-B sintered magnets with low rare earth content fabricated via Dy71.5Fe28.5 grain boundary restructuring10.1016/j.jmmm.2019.166162 ↗
22. Dy6Fe13Cu grain boundary restructured Nd-Fe-B permanent magnets10.1016/j.jmmm.2023.171587 ↗
23. Anisotropic diffusion mechanism in grain boundary diffusion processed Nd–Fe–B sintered magnet10.1016/j.actamat.2016.04.019 ↗
24. Microstructure and coercivity of grain boundary diffusion processed Dy-free and Dy-containing Nd–Fe–B sintered magnets10.1016/j.actamat.2019.04.032 ↗
25. Macro-controlling of the element distribution to prepare high-performance sintered (Nd, Dy)-Fe-B composite magnets10.1016/j.intermet.2022.107679 ↗
26. Development of non-rare earth grain boundary modification techniques for Nd-Fe-B permanent magnets10.1016/j.jmst.2021.05.012 ↗
27. Effects of Pr-Cu-Ti intergranular addition on microstructure and magnetic properties of heavy-rare-earth-free Nd-Fe-B sintered magnets10.1016/j.jre.2021.02.007 ↗
28. Impact of different Nd-rich crystal-phases on the coercivity of Nd–Fe–B grain ensembles10.1016/j.scriptamat.2013.08.029 ↗
29. A study on the Nd-rich phase evolution in the Nd–Fe–B sintered magnet and its mechanism during post-sintering annealing10.1016/j.jallcom.2012.05.075 ↗
30. Cu-mediated grain boundary engineering in Nd–Ce–Fe–B nanostructured permanent magnets
31. Quantitative identification of constituent phases in a Nd-Fe-B-Cu sintered magnet and temperature dependent change of electron density of Nd2Fe14B studied by synchrotron X-ray diffraction10.1016/j.actamat.2019.10.004 ↗
32. A study of the effects of heat treatment on the microstructures and magnetic properties of Cu-added Nd-Fe-B type sintered magnets10.1016/0925-8388(94)91086-3 ↗
33. A study of the effects of the addition of various amounts of Cu to sintered Nd-Fe-B magnets10.1016/S0925-8388(96)02962-3 ↗
34. Dependence of magnetic, phase-transformation and microstructural characteristics on the Cu content of Nd–Fe–B sintered magnet10.1016/j.actamat.2013.11.063 ↗
35. Transmission electron microscopy study on Nd-rich phase and grain boundary structure of Nd–Fe–B sintered magnets10.1063/1.1851017 ↗
36. Origin of the coercivity difference in Nd-Fe-B sintered magnets processed from hydrogenation-disproportionation-desorption- recombination powder and jet-milled powder10.1016/j.actamat.2018.03.062 ↗
37. Formation of non-ferromagnetic grain boundary phase in a Ga-doped Nd-rich Nd–Fe–B sintered magnet10.1016/j.scriptamat.2015.10.042 ↗
38. Relationship between the microstructure, local magnetism and coercivity in Ga-containing Nd-Fe-B sintered magnets10.1016/j.actamat.2020.116517 ↗
39. Role of Ga on the high coercivity of Nd-rich Ga-doped Nd-Fe-B sintered magnet10.1016/j.jallcom.2019.03.114 ↗
40. Direct observation of ferromagnetism in grain boundary phase of Nd-Fe-B sintered magnet using soft x-ray magnetic circular dichroism10.1063/1.4902329 ↗
41. Magnetism in grain-boundary phase of a NdFeB sintered magnet studied by spin-polarized scanning electron microscopy10.1063/1.4883487 ↗
42. Magnetism of ultrathin intergranular boundary regions in Nd–Fe–B permanent magnets10.1016/j.actamat.2014.03.013 ↗
43. Temperature dependent magnetization reversal process of a Ga-doped Nd-Fe-B sintered magnet based on first-order reversal curve analysis10.1016/j.actamat.2019.08.004 ↗
44. K. Löwe, W. Fernengel, K. Skokov and O. Gutfleisch, Artificial permanent magnet and method for producing the artificial permanent magnet, WO/2016/180912 AI (2016).
45. Upscaling the 2-powder method for the manufacturing of heavy rare-earth-lean sintered didymium-based magnets10.1002/adem.202100459 ↗
46. Diffusion behavior of heavy rare-earths for grain boundary engineering of sintered Nd-Fe-B-based permanent magnets produced by the 2-powder method10.1016/j.actamat.2024.119871 ↗
47. Gault · 2012
48. Larson · 2013
49. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
50. Coercivity enhancement in Dy-free sintered Nd-Fe-B magnets by effective structure optimization of grain boundaries10.1016/j.jallcom.2017.11.115 ↗
51. Magnetization measurements for grain boundary phases in Ga-doped Nd-Fe-B sintered magnet10.1016/j.jallcom.2018.04.055 ↗
52. Structure and chemical compositions of the grain boundary phase in Nd-Fe-B sintered magnets10.1016/j.actamat.2016.05.035 ↗
53. Enormous improvement of the coercivity of Ga and Cu co-doping Nd-Fe-B sintered magnet by post-sinter annealing10.1016/j.jallcom.2021.162418 ↗
54. In situ TEM study of Nd-rich phase in NdFeB magnet10.1016/j.jmmm.2004.07.035 ↗
55. On the grain-boundary phase in iron rare-earth boron magnets10.1063/1.337849 ↗
56. Phase transformation induced transitional twin boundary in body-centered cubic metals10.1016/j.actamat.2023.118815 ↗
57. Deformation twinning in body-centered cubic metals and alloys10.1016/j.pmatsci.2023.101160 ↗
58. Effective interactions and atomic ordering in Ni-rich Ni-Re alloys10.1103/PhysRevB.94.024111 ↗
59. Exploration and investigation of stable novel Al2O3 by high-throughput screening and density functional theory10.1016/j.jmrt.2023.02.050 ↗
60. High-energy NdFeB magnets and their applications10.1007/BF02645846 ↗
61. Dysprosium diffusion behavior and microstructure modification in sintered Nd-Fe-B magnets via dual-alloy method10.1109/TMAG.2013.2243128 ↗
62. Coercivity enhancement in Nd–Fe–B sintered permanent magnet by Dy nanoparticles doping10.1016/j.jallcom.2010.04.030 ↗
63. Coercivity and its thermal stability of Nd–Fe–B hot-deformed magnets enhanced by the eutectic grain boundary diffusion process10.1016/j.actamat.2018.09.018 ↗
64. Effect of DyHx addition on the elemental distribution, magnetization reversal and coercivity in sintered Nd–Fe–B magnets10.1088/2053-1591/ab5b21 ↗
65. Coercivity enhancement of Nd–Fe–B sintered magnets with intergranular adding (Pr, Dy, Cu)−Hx powders10.1016/j.jmmm.2015.09.071 ↗
66. Effect of DyF3 additions on the coercivity and grain boundary structure in sintered Nd–Fe–B magnets10.1016/j.scriptamat.2011.03.011 ↗
67. Dysprosium-saving improvement of coercivity in Nd-Fe-B sintered magnets by Dy2S3 additions10.1063/1.3574444 ↗
68. Effects of Dy71.5Fe28.5 intergranular addition on the microstructure and the corrosion resistance of Nd–Fe–B sintered magnets10.1016/j.jmmm.2015.02.043 ↗
69. Rapid coercivity increment of Nd–Fe–B sintered magnets by Dy69Ni31 grain boundary restructuring10.1016/j.jmmm.2014.06.051 ↗
70. Improvement of the thermal stability of sintered Nd-Fe-B magnets by intergranular addition of Dy82.3Co17.710.1063/1.4868491 ↗
71. High coercivity Nd-Fe-B magnets with lower dysprosium content10.1063/1.340728 ↗
72. Enhanced magnetic properties in chemically inhomogeneous Nd-Dy-Fe-B sintered magnets by multi-main-phase process10.1016/j.jre.2020.04.017 ↗
73. Revisiting the demagnetization curves of Dy-diffused Nd-Fe-B sintered magnets10.1016/j.jmmm.2020.167280 ↗
74. Production of thick high-performance sintered neodymium magnets by grain boundary diffusion treatment with dysprosium–nickel–aluminum alloy10.1016/j.jmmm.2010.09.021 ↗
75. Effect of Heat treatment time on Dy–Cu alloy diffusion process in dy-containing commercial Nd–Fe–B sintered magnets10.1007/s40195-017-0660-x ↗
76. Simultaneous enhancement of the coercivity and remanence at high temperatures in a sintered Nd-Fe-B magnet after grain boundary diffusion with Dy60Co40 alloy10.1016/j.matchar.2018.08.012 ↗
77. Dependence of the demagnetization behavior on the direction of grain boundary diffusion in sintered Nd-Fe-B magnets10.1016/j.jmmm.2018.06.023 ↗
78. Microstructure, magnetic properties and diffusion mechanism of DyMg co-deposited sintered Nd-Fe-B magnets10.1016/j.jallcom.2019.153002 ↗
79. Simultaneous application of Dy–X (X= F or H) powder doping and dip-coating processes to Nd–Fe–B sintered magnets10.1016/j.actamat.2015.04.019 ↗
80. The grain-boundary diffusion process in Nd–Fe–B sintered magnets based on the electrophoretic deposition of DyF310.1016/j.intermet.2011.11.014 ↗
81. Elemental distribution near the grain boundary in a Nd–Fe–B sintered magnet subjected to grain-boundary diffusion with Dy2O310.2320/matertrans.MT-M2019265 ↗
82. Improvement of DyF3 diffusion efficiency in sintered Nd-Fe-B magnets by stack diffusion technology10.1016/j.jmmm.2018.12.047 ↗
83. Anisotropic diffusion mechanism in grain boundary diffusion processed Nd–Fe–B sintered magnet10.1016/j.actamat.2016.04.019 ↗
84. Coercivity enhancement of recycled Nd–Fe–B sintered magnets by grain boundary diffusion with DyH3 nano-particles10.1016/j.physb.2015.03.013 ↗
85. Coercivity enhancement of sintered Nd–Fe–B magnets by efficiently diffusing DyF3 based on electrophoretic deposition10.1016/j.jallcom.2015.01.078 ↗
86. Magnetic and microstructural characteristics of DyF3/DyH dip-coated Nd–Fe–B sintered magnets10.1016/j.jallcom.2014.05.166 ↗
87. Effect of surface etching on the magnetic properties and grain-boundary Dy-diffusion in DyH2-dip-coated sintered Nd-Fe-B magnets10.1007/s12540-015-4337-6 ↗
88. Low melting-point diffusion salts of heavy rare-earth for enhancing coercivity of grain-boundary-diffusion-processed Nd-Fe-B-type magnet10.4283/JMAG.2020.25.2.205 ↗
89. The dual trend of diffusion of heavy rare earth elements during the grain boundary diffusion process for sintered Nd-Fe-B magnets10.1016/j.scriptamat.2018.01.021 ↗
90. Study on the corrosion resistance of (Nd,Dy)–Fe–B magnets obtained by grain boundary diffusion method
91. Microstructure and coercivity of grain boundary diffusion processed Dy-free and Dy-containing Nd–Fe–B sintered magnets10.1016/j.actamat.2019.04.032 ↗
92. Temperature-dependent Dy diffusion processes in Nd–Fe–B permanent magnets10.1016/j.actamat.2014.09.039 ↗
93. The mechanism of coercivity enhancement by the grain boundary diffusion process of Nd–Fe–B sintered magnets10.1016/j.actamat.2012.12.018 ↗
94. Formation of anti-shell/core structure of heavy rare earth elements (Tb, Dy) in sintered Nd-Fe-B magnet after grain boundary diffusion process10.1016/j.scriptamat.2018.12.034 ↗
95. Influence of Al/Cu content on grain boundary diffusion in Nd-Fe-B magnet via in-situ observation10.1016/j.jre.2018.07.010 ↗
96. Grain boundary diffusion of magnetron sputter coated heavy rare earth elements in sintered Nd-Fe-B magnet10.1063/1.5023092 ↗
97. Influence of annealing temperature on the Dy diffusion process in NdFeB magnets10.1016/j.jmmm.2016.11.111 ↗
98. Dy Electrodeposition on sintered Nd-Fe-B
99. Further enhancing the coercivity of Nd-Tb-Fe-B sintered magnets by Dy grain boundary diffusion10.1016/j.matlet.2020.128718 ↗