Modeling the effect of electrolyte microstructure on conductivity and solid-state Li-ion battery performance
Source abstract
Abstract
Solid-state batteries offer the potential to improve safety, cyclability, and energy density of Li-ion batteries. However, their conductivity, stability, and processing limit their use. To this end, the effects of solid electrolyte microstructure on overall battery performance are determined. The conductivities of Al-doped Li7La3Zr2O12 (Al-LLZO), with a range of microstructures, are found using a resistor network model. Varying electrolyte properties are combined with a Li-metal negative electrode and LiCoO2 positive electrode in a 1-D continuum model to predict the effects on performance. Simulations suggest that the ratio of electrolyte conductivity to electrolyte thickness must remain above 10 S m−2 to maintain high energy and power output, particularly at C-rates greater than 10. To maintain conductivity near the grain interior conductivity, a grain size at least 10,000 times larger than grain boundary thickness is needed. Further improvements in grain size, grain boundary thickness, and void fraction beyond typical Al-LLZO microstructures, with the goal of higher conductivities, are predicted to have diminishing returns in overall battery performance, even at more sensitive high C-rates up to 100.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Review on solid electrolytes for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.04.022 ↗
2. Interfacial challenges in solid-state Li ion batteries10.1021/acs.jpclett.5b02352 ↗
3. Sulfide and oxide inorganic solid electrolytes for all-solid-state Li batteries: a review10.3390/nano10081606 ↗
4. Garnet-type solid-state fast Li ion conductors for Li batteries: critical review10.1039/c4cs00020j ↗
5. Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries10.1016/j.jpowsour.2018.04.019 ↗
6. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
7. Modified Li7La3Zr2O12 (LLZO) and LLZO-polymer composites for solid-state lithium batteries10.1016/j.ensm.2021.04.016 ↗
8. Structure and dynamics of the fast lithium ion conductor ‘Li7La3Zr2O1210.1039/c1cp22108f ↗
9. Defect chemistry in cubic Li6.25Al0.25La3Zr2O12 solid electrolyte: a density functional theory study10.1016/j.ssi.2019.04.023 ↗
10. Critical challenges and progress of solid garnet electrolytes for all-solid-state batteries10.1016/j.mtchem.2020.100368 ↗
11. Al/Ga-Doped Li 7 La 3 Zr 2 O 12 garnets as Li-ion solid-state battery electrolytes: atomistic insights into local coordination environments and their influence on 17 O, 27 Al, and 71 Ga NMR spectra10.1021/jacs.9b12685 ↗
12. Al-doped Li7La3Zr2O12 synthesized by a polymerized complex method10.1016/j.jpowsour.2011.05.065 ↗
13. Designing inorganic electrolytes for solid-state Li-ion batteries: a perspective of LGPS and garnet10.1016/j.mattod.2021.03.013 ↗
14. Cell failures of all-solid-state lithium metal batteries with inorganic solid electrolytes: lithium dendrites10.1016/j.ensm.2020.07.024 ↗
15. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes10.1038/s41560-018-0312-z ↗
16. In-situ optical observation of Li growth in garnet-type solid state electrolyte10.1016/j.ensm.2021.07.023 ↗
17. Review—practical challenges hindering the development of solid state Li ion batteries10.1149/2.1571707jes ↗
18. Reviewing the current status and development of polymer electrolytes for solid-state lithium batteries10.1016/j.ensm.2020.08.014 ↗
19. Insight into the microstructure and ionic conductivity of cold sintered NASICON solid electrolyte for solid-state batteries10.1021/acsami.9b08132 ↗
20. Effect of surface microstructure on electrochemical performance of garnet solid electrolytes10.1021/am508111r ↗
21. Influence of chemical microstructure of single-ion polymeric electrolyte membranes on performance of lithium-ion batteries10.1021/am503152m ↗
22. Reduced energy barrier for Li+ transport across grain boundaries with amorphous domains in LLZO thin films10.1186/s11671-020-03378-x ↗
23. Resolving the grain boundary and lattice impedance of hot-pressed Li 7 La 3 Zr 2 O 12 garnet electrolytes10.1002/celc.201300022 ↗
24. Microstructure and Li-ion conductivity of hot-pressed cubic Li 7 La 3 Zr 2 O 1210.1111/jace.13455 ↗
25. Recent developments in garnet based solid state electrolytes for thin film batteries10.1016/j.cossms.2013.10.002 ↗
26. Modeling, preparation, and elemental doping of Li7La3Zr2O12 garnet-type solid electrolytes: a review10.4191/kcers.2019.56.2.01 ↗
27. Effect of microstructure and surface impurity segregation on the electrical and electrochemical properties of dense Al-substituted Li 7 La 3 Zr 2 O 1210.1039/C3TA13999A ↗
28. Electron microscopy characterization of hot-pressed Al substituted Li7La3Zr2O1210.1007/s10853-012-6300-y ↗
29. The role of Al and Li concentration on the formation of cubic garnet solid electrolyte of nominal composition Li7La3Zr2O1210.1016/j.ssi.2011.10.022 ↗
30. Grain boundary complexions10.1016/j.actamat.2013.07.037 ↗
31. Field assisted sintering of dense Al-substituted cubic phase Li7La3Zr2O12 solid electrolytes10.1016/j.jpowsour.2014.03.148 ↗
32. High-purity and high-density cubic phase of Li7La3Zr2O12 solid electrolytes by controlling surface/volume ratio and sintering pressure10.1016/j.electacta.2020.136965 ↗
33. Al stabilized Li7La3Zr2O12 solid electrolytes for all-solid state Li-ion batteries10.1016/j.ijhydene.2016.03.197 ↗
34. A low ride on processing temperature for fast lithium conduction in garnet solid-state battery films10.1038/s41560-019-0384-4 ↗
35. Fabrication and characterization of Li7La3Zr2O12 thin films for lithium ion battery10.1149/2.013206ssl ↗
36. Fast charge transfer across the Li 7 La 3 Zr 2 O 12 solid electrolyte/LiCoO 2 cathode interface enabled by an interphase-engineered all-thin-film architecture10.1021/acsami.0c09777 ↗
37. A bird’s-eye view of Li-stuffed garnet-type Li 7 La 3 Zr 2 O 12 ceramic electrolytes for advanced all-solid-state Li batteries10.1039/C9EE01548E ↗
38. Study of Li atom diffusion in amorphous Li3PO4 with neural network potential10.1063/1.4997242 ↗
39. Insight into the grain boundary effect on the ionic transport of yttria-stabilized zirconia at elevated temperatures from a molecular modeling perspective10.1016/j.jpowsour.2011.07.085 ↗
40. Atomic-scale influence of grain boundaries on Li-ion conduction in solid electrolytes for all-solid-state batteries10.1021/jacs.7b10593 ↗
41. Grain boundary contributions to Li-ion transport in the solid electrolyte Li 7 La 3 Zr 2 O 12 (LLZO)10.1021/acs.chemmater.7b02805 ↗
42. Modeling the effective conductivity of the solid and the pore phase in granular materials using resistor networks10.1016/j.powtec.2019.04.005 ↗
43. Numerical study of grain boundary effect on Li+ effective diffusivity and intercalation-induced stresses in Li-ion battery active materials10.1016/j.jpowsour.2013.03.135 ↗
44. Modeling all-solid-state Li-ion batteries10.1149/1.3521414 ↗
45. Modeling and simulation of 2D lithium-ion solid state battery: effects of materials and geometry on the performance of SSB10.1002/er.3344 ↗
46. Impedance based time-domain modeling of lithium-ion batteries: Part I10.1016/j.jpowsour.2018.01.043 ↗
47. Model formulation and simulation of a solid-state lithium-based cell10.1016/j.electacta.2012.10.110 ↗
48. An advanced all-solid-state Li-ion battery model10.1016/j.electacta.2019.135147 ↗
49. Modeling of all-solid-state thin-film Li-ion batteries: accuracy improvement10.1016/j.ssi.2019.02.003 ↗
50. Charge/discharge simulation of an all-solid-state thin-film battery using a one-dimensional model10.1149/2.041202jes ↗
51. 2005
52. The influence of non-ideal microstructures on the analysis of grain boundary impedances10.1016/S0167-2738(00)00627-5 ↗
53. The grain boundary impedance of random microstructures: numerical simulations and implications for the analysis of experimental data10.1016/S0167-2738(02)00274-6 ↗
54. Three-dimensional site percolation problem and effective-medium theory: a computer study10.1007/BF01020426 ↗
55. Classical transport in disordered media: scaling and effective-medium theories10.1103/PhysRevLett.27.1722 ↗
56. S. Mittal, “A Study of Successive Over-relaxation (SOR) Method Parallelization over Modern HPC Languages,” p. 6.
57. Diffusion coefficient of lithium ions in garnet-type Li6.5La3Zr1.5Ta0.5O12 single crystal probed by 7Li pulsed field gradient-NMR spectroscopy10.1016/j.ssi.2018.10.016 ↗
58. Relationship between conductivity, ion diffusion, and transference number in perfluoropolyether electrolytes10.1021/acs.macromol.6b00412 ↗
59. All-Solid-State Lithium-Ion Battery.” COMSOL.
60. Elucidating the role of dopants in the critical current density for dendrite formation in garnet electrolytes10.1039/C8TA08366E ↗
61. Elastic properties of the solid electrolyte Li 7 La 3 Zr 2 O 12 (LLZO)10.1021/acs.chemmater.5b03854 ↗
62. Grain boundary ionic conductivity of yttrium stabilized zirconia as a function of silica content and grain size10.1016/S0167-2738(03)00265-0 ↗
63. The effect of relative density on the mechanical properties of hot‐pressed cubic Li 7 La 3 Zr 2 O 1210.1111/jace.14084 ↗
64. Effect of pore connectivity on Li dendrite propagation within LLZO electrolytes observed with synchrotron X-ray tomography10.1021/acsenergylett.8b00249 ↗
65. Electrochemical nature of the cathode interface for a solid-state lithium-ion battery: interface between LiCoO 2 and garnet-Li 7 La 3 Zr 2 O 1210.1021/acs.chemmater.6b03870 ↗
66. Interrelationships among grain size, surface composition, air stability, and interfacial resistance of Al-substituted Li 7 La 3 Zr 2 O 12 solid electrolytes10.1021/acsami.5b02528 ↗
67. Lithium ion micrometer diffusion in a garnet-type cubic Li 7 La 3 Zr 2 O 12 (LLZO) studied using 7 Li NMR spectroscopy10.1063/1.4973827 ↗