Cathode durability enhancement under start-up/shut-down process using IrRuOx/C catalyst in polymer electrolyte membrane fuel cell
Source abstract
Abstract
Abstract The disruptive degradation of the electrode in the membrane electrode assembly (MEA) under the transient situation during the fuel cell electric vehicle operations such as fuel starvation, start-up and shut-down (SU/SD), etc. is to be addressed. To mitigate the carbon corrosion in the electrode, the catalyst for oxygen evolution reaction (OER) has been investigated recently. It evolves oxygen from water, thereby mitigating carbon corrosion at voltages over 1.5 V, which is typically induced during SU/SD cycles. In this study, carbon-supported IrRuOx catalysts towards OER are synthesized using a sub-substrate method, and their electrochemical and physicochemical properties are analyzed using several methods. Ir1Ru1Ox (Ir:Ru = 1:1 at. ratio in the oxide form) is observed to be the best catalyst in terms of activity and durability. The application of a 2.5 wt% OER catalyst to the cathode improves the carbon corrosion durability of the MEA by approximately 88 %. After 4000 SU/SD cycles, the electrochemical surface areas of the Pt in the OER-added MEA and reference MEA are reduced by 15 % and 57 %, respectively. When the OER catalyst is applied to the reference cathode electrode, it enhances the durability of the MEA without compromising the performance significantly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective10.1021/acsenergylett.6b00644 ↗
2. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
3. Hong · ECS Trans · 2018 · 86 · 310.1149/08613.0003ecst ↗
4. Kongkanad · J. Phys. Chem. Lett. · 2016 · 7 · 112710.1021/acs.jpclett.6b00216 ↗
5. Papageorgopoulos
6. A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: caused, consequences, and mitigation strategies10.1016/j.jpowsour.2012.01.059 ↗
7. Deleterious effects of interim cyclic voltammetry on Pt/carbon black catalyst degradation during start-up/shutdown cycling evaluation10.1016/j.electacta.2013.12.120 ↗
8. A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition10.1016/j.apenergy.2018.04.049 ↗
9. Robust operation of fuel cell systems in subfreezing conditions: a material-based solution to achieve better anode durability10.1021/acsaem.9b01108 ↗
10. Boosting fuel cell durability under shut-down/start-up conditions using a hydrogen oxidation-selective metal–carbon hybrid core–shell catalyst10.1021/acsami.9b06309 ↗
11. Effect of residual oxygen partial pressure on the degradation of polymer electrolyte membrane fuel cells under reverse current conditions10.1016/j.jpowsour.2011.09.085 ↗
12. Hydrogen oxidation-selective electrocatalysis by fine tuning of Pt ensemble sites to enhance the durability of automotive fuel cells10.1002/cssc.201601274 ↗
13. Novel strategy to mitigate cathode catalyst degradation during air/air startup cycling via the atmospheric resistive switching mechanism of a hydrogen anode with a platinum catalyst supported on tantalum-doped titanium dioxide10.1016/j.jpowsour.2015.06.072 ↗
14. Multi-functional anodes boost the transient power and durability of proton exchange membrane fuel cells10.1038/s41467-020-14822-y ↗
15. Stability of Pt/MWCNT electrocatalyst during startup and shutdown cycles: voltage degradation in PEM fuel cells10.1149/1.2356199 ↗
16. Study on durability of Pt supported on graphitized carbon under simulated start-up/shut-down conditions for polymer electrolyte membrane fuel cells10.1016/j.jechem.2017.05.012 ↗
17. Durability of Pt catalysts supported on graphitized carbon-black during gas-exchange start-up operation similar to that used for fuel cell vehicles10.1149/2.0771607jes ↗
18. PEM fuel cell start-up/shut-down losses vs temperature for non-graphitized and graphitized cathode carbon supports10.1149/2.1061702jes ↗
19. Impact of IrRu oxygen evolution reaction catalysts on Pt nanostructured thin films under start-up/shutdown cycling10.1016/j.jpowsour.2014.06.153 ↗
20. Durability of unsupported Pt-Ni aerogels in PEFC cathodes10.1149/2.0131712jes ↗
21. High surface area synthesis, electrochemical activity, and stability of tungsten carbide supported Pt during oxygen reduction in proton exchange membrane fuel cells10.1016/j.jpowsour.2007.12.105 ↗
22. An oxidation-resistance indium tin oxide catalyst support for proton exchange membrane fuel cells10.1016/j.jpowsour.2006.05.014 ↗
23. Pt/IrO2–TiO2 cathode catalyst for low temperature polymer electrolyte fuel cell – application in MEAs, performance and stability issues10.1016/j.cattod.2015.09.009 ↗
24. Benefits and limitations of Pt nanoparticles supported on highly porous antimony-doped tin dioxide aerogel as alternative cathode material for proton-exchange membrane fuel cells10.1016/j.apcatb.2016.08.010 ↗
25. Platinum supported on titanium–ruthenium oxide is a remarkably stable electrocatalyst for hydrogen fuel cell vehicles10.1073/pnas.1319663111 ↗
26. The inhibition of electrochemical carbon corrosion in polymer electrolyte membrane fuel cells using iridium nanodendrites10.1016/j.ijhydene.2011.10.072 ↗
27. Attenuated degradation of a PEMFC cathode during fuel starvation by using carbon-supported IrO210.1016/j.electacta.2012.12.034 ↗
28. Oxygen evolution Co-catalysts at fuel cell cathodes for degradation mitigation during simulated start-up shut-down cycles10.1149/1.3210607 ↗
29. A materials-based mitigation strategy for SU/SD in PEM fuel cells10.1149/2.006303eel ↗
30. Atanasoski · 2015
31. Nano-fabrication and Characterization of new conceptual platinum catalysts for low temperature fuel cells10.1016/j.electacta.2006.09.048 ↗
32. Atanasoski · 2012 · FC006
33. Electrochemical investigation of electrocatalysts for the oxygen evolution reaction in PEM water electrolyzers10.1016/j.ijhydene.2008.06.039 ↗
34. Activity–stability trends for the oxygen evolution reaction on monometallic oxides in acidic environments10.1021/jz501061n ↗
35. Three-dimensional mesoporous Ir–Ru binary oxides with improved activity and stability for water electrolysis10.1016/j.cattod.2019.10.004 ↗
36. Effect of adding CeO2 to RuO2–IrO2 mixed nanocatalysts: activity towards the oxygen evolution reaction and stability in acidic media10.1002/celc.201500072 ↗
37. IrO2 coated on RuO2 as efficient and stable electroactive nanocatalysts for electrochemical water splitting10.1021/acs.jpcc.5b11868 ↗
38. Jin · 2013
39. Highly durable, cost-effective, and multifunctional carbon-supported IrRu-based catalyst for automotive polymer electrolyte fuel cell anodes10.1149/2.0121806jes ↗
40. Multifunctional non-Pt ternary catalyst for the hydrogen oxidation and oxygen evolution reactions in reversal-tolerant anode10.1016/j.catcom.2019.105758 ↗
41. Optimization of carbon-supported Ir–Ru alloys for polymer electrolyte fuel cell anodes under cell reversal10.1016/j.jiec.2020.01.024 ↗
42. Preparation and characterization of supported RuxIr(1-x)O2 nano-oxides using a modified polyol synthesis assisted by microwave activation for energy storage applications10.1016/j.apcatb.2016.07.048 ↗