Investigation of “Na2/3Co2/3Ti1/3O2” as a multi-phase positive electrode material for sodium batteries
Source abstract
Abstract
Abstract Co-based layered “Na2/3Co2/3Ti1/3O2” oxide is prepared via a solid-state process and investigated in sodium half-cells. X-ray diffraction reveals the presence of several phases in the pristine material with P2 and P3 structure types as the main phases.The mixture of phases shows a smooth charge/discharge curve and the potential steps previously observed for Na2/3Co1-yTiyO2 (y = 0, 0.05, 0.1) have completely vanished. This phase mixture delivers high charge and discharge capacities of 110.5 and104.5 mAh.g−1, respectively, in the potential range 2–4.2 V as well as a high rate capability. The desodiation/sodiation process of “Na2/3Co2/3Ti1/3O2” is investigated by operando diffraction using synchrotron radiation. The P2 structure-type remains stable in the investigated potential window and dominates the electrochemical activity. Electrochemical impedance spectroscopy was conducted during the first charge/discharge cycle and over cycling. The results show that, from OCV till the end of charge, two semi-circles appear in the Nyquist diagram and merge during the following discharge. The total cell impedance increases drastically during Na-insertion at high sodium content (from 50 Ω at 4 V to 375 Ω at 2 V).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. The use of acetates as precursors for the low-temperature synthesis of LiMn2O4 and LiCoO2 intercalation compounds10.1016/0022-4596(91)90231-6 ↗
2. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
3. Battery, ultracapacitor, fuel cell, and hybrid energy storage systems for electric, hybrid electric, fuel cell, and plug-in hybrid electric vehicles: state of the art
4. Research development on sodium-ion batteries10.1021/cr500192f ↗
5. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
6. Challenges in developing electrodes, electrolytes, and diagnostics tools to understand and advance sodium‐ion batteries
7. Transition metal oxides for sodium-ion batteries10.1016/j.ensm.2016.06.005 ↗
8. Research development on sodium-ion batteries10.1021/cr500192f ↗
9. NaCrO2 is a fundamentally safe positive electrode material for sodium-ion batteries with liquid electrolytes10.1149/2.002201esl ↗
10. Electrochemical properties of mono- clinic NaNiO210.1149/2.023302jes ↗
11. Synthesis and stoichiometry of different layered sodium cobalt oxides10.1021/cm5021788 ↗
12. A stable layered oxide cathode material for high‐performance sodium‐ion battery10.1002/aenm.201803978 ↗
13. Progress in high‐voltage cathode materials for rechargeable sodium‐ion batteries10.1002/aenm.201701785 ↗
14. Recent progress of layered transition metal oxide cathodes for sodium‐ion batteries10.1002/smll.201805381 ↗
15. A comparative study of layered transition metal oxide cathodes for application in sodium-ion battery10.1021/am5080437 ↗
16. Electrochemical intercalation of sodium in NaxCoO2 bronzes10.1016/0167-2738(81)90076-X ↗
17. High-temperature phase transition in the three-layered sodium cobaltite P3-NaxCoO2 (x=0.62)10.1103/PhysRevB.77.184116 ↗
18. Electrode materials for rechargeable sodium‐ion batteries: potential alternatives to current lithium‐ion batteries10.1002/aenm.201200026 ↗
19. Crystal structures and electrode performance of alpha-NaFeO2 for rechargeable sodium batterie
20. Layered oxides as positive electrode materials for Na-ion batteries10.1557/mrs.2014.85 ↗
21. An advanced cathode for Na-ion batteries with high rate and excellent structural stability
22. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
23. Electrochemical investigation of the P2–NaxCoO2 phase diagram10.1038/nmat2920 ↗
24. Electrode properties of P2−Na2/3MnyCo1−yO2 as cathode materials for sodium-ion batteries10.1021/jp406433z ↗
25. P2-Na0.67Co0.5Mn0.5O2 cathode material with excellent rate capability and cycling stability for sodium ion batteries10.1039/C6TA02845D ↗
26. NaFe0.5Co0.5O2 as high energy and power positive electrode for Na-ion batteries10.1016/j.elecom.2013.05.012 ↗
27. Investigation of P2-Na2/3Mn1/3Fe1/3Co1/3O2 for Na-ion battery positive electrodes10.1149/2.0981414jes ↗
28. New P2 - Na0.70Mn0.60Ni0.30Co0.10O2 layered oxide as electrode material for Na-ion batteries10.1149/2.0121414jes ↗
29. Electrochemical properties of NaNi1/3Co1/3Fe1/3O2 as a cathode material for Na-ion batteries10.1016/j.elecom.2013.11.015 ↗
30. Nanostructured Ti-based anode materials for Na-ion batteries10.1039/C6TA04611H ↗
31. Irreversible made reversible: increasing electrochemical capacity by understanding the structural transformations of NaxCo0.5Ti0.5O210.1021/acsami.8b11609 ↗
32. Unraveling the role of Ti in the stability of positive layered oxide electrodes for rechargeable Na-ion batteries10.1039/C9TA02710F ↗
33. Na+/vacancy disordering promises high-rate Na-ion batteries
34. Layered P2-Na2/3Co1/2Ti1/2O2 as a high-performance cathode material for sodium-ion batteries10.1016/j.jpowsour.2017.01.025 ↗
35. Effect of titanium substitution in a P2-Na2/3Co0.95Ti0.05O2 cathode material on the structural and electrochemical properties10.1021/acsami.7b11636 ↗
36. Evidence of a pseudo‐capacitive behavior combined with an insertion/extraction reaction upon cycling of the positive electrode material P2‐NaxCo0.9Ti0.1O2 for sodium‐ion batteries10.1002/celc.201801870 ↗
37. Electrochemical Property−Structure correlation for Ni-based layered Na-ion cathodes10.1021/acsami.8b10519 ↗
38. In situ investigation of layered oxides with mixed structures for sodium-ion batteries10.1002/smtd.201900239 ↗
39. Layered P2/O3 intergrowth cathode: toward high power Na-ion batteries10.1002/aenm.201400458 ↗
40. The new material science powder diffraction beamline at ALBA synchrotron
41. A novel high-throughput setup for in situ powder diffraction on coin cell batteries10.1107/S1600576715022165 ↗
42. Recent advances in magnetic structure determination by neutron powder diffraction
43. hartree-slater subshell photoionization cross-sections at 1254 and 1487 ev10.1016/0368-2048(76)80015-1 ↗
44. Routes to high energy cathodes of sodium‐ion batteries
45. Improved cycle and air stability of P3 Na0.65Mn0.75Ni0.25O2 electrode for sodium-ion batteries coated with metal phosphates10.1016/j.cej.2019.05.010 ↗
46. Sodium‐ion batteries: from academic research to practical commercialization10.1002/aenm.201701428 ↗
47. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
48. A comprehensive study of the role of transition metals in O3-type layered Na[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, and 0.8) cathodes for sodium-ion batteries10.1039/C6TA07392A ↗
49. P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries10.1038/ncomms7954 ↗
50. Contribution à l’étude électrochimique du système P2-NaxCoO2 Synthèse et caractérisation de nouveaux oxydes lamellaires ordonnés (A/A’)CoO2
51. High voltage structural evolution and enhanced Na-ion diffusion in P2-Na2/3Ni1/3−xMgxMn2/3O2 (0≤ x ≤0.2) cathodes from diffraction, electrochemical and ab initio studies10.1039/C7EE02995K ↗
52. Layered oxide cathodes for sodium‐ion batteries: phase transition, air stability, and performance10.1002/aenm.201701912 ↗
53. P2-NaxMn1/2Fe1/2O2 phase used as positive electrode in Na batteries: structural changes induced by the electrochemical (De)intercalation process
54. Structure of the high voltage phase of layered P2-Na2/3−z[Mn1/2Fe1/2]O2 and the positive effect of {Ni} substitution on its stability10.1039/C5EE01365H ↗
55. Somerville, J-W, Sobkowiak, A., Tapia-Ruiz, N., Billaud, J., Lozano, J-G., House, R-A., Gallington, L-C., Ericsson, T., Haggstrom, L., Roberts, M-R., Maitra, U., Bruce, P-G. Nature of the ‘‘Z’’-phase in Layered Na-Ion Battery Cathodes.
56. Layered Na‐ion cathodes with outstanding performance resulting from the synergetic effect of mixed P‐ and O‐type phases10.1002/aenm.201501555 ↗
57. Reduction reactions of electrolyte salts for lithium ion batteries: LiPF6, LiBF4, LiDFOB, LiBOB, and LiTFSI10.1149/2.0901802jes ↗
58. Composition and evolution of the solid-electrolyte interphase in Na2Ti3O7 electrodes for Na-ion batteries: XPS and auger parameter analysis10.1021/acsami.5b01375 ↗
59. Study of transport properties and interfacial kinetics of Na2/3[Ni1/3MnxTi2/3-x]O2 (x = 0,1/3) as electrodes for Na-ion batteries10.1149/2.0201501jes ↗
60. Nanoporous hard carbon anodes for improved electrochemical performance in sodium ion batteries10.1016/j.electacta.2015.02.086 ↗