journal article·2019-11

Aging and performance comparison of absorbed glass matte, enhanced flooded, PbC, NiZn, and LiFePO4 12V start stop vehicle batteries

Phillip J. Kollmeyer, Thomas M. Jahns

Publisher page

Abstract

Abstract Engine start-stop systems have been widely adopted for internal combustion engine passenger vehicles, with low voltage 12 V systems currently capturing most of the market. While absorbed glass mat (AGM) lead-acid batteries are commonly used for this application, there is interest in other battery types to reduce cost or improve performance. This work examines a range of battery types and compares experimentally determined performance and aging characteristics. Six different start/stop batteries are tested, including two AGM, an enhanced flooded lead acid (EFB), lead carbon (PbC), nickel zinc (NiZn), and LiFePO4 battery. The batteries are aged with a series of start-stop microcycles, which consist of an accessory power and engine-starting discharge pulse followed by a charging pulse. Thirty thousand microcycles correlate with the conditions a start-stop battery would be exposed to over approximately 160,000 km of driving in a typical North American application. The testing procedure begins with two characterization tests - a capacity and HPPC charge and discharge resistance test - and is followed by 3,000 microcycles to age the battery. Characterization and aging tests are repeated until the battery is no longer able to perform the microcycles, and substantially different aging and performance characteristics are observed for each battery.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Schlegel und Partner · 2016
2. Focus2move, "World's
3. Lead-acid batteries for micro- and mild-hybrid applications10.1016/j.jpowsour.2008.11.089 ↗
4. Analysis of characteristics for the identification of lead-acid battery technologies used in micro-hybrid vehicles
5. Lead acid based low voltage mild hybrid application in India — merits and challenges
6. Enhancing the performance of lead–acid batteries with carbon – in pursuit of an understanding10.1016/j.jpowsour.2015.07.009 ↗
7. Lead acid battery for idling stop system
8. Effects of carbon additives on the performance of negative electrode of lead-carbon battery10.1016/j.electacta.2014.11.027 ↗
9. Enhanced performance of starter lighting ignition type lead-acid batteries with carbon nanotubes as an additive to the active mass10.1016/j.jpowsour.2015.07.007 ↗
10. Influences of carbon materials and lignosulfonates in the negative active material of lead-acid batteries for microhybrid vehicles10.1016/j.est.2017.01.005 ↗
11. Optimized lead carbon composite for enhancing the performance of lead-carbon battery under HRPSoC operation10.1016/j.jelechem.2018.10.022 ↗
12. Highly reversible lead-carbon battery anode with lead grafting on the carbon surface10.1016/j.jechem.2018.03.002 ↗
13. VRLA Ultrabattery for high-rate partial-state-of-charge operation10.1016/j.jpowsour.2007.05.047 ↗
14. Lead batteries for utility energy storage: a review10.1016/j.est.2017.11.008 ↗
15. Electrochemical capacitors10.1023/A:1020220425954 ↗
16. Identification and remediation of sulfation in lead-acid batteries using cell voltage and pressure sensing10.1016/j.jpowsour.2012.08.013 ↗
17. Modeling and experimental validation of a hybridized energy storage system for automotive applications10.1016/j.jpowsour.2013.04.017 ↗
18. A study on the performance of the improved energy storage system for mild hybrid vehicles
19. Progress in the development of lead-acid batteries for hybrid electric vehicles
20. Modeling of the capacity loss of a 12V automotive lead-acid battery due to ageing and comparison with measurement data10.1016/j.jpowsour.2008.12.091 ↗
21. Modeling of the cranking and charging processes of conventional valve regulated lead acid (VRLA) batteries in micro-hybrid applications10.1016/j.jpowsour.2014.04.026 ↗
22. 6 - nickel–metal hydride and nickel–zinc batteries for hybrid electric vehicles and battery electric vehicles
23. Nickel/zinc batteries10.1016/0378-7753(94)01954-1 ↗
24. Nickel-zinc batteries with long cycle life10.1016/S0378-7753(96)02421-4 ↗
25. Enhancing the rate and cycling performance of spherical ZnO anode material for advanced zinc-nickel secondary batteries by combined in-situ doping and coating with carbon10.1016/j.electacta.2017.03.164 ↗
26. Evaluation of the low temperature performance of lithium manganese oxide/lithium titanate lithium-ion batteries for start/stop applications10.1016/j.jpowsour.2014.12.051 ↗
27. 12V Li-ion batteries - ready for mainstream adoption
28. 12 V lithium ion starter batteries
29. Modeling of low-temperature operation of a hybrid energy storage system with a Butler-Volmer equation based battery model
30. Development and realization of lithium-ion battery modules for starting applications and traction of off-road electric vehicles10.3390/wevj6030562 ↗
31. Synthesis and experimental validation of battery aging test profiles based on real-world duty cycles for 48-V mild hybrid vehicles10.1109/TVT.2017.2717187 ↗
32. The impact of DC bias current on the modeling of lithium iron phosphate and lead-acid batteries observed using electrochemical impedance spectroscopy