The influence of porous or solid carbon support on catalyst durability of proton exchange membrane fuel cells
Source abstract
Abstract
The durability of catalysts is heavily influenced by the choice of carbon supports. This study follows U.S. Department of Energy (DOE) testing protocols to evaluate both catalysts and carbon supports, using accelerated degradation tests (ADTs) tailored for catalysts and carbon supports under automotive driving cycles and start-up/shut-down conditions, respectively. Three commercial carbon supports—Ketjen Black ECP-600JD (KB-600), Ketjen Black EC-300J (KB-300), and Vulcan XC-72 (XC-72)—were assessed. Catalysts with KB supports demonstrated superior durability during catalyst-targeted ADTs due to the effective incorporation of platinum (Pt) within their porous structures, preventing Pt migration and agglomeration. Conversely, XC-72, with its solid structure and low surface area, showed increased Pt agglomeration. Interestingly, during carbon support-focused ADTs, XC-72-based catalysts exhibited exceptional durability owing to their impermeable wall structure and higher graphitization, reducing corrosion. Alternatively, KB-based supports, characterized by high surface area, porous structure, and lower graphitization, accelerated corrosion. Consequently, selecting the appropriate carbon support requires thorough consideration in alignment with the specific design goals and operational priorities of fuel cell systems. This highlights the complexity and significance of such decisions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
2. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
3. 2024
4. Review and perspectives of carbon-supported platinum-based catalysts for proton exchange membrane fuel cells10.1021/acs.energyfuels.3c01265 ↗
5. Cathode design for proton exchange membrane fuel cells in automotive applications10.1007/s42154-021-00148-y ↗
6. The relative humidity sensitivity of fuel cell catalyst layer with solid or porous carbon support structure10.1016/j.jpowsour.2023.233202 ↗
7. Effect of different structures of carbon supports for cathode catalyst on performance of direct methanol fuel cell10.1016/j.ijhydene.2015.11.103 ↗
8. PEFC catalyst layers: effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability10.1016/j.coelec.2020.02.019 ↗
9. Effect of mesoporous carbon on oxygen reduction reaction activity as cathode catalyst support for proton exchange membrane fuel cell10.1016/j.ijhydene.2022.06.131 ↗
10. Carbon and non-carbon support materials for platinum-based catalysts in fuel cells10.1016/j.ijhydene.2018.02.154 ↗
11. Perspectives on carbon-alternative materials as Pt catalyst supports for a durable oxygen reduction reaction in proton exchange membrane fuel cells10.1016/j.jpowsour.2022.231422 ↗
12. Advanced nanocarbons for enhanced performance and durability of platinum catalysts in proton exchange membrane fuel cells10.1002/smll.202006805 ↗
13. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): a review10.1016/j.jpowsour.2020.229434 ↗
14. Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC10.1016/j.jpowsour.2007.07.048 ↗
15. Systematic study on the impact of Pt particle size and operating conditions on PEMFC cathode catalyst durability10.1149/2.081111jes ↗
16. Study on durability of proton exchange membrane fuel cell stack based on mesoporous carbon supported platinum catalysts under dynamic cycles conditions10.1016/j.jpowsour.2022.232277 ↗
17. Degradation mechanisms of Pt/C fuel cell catalysts under simulated start–stop conditions10.1021/cs300024h ↗
18. Comparison of degradation behaviors for open-ended and closed proton exchange membrane fuel cells during startup and shutdown cycles10.1016/j.jpowsour.2011.01.075 ↗
19. Insight into carbon corrosion of different carbon supports for Pt-based electrocatalysts using accelerated stress tests in polymer electrolyte fuel cells10.1016/j.jpowsour.2022.232209 ↗
20. Mitigation of PEM fuel cell catalyst degradation with porous carbon supports10.1149/2.0371904jes ↗
21. The impact of the morphology of the carbon support on the activity and stability of nanoparticle fuel cell catalysts10.1039/C6CY01679K ↗
22. Potential-driven instability effect of carbon supports for Pt/C electrocatalysts10.1016/j.carbon.2023.118562 ↗
23. Well-defined mesoporosity on lignocellulosic-derived activated carbons10.1016/j.carbon.2011.08.007 ↗
24. Investigating the corrosion of high surface area carbons during start/stop fuel cell conditions: a Raman study10.1016/j.electacta.2013.10.097 ↗
25. Kongkanand · 2020
26. Boron-alloyed porous network platinum nanospheres for efficient oxygen reduction in proton exchange membrane fuel cells10.1016/j.cej.2024.149998 ↗
27. Mechanistic equivalent circuit modelling of a commercial polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2018.01.066 ↗
28. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
29. Performance and durability of Pt/C cathode catalysts with different kinds of carbons for polymer electrolyte fuel cells characterized by electrochemical and in situ XAFS techniques10.1039/c3cp54457e ↗
30. Impact of carbon support structure on the durability of PtCo electrocatalysts
31. Impact of carbon support structure on the durability of PtCo electrocatalysts10.1149/09809.0505ecst ↗
32. A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells10.1016/j.jpowsour.2009.06.073 ↗
33. Quantification on degradation mechanisms of polymer exchange membrane fuel cell cathode catalyst layers during bus and stationary durability test protocols10.1016/j.jpowsour.2021.230878 ↗
34. Understanding the performance losses and “invasiveness” of in situ characterization steps during carbon corrosion experiments in polymer electrolyte membrane fuel cells10.1016/j.electacta.2021.139537 ↗
35. Effect of carbon black support corrosion on the durability of Pt/C catalyst10.1016/j.jpowsour.2007.06.084 ↗
36. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
37. Accelerated durability tests of catalyst layers with various pore volume for catalyst coated membranes applied in PEM fuel cells10.1016/j.ijhydene.2009.05.022 ↗
38. An extensive study about influence of the carbon support morphology on Pt activity and stability for oxygen reduction reaction10.1016/j.apcatb.2018.02.050 ↗
39. Corrosion and materials degradation in electrochemical energy storage and conversion devices
40. Modeling of wetting phenomena in cathode catalyst layers for PEM fuel cells10.1016/j.electacta.2022.140850 ↗
41. Effect of carbon corrosion on wettability of PEM fuel cell electrodes10.1149/2.0231912jes ↗
42. Hydrophilicity and hydrophobicity study of catalyst layers in proton exchange membrane fuel cells10.1016/j.electacta.2005.06.036 ↗