journal article·2025-02Open access

Improved chemical durability in polymer electrolyte membranes with nanocellulose-based gas barrier interlayers

I Yang, Zulfi Al Rasyid Gautama, Yasir Arafat Hutapea, Miho Ariyoshi, Shigenori Fujikawa, Takeharu Sugiyama, Stephen Matthew Lyth, Kazunari Sasaki, Masamichi Nishihara

Abstract

Enhancing the lifetime of polymer electrolyte fuel cells (PEFCs) is a key factor in accelerating their application in heavy-duty vehicles (HDVs). A major contributing factor to their worsening performance over time is chemical degradation of the polymer electrolyte membrane (PEM). This is largely caused by the generation of reactive oxygen species such as hydroxyl radicals (•OH) or hydrogen peroxide (H 2 O 2 ), which break down the polymer structure. This radical attack results in a loss of ionic conductivity and thus an increase in cell resistance over the operational lifetime. Here we show that adding an interlayer with suitable gas barrier properties can effectively suppress the generation of reactive oxygen species, slow the rate of membrane thinning, and extend the lifetime of the cell. We found that cellulose nanocrystals (CNC) blends with poly(vinyl sulfonic acid) (PVS) are suitable composite materials for the interlayer, combining low oxygen permeability with reasonable proton conductivity. Accelerated degradation of the PEMs was investigated via open circuit voltage (OCV) holding tests, in which the device lifetime was reproducibly extended by the incorporation of the CNC/PVS interlayer. Post-mortem analysis revealed that the rate of membrane thinning at the anode side of the PEM after 100 h test was just 30 nm/h, compared with 80 nm/h without an interlayer. Our results clearly confirm that the incorporation of CNC/PVS interlayers with low oxygen permeability into PEMs can suppress chemical degradation and significantly improve the durability of PEFCs. The obtained results also indicate that the concept of the gas barrier PEM for the improved chemical durability of PEMs can be widely and universally applied. We anticipate that this will contribute to the development of next-generation devices with sufficient lifetime for efficient use in fuel cell electric vehicles (FCEVs), including heavy-duty FCEVs. • Fuel cell application of biomaterial cellulose nanocrystals (CNC). • Multilayered polymer electrolyte membrane (PEM) with a high gas barrier interlayer. • Gas barrier interlayer made of cellulose nanocrystals (CNC). • Suppression of radical formation by a gas barrier interlayer. • Superior chemical durability improvement compared to commercial Nafion.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Fuel Cells and Related Materials · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Advances in the use of cellulose-based proton exchange membranes in fuel cell technology: a review10.1016/j.ijbiomac.2023.125810 ↗
2. Cellulose nanocrystals in sustainable energy systems10.1002/adsu.202100395 ↗
3. Cellulose-based films with enhanced load of nitrogen containing heterocycles: the impact on the surface morphology and proton conductivity10.1016/j.apsusc.2022.155077 ↗
4. Sasaki · 2016
5. Reducing CO₂ emissions from heavy-duty vehicles, Climate Action, European Commission. https://climate.ec.europa.eu/eu-action/transport/road-transport-reducing-co2-emissions-vehicles/reducing-co2-emissions-heavy-duty-vehicles_en.
6. IEC, Net Zero by 2050, A Roadmap for the Global Energy Sector, p.135. https://iea.blob.core.windows.net/assets/deebef5d-0c34-4539-9d0c-10b13d840027/NetZeroby2050-ARoadmapfortheGlobalEnergySector_CORR.pdf.
7. Recent advances in electrocatalysts for proton exchange membrane fuel cells and alkaline membrane fuel cells10.1002/adma.202006292 ↗
8. An overview of the proton conductivity of nafion membranes through a statistical analysis10.1016/j.memsci.2015.12.065 ↗
9. Agency
10. A review of molecular-level mechanism of membrane degradation in the polymer electrolyte fuel cell10.3390/membranes2030395 ↗
11. Nafion degradation mechanisms in proton exchange membrane fuel cell (PEMFC) system: a review10.1016/j.ijhydene.2021.06.032 ↗
12. Chemrous, Commercial cost of Nafion, https://www.nafion.com/en.
13. Hydrogen peroxide formation rates in a PEMFC anode and cathode10.1149/1.2801980 ↗
14. Gas crossover and membrane degradation in polymer electrolyte fuel cells10.1016/j.electacta.2006.03.008 ↗
15. Effect of hydrogen and oxygen partial pressure on Pt precipitation within the membrane of PEMFCs10.1149/1.2764240 ↗
16. Visualizing chemical reactions and crossover processes in a fuel cell inserted in the ESR resonator: detection by spin trapping of oxygen radicals, nafion-derived fragments, and hydrogen and deuterium atoms10.1021/jp901597f ↗
17. Membrane degradation behavior during open-circuit voltage hold test10.1149/1.2741129 ↗
18. Reinforced polyphenylene ionomer membranes exhibiting high fuel cell performance and mechanical durability10.1021/acsmaterialsau.1c00002 ↗
19. Stability of hydrocarbon fuel cell membranes: reaction of hydroxyl radicals with sulfonated phenylated polyphenylenes10.1021/acs.chemmater.8b05302 ↗
20. Fuel cell durability enhancement with cerium oxide under combined chemical and mechanical membrane degradation10.1149/2.0081504eel ↗
21. The degradation mitigation effect of cerium oxide in polymer electrolyte membranes in extended fuel cell durability tests10.1016/j.jpowsour.2012.10.015 ↗
22. Suppression of radical attack in polymer electrolyte membranes using a vinyl polymer blend interlayer with low oxygen permeability10.1016/j.memsci.2022.120734 ↗
23. Nanocellulose processing properties and potential applications
24. High temperature proton conduction in nanocellulose membranes: paper fuel cells10.1021/acs.chemmater.6b01990 ↗
25. A review of proton conductivity in cellulosic materials10.3389/fenrg.2020.596164 ↗
26. Highly proton conductive membranes based on poly(vinylphosphonic acid)-coated cellulose nanocrystals and cellulose nanofibers for polymer electrolyte fuel cells10.1021/acs.energyfuels.3c04336 ↗
27. Spray deposition of sulfonated cellulose nanofibers as electrolyte membranes in fuel cells10.1007/s10570-020-03593-w ↗
28. Cellulose nanocrystals crosslinked with sulfosuccinic acid as sustainable proton exchange membranes for electrochemical energy applications10.3390/membranes12070658 ↗
29. Characterization of a graphene oxide membrane fuel cell10.1016/j.jpowsour.2014.08.071 ↗
30. Alkaline anion exchange membranes based on KOH-treated multilayer graphene oxide10.1016/j.memsci.2016.02.017 ↗
31. Spray-painted graphene oxide membrane fuel cells10.1016/j.memsci.2017.07.012 ↗
32. A fully spray-coated fuel cell membrane electrode assembly using Aquivion ionomer with a graphene oxide/cerium oxide interlayer10.1016/j.jpowsour.2017.03.085 ↗
33. New cross-linked interfacial layer on hydrocarbon membrane to improve long-term stability of polymer electrolyte fuel cells10.1016/j.electacta.2013.01.038 ↗
34. Recent progress in the development of aromatic polymer-based proton exchange membranes for fuel cell applications10.3390/polym12051061 ↗
35. A new insight in determining the percolation threshold of electrical conductivity for extrinsically conducting polymer composites through different sigmoidal models10.3390/polym9100527 ↗
36. Comparing percolation and alignment of cellulose nanocrystals for the reinforcement of polyurethane nanocomposites10.1021/acsami.1c21656 ↗
37. Sustainable preparation of bifunctional cellulose nanocrystals via mixed H2SO4/formic acid hydrolysis10.1016/j.carbpol.2021.118107 ↗
38. Highly efficient preparation of functional and thermostable cellulose nanocrystals via H2SO4 intensified acetic acid hydrolysis10.1016/j.carbpol.2020.116233 ↗
39. Highly proton conductive membranes based on poly(vinylphosphonic acid)-coated cellulose nanocrystals and cellulose nanofibers for polymer electrolyte fuel cells10.1021/acs.energyfuels.3c04336 ↗
40. Crystallinity in cast nafion10.1149/1.1393354 ↗
41. Research on cellulose nanocrystals produced from cellulose sources with various polymorphs10.1039/C7RA06222B ↗
42. Polyvinyl alcohol (PVA)/polystyrene sulfonic acid (PSSA)/carbon black nanocomposite for flexible energy storage device applications10.1007/s10854-016-6287-2 ↗
43. Orientation of drawn nafion at molecular and mesoscopic scales10.1021/ma035642w ↗
44. SAXS analysis of the thermal relaxation of anisotropic morphologies in oriented nafion membranes10.1021/ma052359j ↗
45. Wide-angle X-ray diffraction of cellulose Nanocrystal−Alginate nanocomposite fibers10.1021/ma102731m ↗
46. An improved X-ray diffraction method for cellulose crystallinity measurement10.1016/j.carbpol.2014.12.071 ↗
47. Patience is a virtue: self-assembly and physico-chemical properties of cellulose nanocrystal allomorphs10.1039/D0NR04491A ↗
48. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
49. The effects of hydrogen sulfide on the polymer electrolyte membrane fuel cell anode catalyst: H2S–Pt/C interaction products10.1016/j.jpowsour.2011.04.017 ↗
50. Properties of PEMs based on cross-linked sulfonated poly(ether ether ketone)10.1016/j.memsci.2006.08.036 ↗
51. Review of hydrogels and aerogels containing nanocellulose10.1021/acs.chemmater.7b00531 ↗
52. Recent progress in cellulose nanocrystals: sources and production10.1039/C6NR09494E ↗
53. Benchmarking cellulose nanocrystals: from the laboratory to industrial production10.1021/acs.langmuir.6b03765 ↗
54. Perfluorinated composite membranes with organic antioxidants for chemically durable fuel cells10.1016/j.electacta.2018.12.150 ↗
55. Chemical durability of thin pore-filling membrane in open-circuit voltage hold test10.1016/j.ijhydene.2019.09.143 ↗