Distribution of relaxation times-based analysis of aging mechanisms and prediction of heating domain for alternating current pulse self-heating lithium-ion batteries
Source abstract
Abstract
Lithium-ion batteries (LIBs)-based electric vehicles (EVs) often encounter challenges such as the reduction in endurance mileage and the increase in charging time at low temperatures. To address these issues, the alternating current (AC) pulse self-heating in LIBs emerges as a pivotal method to overcome performance limitations of EVs at low temperatures. However, employing AC pulsing with high amplitude and low frequency can potentially lead to battery degradation. In this study, the state transitions and aging causes of LIBs during the self-heating are meticulously examined using the distribution of relaxation times (DRT) method. The results reveal that at an AC frequency of 50 Hz or higher, even with amplitudes up to 12 C, there is no degradation for the battery used in this study. For aged LIBs, the significant rise in impedance of solid electrolyte interphase (SEI) due to lithium plating, is the main factor driving battery aging during AC self-heating. Subsequently, an electrochemical-thermal coupling (ETC) model grounded in the degradation mechanism has been developed and experimentally validated to accurately predict the optimal heating domain for self-heating. This approach holds significant implications for the rapid selection of self-heating parameters for facilitating efficient battery performance enhancement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A review of nonaqueous electrolytes, binders, and separators for lithium-ion batteries10.1007/s41918-022-00131-z ↗
2. Reevaluating flexible lithium-ion batteries from the insights of mechanics and electrochemistry10.1007/s41918-022-00150-w ↗
3. Building better full manganese-based cathode materials for next-generation lithium-ion batteries10.1007/s41918-023-00184-8 ↗
4. Perspectives and challenges for future lithium-ion battery control and management10.1016/j.etran.2023.100260 ↗
5. Challenges and development of lithium-ion batteries for low temperature environments10.1016/j.etran.2021.100145 ↗
6. Thermal runaway behaviors of Li-ion batteries after low temperature aging: experimental study and predictive modeling10.1016/j.est.2023.107451 ↗
7. Low-temperature performance of Li-ion batteries: the behavior of lithiated graphite10.1016/j.jpowsour.2015.02.008 ↗
8. Modeling the inhomogeneous lithium plating in lithium-ion batteries induced by non-uniform temperature distribution10.1016/j.electacta.2022.140701 ↗
9. Improving battery safety by utilizing composite phase change material to delay the occurrence of thermal runaway event10.1016/j.icheatmasstransfer.2024.107527 ↗
10. Pu J, Ping XF, Panchal S, et al. Structural optimization of a serpentine-channel cold plate for thermal management of lithium-ion battery based on the field synergy principle. Available at SSRN 2024;4795285. https://doi.org/10.2139/ssrn.4795285..10.2139/ssrn.4928730 ↗
11. Heat transfer and fluid flow in a PCM-filled enclosure: effect of heated wall configuration10.1016/j.est.2024.111448 ↗
12. Parametric investigation of battery thermal management system with phase change material, metal foam, and fins; utilizing CFD and ANN models
13. A comparative study of thermal runaway of commercial lithium ion cells10.1016/j.energy.2018.06.173 ↗
14. Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes10.1016/j.energy.2016.07.076 ↗
15. A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles10.1016/j.rser.2016.05.033 ↗
16. Lithium-ion battery structure that self-heats at low temperatures10.1038/nature16502 ↗
17. Lithium-ion batteries modeling and optimization strategies for sinusoidal alternating current heating at low temperature10.1016/j.egypro.2018.09.211 ↗
18. Experimental study on pulse self–heating of lithium–ion battery at low temperature10.1016/j.ijheatmasstransfer.2019.02.020 ↗
19. Experimental investigations of an AC pulse heating method for vehicular high power lithium-ion batteries at subzero temperatures10.1016/j.jpowsour.2017.09.063 ↗
20. The heating triangle: a quantitative review of self-heating methods for lithium-ion batteries at low temperatures10.1016/j.jpowsour.2023.233484 ↗
21. Internal heating of lithium-ion batteries using alternating current based on the heat generation model in frequency domain10.1016/j.jpowsour.2014.09.181 ↗
22. Experimental investigations of an ac pulse heating method for vehicular high power lithium-ion batteries at subzero temperatures10.1016/j.jpowsour.2017.09.063 ↗
23. A review of modeling, acquisition, and application of lithium-ion battery impedance for onboard battery management10.1016/j.etran.2020.100093 ↗
24. Proton exchange membrane fuel cell (PEMFC) operation in high current density (HCD): problem, progress and perspective10.1016/j.enconman.2024.118348 ↗
25. Deep learning-based fault diagnosis and electrochemical impedance spectroscopy frequency selection method for proton exchange membrane fuel cell10.1016/j.jpowsour.2023.233815 ↗
26. Decouple charge transfer reactions in the Li-ion battery10.1016/j.jechem.2024.02.003 ↗
27. The timescale identification decoupling complicated kinetic processes in lithium batteries10.1016/j.joule.2022.05.005 ↗
28. The importance of interphase contacts in Li ion electrodes: the meaning of the high-frequency impedance arc10.1149/1.2964220 ↗
29. Investigation of the solid electrolyte interphase formation at graphite anodes in lithium-ion batteries with electrochemical impedance spectroscopy10.1016/j.electacta.2017.01.128 ↗
30. Diagnosing the SEI layer in a potassium ion battery using distribution of relaxation time10.1021/acs.jpclett.1c00118 ↗
31. Nano-ordered structure regulation in delithiated Si anode triggered by homogeneous and stable Li-ion diffusion at the interface10.1016/j.nanoen.2020.104651 ↗
32. High-efficient prediction of state of health for lithium-ion battery based on AC impedance feature tuned with Gaussian process regression10.1016/j.jpowsour.2023.232737 ↗
33. Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
34. Modeling of lithium plating induced aging of lithium-ion batteries: transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
35. Ultrafast charging of energy-dense lithium-ion batteries for urban air mobility10.1016/j.etran.2021.100103 ↗
36. Sinusoidal alternating current heating strategy and optimization of lithium-ion batteries with a thermo-electric coupled model10.1016/j.energy.2019.07.128 ↗
37. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
38. Degradation mechanism analysis and State-of-Health estimation for lithium-ion batteries based on distribution of relaxation times
39. Comparative analysis for commercial li-ion batteries degradation using the distribution of relaxation time method based on electrochemical impedance spectroscopy10.1016/j.energy.2022.125972 ↗
40. Impedance characterization of lithium-ion batteries aging under high-temperature cycling: importance of electrolyte-phase diffusion10.1016/j.jpowsour.2019.04.040 ↗
41. An easy-to-implement multi-point impedance technique for monitoring aging of lithium ion batteries10.1016/j.jpowsour.2018.11.087 ↗
42. Investigation of physico-chemical processes in lithium-ion batteries by deconvolution of electrochemical impedance spectra10.1016/j.jpowsour.2017.07.006 ↗
43. In-situ quantitative detection of irreversible lithium plating within full-lifespan of lithium-ion batteries10.1016/j.jpowsour.2023.232892 ↗
44. Low-temperature charging of lithium-ion cells part I: electrochemical modeling and experimental investigation of degradation behavior10.1016/j.jpowsour.2013.12.022 ↗
45. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
46. Detecting onset of lithium plating during fast charging of Li-ion batteries using operando electrochemical impedance spectroscopy
47. Mathematical modeling of the lithium deposition overcharge reaction in lithium-ion batteries using carbon-based negative electrodes10.1149/1.1392512 ↗
48. Electrochemical model of lithium-ion battery for wide frequency range applications10.1016/j.electacta.2020.136094 ↗