Optimizing efficiency of proton exchange membrane electrolyzer system based on multiphysics model and differential evolution strategy
Source abstract
Abstract
This work focuses on a comprehensive performance enhancement considering hydrogen production, energy consumption of balance of plant (BOP), and thermal safety by optimizing the inlet water temperature and flow velocity. First, a multiphysics model is introduced to show that the inlet water temperature and flow velocity can affect the current density as well as the hydrogen production. An overall efficiency is defined to balance the hydrogen production and the energy consumption of BOP. After that, a surrogate model is established based on artificial neural network to replace the multiphysics model because of its huge computational effort. For the thermal safety and performance enhancement, an optimization problem with the maximum membrane temperature as a constraint and the overall efficiency as an objective function is proposed. The differential evolution (DE) strategy with the feasibility rule (FR) is adopted to solve this optimization problem. Finally, the DE-FR-based optimization algorithm is applied to three typical days in Chengdu of China representing summer, winter, and transitional seasons, respectively. Compared to the invariant inlet water flow velocity and temperature, the optimal and time-varying parameters improve their efficiency by relative percentages of 2.68%, 3.79%, and 3.29% for the three typical days, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Advanced Battery Technologies Research · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Review and evaluation of hydrogen production methods for better sustainability10.1016/j.ijhydene.2014.12.035 ↗
2. Hydrogen production from renewable and sustainable energy resources: Promising green energy carrier for clean development10.1016/j.rser.2015.12.112 ↗
3. Hydrogen: A brief overview on its sources, production and environmental impact10.1016/j.ijhydene.2018.02.022 ↗
4. Performance of a PEM water electrolysis cell using IrxRuyTazO2 electrocatalysts for the oxygen evolution electrode10.1016/j.ijhydene.2007.02.013 ↗
5. Temperature optimization for improving polymer electrolyte membrane-water electrolysis system efficiency10.1016/j.apenergy.2020.116270 ↗
6. Low-temperature electrolysis system modelling: A review10.1016/j.rser.2017.03.099 ↗
7. Mathematical modeling and dynamic Simulink simulation of high-pressure PEM electrolyzer system10.1016/j.ijhydene.2016.06.022 ↗
8. Dynamic simulation of PEM water electrolysis and comparison with experiments10.1016/S1452-3981(23)14016-8 ↗
9. Analysis of the parametric effect on the performance of a polymer electrolyte membrane electrolyzer
10. Influence of the operation mode on PEM water electrolysis degradation10.1016/j.ijhydene.2019.09.169 ↗
11. Status and perspectives of key materials for PEM electrolyzer10.26599/NRE.2022.9120032 ↗
12. A parametric study of polymer membrane electrolyser performance, energy and exergy analyses10.1016/j.ijhydene.2018.11.081 ↗
13. Pressurized PEM water electrolysis: Efficiency and gas crossover10.1016/j.ijhydene.2013.09.013 ↗
14. The efficient and economic design of PEM fuel cell systems by multi-objective optimization10.1016/j.jpowsour.2007.01.022 ↗
15. A multi-objective optimisation model for a general polymer electrolyte membrane fuel cell system10.1016/j.jpowsour.2009.10.095 ↗
16. Multi-objective optimization of operating conditions and channel structure for a proton exchange membrane fuel cell10.1016/j.ijheatmasstransfer.2017.03.120 ↗
17. Towards online optimisation of solid oxide fuel cell performance: Combining deep learning with multi-physics simulation10.1016/j.egyai.2020.100003 ↗
18. Optimizing the homogeneity and efficiency of a solid oxide electrolysis cell based on multiphysics simulation and data-driven surrogate model10.1016/j.jpowsour.2023.232760 ↗
19. Parametric optimization and control for a smart Proton Exchange Membrane Water Electrolysis (PEMWE) system10.1016/j.jprocont.2020.05.002 ↗
20. Multi-objective optimizations of solid oxide co-electrolysis with intermittent renewable power supply via multi-physics simulation and deep learning strategy10.1016/j.enconman.2022.115560 ↗
21. Energy and exergy analysis of hydrogen production by a proton exchange membrane (PEM) electrolyzer plant10.1016/j.enconman.2008.03.018 ↗
22. Efficiency calculation and configuration design of a PEM electrolyzer system for hydrogen production10.1016/S1452-3981(23)19527-7 ↗
23. Spatially resolved electrochemical performance and temperature distribution of a segmented solid oxide fuel cell under various hydrogen dilution ratios and electrical loadings10.1016/j.jpowsour.2022.231477 ↗
24. Reliability of the numerical SOFC models for estimating the spatial current and temperature variations10.1016/j.ijhydene.2016.06.194 ↗
25. High spatial resolution temperature profile measurements of solid-oxide fuel cells10.1016/j.apenergy.2021.116633 ↗
26. Investigation of PEM electrolyzer modeling: Electrical domain, efficiency, and specific energy consumption10.1016/j.ijhydene.2020.03.195 ↗
27. Utilization of waste heat from GTMHR for hydrogen generation via combination of organic Rankine cycles and PEM electrolysis10.1016/j.enconman.2016.09.043 ↗
28. Hydrogen production using the waste heat of Benchmark pressurized Molten carbonate fuel cell system via combination of organic Rankine cycle and proton exchange membrane (PEM) electrolysis10.1016/j.applthermaleng.2016.12.018 ↗
29. One-dimensional dynamic modeling of a high-pressure water electrolysis system for hydrogen production10.1016/j.ijhydene.2012.12.006 ↗
30. Two-dimensional model of low-pressure PEM electrolyser: Two-phase flow regime, electrochemical modelling and experimental validation10.1016/j.ijhydene.2017.08.211 ↗
31. Numerical investigation of PEM water electrolysis performance for different oxygen evolution electrocatalysts10.1002/fuce.201600216 ↗
32. Simulation and experiment of heat and mass transfer in a proton exchange membrane electrolysis cell10.1016/j.ijhydene.2020.02.102 ↗
33. Systematic assessment of the anode flow field hydrodynamics in a new circular PEM water electrolyser10.1016/j.ijhydene.2020.05.164 ↗
34. Artificial neural network simulator for SOFC performance prediction10.1016/S0378-7753(02)00314-2 ↗
35. AI-based optimization of PEM fuel cell catalyst layers for maximum power density via data-driven surrogate modeling10.1016/j.enconman.2019.112460 ↗
36. A robust surrogate model of a solid oxide cell based on an adaptive polynomial approximation method10.1016/j.ijhydene.2020.09.116 ↗
37. A review of recent development: Transport and performance modeling of PEM fuel cells10.1016/j.apenergy.2015.12.075 ↗
38. Quantitative analysis of trapezoid baffle block sloping angles on oxygen transport and performance of proton exchange membrane fuel cell10.1016/j.apenergy.2020.115257 ↗
39. Two-phase mass transport model for microfluidic fuel cell with narrow electrolyte flow channel10.1016/j.apenergy.2022.119456 ↗
40. Numerical investigation of the coupled water and thermal management in PEM fuel cell10.1016/j.apenergy.2013.02.031 ↗
41. Numerical investigation of water and temperature distributions in a proton exchange membrane electrolysis cell10.1007/s11431-021-1810-9 ↗
42. Modeling of two-phase transport in the diffusion media of polymer electrolyte fuel cells10.1016/j.jpowsour.2008.07.007 ↗
43. Multi-objective optimization of PEM fuel cell by coupled significant variables recognition, surrogate models and a multi-objective genetic algorithm10.1016/j.enconman.2021.114063 ↗
44. Influencing sensitivities of critical operating parameters on PEMFC output performance and gas distribution quality under different electrical load conditions10.1016/j.apenergy.2019.113849 ↗
45. Thermal and electrochemical performance assessment of a high temperature PEM electrolyzer10.1016/j.energy.2018.03.140 ↗
46. Optimal coordinated planning of water-energy system-based MILP algorithm of a multi-pump PV water station by deeming power commitment10.1016/j.epsr.2023.109343 ↗
47. A novel high coefficient of performance electrochemical cooling system developed based on the combined chlorine/bromine-hydrogen fuel cell and electrolyzer10.1016/j.jpowsour.2023.232716 ↗
48. SOC estimation for lithium-ion battery using the LSTM-RNN with extended input and constrained output10.1016/j.energy.2022.125375 ↗
49. State of charge estimation for Li-ion batteries using neural network modeling and unscented Kalman filter-based error cancellation10.1016/j.ijepes.2014.04.059 ↗
50. PSO-GA based hybrid with Adam Optimization for ANN training with application in Medical Diagnosis10.1016/j.cogsys.2020.08.011 ↗
51. State of charge estimation for lithium-ion batteries using gated recurrent unit recurrent neural network and adaptive Kalman filter10.1016/j.est.2022.105396 ↗
52. Price · 2005
53. Two-phase flow behaviour and performance of polymer electrolyte membrane electrolysers: Electrochemical and optical characterisation10.1016/j.ijhydene.2018.07.003 ↗
54. Comprehensive evaluation of the influence of PEM water electrolyzers structure on mass transfer performance based on entropy weight method10.1016/j.ijheatmasstransfer.2024.125839 ↗
55. Optimal design of a grid-connected desalination plant powered by renewable energy resources using a hybrid PSO–GWO approach10.1016/j.enconman.2018.07.083 ↗