journal article·2024-09Open access

In situ steam oxidation of nickel phosphide/carbon composite nanofibers as anode materials for lithium-ion batteries

Gulderaiym Turarova, Izumi Taniguchi, Zhumabay Bakenov, Ayaulym Belgibayeva

Abstract

The synthesis of self-standing nickel phosphide/carbon (NixP/C) composite nanofibers is accomplished through a one-pot electrospinning and in situ steam oxidation after the carbothermal reduction process. Control over the levels of in situ steam oxidizers in the forms of crystal water and nitrates in the precursor fibers is achieved by systematically adjusting the drying temperature before the high-temperature heat treatment. This led to structural modifications in the final products analyzed through comprehensive characterizations. Mechanistic insights into the in situ steam oxidation process are provided, emphasizing its potential in optimizing electrode materials. Electrochemical assessments reveal significantly improved performance in the sample prepared from the media with optimal content of oxidizers, attributed to a tailored surface oxide layer, electronic configuration, and microstructure, enabling enhanced reaction kinetics and minimizing volume expansion. This results in exceptional cycling stability and notable capacity retention during prolonged charge-discharge cycles. Thus, NixP/C achieves the highest initial charge capacity of 719.5 mAh g−1 with an initial Coulombic efficiency of 61% and maintains a high capacity of 590.7 mAh g−1 after 100 cycles at a current density of 0.1 A g−1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Controlled synthesis of highly active nonstoichiometric tin phosphide/carbon composites for electrocatalysis and electrochemical energy storage applications10.1021/acssuschemeng.1c06699 ↗
2. Nanostructured metal phosphide-based materials for electrochemical energy storage10.1039/C6TA06705K ↗
3. Recent advances in nanostructured metal phosphides as promising anode materials for rechargeable batteries10.1039/D0TA06533A ↗
4. Direct nonoxidative conversion of methane to higher hydrocarbons over silica-supported nickel phosphide catalyst10.1021/acscatal.9b03955 ↗
5. Nanostructured metal phosphide-based materials for electrochemical energy storage10.1039/C6TA06705K ↗
6. Progress and perspective of metal phosphide/carbon heterostructure anodes for rechargeable ion batteries10.1039/D1TA01626A ↗
7. Synthesis of free‐standing tin phosphide/phosphate carbon composite nanofibers as anodes for lithium‐ion batteries with improved low‐temperature performance
8. Phase-selective synthesis of nickel phosphide in high-boiling solvent for all-solid-state lithium secondary batteries10.1021/ic2013733 ↗
9. Fabrication of highly ordered porous nickel phosphide film and its electrochemical performances toward lithium storage10.1016/j.jallcom.2010.09.013 ↗
10. Synthetic levers enabling independent control of phase, size, and morphology in nickel phosphide nanoparticles10.1021/nn1033357 ↗
11. General strategy for controlled synthesis of NixPy/carbon and its evaluation as a counter electrode material in dye-sensitized solar cells10.1021/acsami.7b03541 ↗
12. Reflux-based synthesis and electrocatalytic characteristics of nickel phosphate nanoparticles10.1016/j.jpowsour.2016.09.079 ↗
13. Determination of kinetic triplet of the synthesized Ni3(PO4)2·8H2O by non-isothermal and isothermal kinetic methods10.1007/s10973-013-3399-2 ↗
14. Nickel and nickel phosphide nanoparticles embedded in electrospun carbon fibers as favourable electrocatalysts for hydrogen evolution10.1016/j.cej.2016.05.147 ↗
15. A review on electrospun polyvinylpyrrolidone-derived carbon composite nanofibers as advanced functional materials for energy storage applications and beyond10.1039/D3TA01198D ↗
16. Free-standing SnSe@C nanofiber anode material for low-temperature lithium-ion batteries10.1016/j.powera.2023.100128 ↗
17. Preparing a graphene/carbon nanotube coated hollow nickel phosphides microsphere anode with high stability for high-performance lithium/sodium battery10.1016/j.jelechem.2023.117479 ↗
18. Rationally designed Ni2P/C composite membrane with enhanced electrochemical reversibility and stability for lithium-ion storage10.1016/j.jpowsour.2023.233300 ↗
19. Porous Si nanowires from cheap metallurgical silicon stabilized by a surface oxide layer for lithium ion batteries10.1002/adfm.201503206 ↗
20. Novel size and surface oxide effects in silicon nanowires as lithium battery anodes10.1021/nl202630n ↗
21. Surface chemistry in cobalt phosphide-stabilized lithium–sulfur batteries10.1021/jacs.7b11434 ↗
22. Highly efficient peroxymonosulfate activation by surface oxidized nickel phosphide with dual active sites10.1021/acs.iecr.0c04797 ↗
23. Evolution of Cr/Cr2O3 interface in Cr-coated zirconium alloy in high temperature steam10.1016/j.corsci.2023.111099 ↗
24. Synthesis and characterization of porous-crystalline C/Fe3O4 microspheres by spray pyrolysis with steam oxidation as anode materials for Li-ion batteries10.1016/j.apt.2022.103606 ↗
25. C-C coupling of carbene molecules on a metal surface in the presence of water
26. Thermal decomposition of metal nitrates in air and hydrogen environments10.1021/jp026961c ↗
27. Effect of spray pyrolysis temperature on physical and electrochemical properties of LiCoPO4/C nanocomposites10.1016/j.powtec.2011.11.024 ↗
28. Perry · 2016
29. Microwave-assisted polyol process for synthesis of Ni nanoparticles10.1111/j.1551-2916.2006.00925.x ↗
30. Studies on synergetic effect of rGO-NiCo2S4 nanocomposite as an effective counter electrode material for DSSC10.1016/j.ceramint.2017.05.042 ↗
31. Polyvinylpyrrolidone (PVP) in nanoparticle synthesis10.1039/C5DT02964C ↗
32. Photo-crosslinked lignin/PAN electrospun separator for safe lithium-ion batteries10.1038/s41598-022-23038-7 ↗
33. Thermal shrinkage of electrospun PVP nanofibers10.1002/polb.24538 ↗
34. Effects of electrospinning parameters on the microstructure of PVP/TiO2 nanofibers10.3390/nano11061616 ↗
35. Lithiophilic nickel phosphide modifying carbon nanofibers for a highly reversible lithium-metal anode10.1021/acsaem.2c00148 ↗
36. Construction of carbon-coated nickel phosphide nanoparticle assembled submicrospheres with enhanced electrochemical properties for lithium/sodium-ion batteries10.1016/j.jcis.2018.11.093 ↗
37. An efficient method for the synthesis of nickel phosphide nanocrystals via thermal decomposition of single-source precursors10.1039/C5RA00117J ↗
38. Ternary CoPSe in-situ grown in cubic hollow carbon nanobox achieves high-rate and long-life lithium/sodium storage10.1016/j.materresbull.2023.112437 ↗
39. Sulfur-doped 3D hierarchical porous carbon network toward excellent potassium-ion storage performance10.1007/s12598-021-01715-2 ↗
40. High-entropy chemistry stabilizing spinel oxide (CoNiZnXMnLi)3O4 (X = Fe, Cr) for high-performance anode of Li-ion batteries10.1007/s12598-021-01872-4 ↗
41. Metal-organic framework-derived ultrafine CoSe nanocrystal@honeycomb porous carbon nanofiber as multidimensional advanced anode for sodium-ion batteries10.1016/j.apsusc.2023.157886 ↗
42. Ni2P/graphitic carbon nanostructure electrode with superior electrochemical performance10.1016/j.electacta.2020.136045 ↗
43. Sandwich-like Ni2P nanoarray/nitrogen-doped graphene nanoarchitecture as a high-performance anode for sodium and lithium ion batteries10.1016/j.ensm.2018.04.011 ↗
44. Tailored Ni2P nanoparticles supported on N-doped carbon as a superior anode material for Li-ion batteries10.1039/C9QI00480G ↗
45. Yolk-shelled Ni2P@carbon nanocomposite as high-performance anode material for lithium and sodium ion batteries10.1016/j.apsusc.2018.12.225 ↗