journal article·2024-05

Al & Ti Synergy enhancing ionic diffusion and stabilizing lattice oxygen for the high voltage single crystal Ni-rich layered oxide cathode materials

Lijuan Hou, Qi Liu, Xinyuan Chen, Qiang Yang, Fengling Zhang, Daobin Mu, Li Li, Feng Wu, Renjie Chen

Publisher page

Abstract

Single crystal Ni-rich layered oxide cathode materials enjoy better stability compared to polycrystalline materials, exhibiting good prospects in high energy density lithium-ion batteries. However, the poorer structure stability and rate performance are faced for the future large-scale application of single crystal Ni-rich layered oxide cathode material. The synergistic effect of Al and Ti is studied by in-situ differential electrochemical mass spectrometry (DEMS) and in-situ X-ray diffraction (XRD) combination with density functional theory (DFT) calculations to reveal the phase stabilization mechanism, improving the cycling stability of high voltage Ni-rich single crystal Li(Ni 0 · 83Co 0 · 12Mn 0.05)O 2 cathode material. It is indicated that bonding energy between the transition metal and oxygen atoms in the layered oxide are increased by introduction of Al and Ti elements, enhancing the stability of lattice oxygen and increasing the diffusion rate of Li +. The Al 3+ can inhibit cation mixing, while Ti 4+ can optimize the layered structure, which reduces structural failure caused by reaction heterogeneity, enhancing the cycling and rate performance of the cathode material in 4.5 V high voltage. The outstanding stably 500 cycles are obtained with capacity retention rate of 71.8%, compared to the unmodified sample with only 35.1% capacity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
2. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
3. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
4. Unraveling the structural instability of Li(Ni0.80Co0.15Al0.05)O2 as a cathode material due to operating a Li-ion battery10.1002/smll.202200581 ↗
5. A. Manthiram Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries
6. A review on the stability and surface modification of layered transition-metal oxide cathodes10.1016/j.mattod.2020.12.017 ↗
7. Layered ternary metal oxides: performance degradation mechanisms as cathodes, and design strategies for high-performance batteries10.1016/j.pmatsci.2020.100655 ↗
8. Advances and prospects of high-voltage spinel cathodes for lithium-based batteries10.1002/smtd.202001196 ↗
9. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode10.1126/science.abc3167 ↗
10. Radially oriented single-crystal primary nanosheets enable ultrahigh rate and cycling properties of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries
11. X. Xu surface/interfacial structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
12. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for Li-ion batteries10.1002/aenm.201801202 ↗
13. Mitigating the kinetic hindrance of single-crystalline Ni-rich cathode via surface gradient penetration of tantalum10.1002/anie.202111954 ↗
14. Restoration of degraded nickel-rich cathode materials for long-life lithium-ion batteries10.1002/celc.201700979 ↗
15. Fictitious phase separation in Li layered oxides driven by electro-autocatalysis10.1038/s41563-021-00936-1 ↗
16. Investigation of structure and cycling performance of Nb-doped nickel-rich single-crystal ternary cathode materials10.1007/s11581-021-04293-6 ↗
17. Stabilizing surface chemistry and texture of single-crystal Ni-rich cathodes for Li-ion batteries10.1016/j.jmst.2022.01.037 ↗
18. Evolution effect of Ti-based modifiers awards improved lithium ion diffusion rate of single crystal nickel-rich cathode10.1016/j.jssc.2021.122796 ↗
19. Promoting grain growth in Ni-rich single-crystal cathodes for high-performance lithium-ion batteries through Ce doping10.1007/s10008-022-05212-z ↗
20. Al-doping enables high stability of single-crystalline LiNi0.7Co0.1Mn0.2O2 lithium-ion cathodes at high voltage10.1039/D0RA09813B ↗
21. The effect of gradient boracic polyanion-doping on structure, morphology, and cycling performance of Ni-rich LiNi0.8Co0.15Al0.05O2 cathode material10.1016/j.jpowsour.2017.11.020 ↗
22. Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy10.1038/s41467-022-30020-4 ↗
23. A new insight into the capacity decay mechanism of Ni-rich layered oxide cathode for lithium-ion batteries10.1002/smll.202204613 ↗
24. Unraveling the nonlinear capacity fading mechanisms of Ni-rich layered oxide cathode10.1016/j.ensm.2022.12.009 ↗
25. Frisch · 2010
26. X. Yu Hierarchical defect engineering for LiCoO2 through low-solubility trace element doping10.1016/j.chempr.2020.07.017 ↗
27. Extending the battery life using an Al-doped LiNi0. 76Co0. 09Mn0. 15O2 cathode with concentration gradients for lithium ion batteries10.1021/acsenergylett.7b00613 ↗
28. Al-doping enables high stability of single-crystalline LiNi0.7Co0.1Mn0.2O2 lithium-ion cathodes at high voltage10.1039/D0RA09813B ↗
29. Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material10.1016/j.electacta.2019.135086 ↗
30. Long-lasting Ni-rich NCMA cathodes via simultaneous microstructural refinement and surface modification10.1021/acsenergylett.3c00083 ↗
31. Investigation the sodium storage kinetics of H1.07Ti1.73O4@rGO composites for high rate and long cycle performance10.1111/jace.17575 ↗
32. S. Passerini MnPO4-coated Li-NCM: MnPO4-coated Li(Ni0.4Co0.2Mn0.4)O2 for lithium(-ion) batteries with outstanding cycling stability and enhanced lithiation kinetics
33. Co/Li-dual-site doping towards LiCoO2 as a high-voltage, fast-charging, and long-cycling cathode material10.1039/D1TA10612K ↗
34. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: a review10.1016/j.jpowsour.2020.228742 ↗
35. Chemical-mechanical robustness of single-crystalline Ni-rich cathode enabled by surface atomic arrangement control10.1002/anie.202302170 ↗
36. In-depth understanding of the deterioration mechanism and modification engineering of high energy density Ni-rich layered lithium transition-metal oxide cathode for lithium-ion batteries10.1016/j.cej.2023.142946 ↗
37. Enhancement of structural, electrochemical, and thermal properties of high-energy density Ni-rich LiNi0.85Co0.1Mn0.05O2 cathode materials for Li-ion batteries by niobium doping10.1021/acsami.1c06839 ↗
38. Operando monitoring of early Ni-mediated surface reconstruction in layered lithiated Ni–Co–Mn oxides10.1021/acs.jpcc.7b02303 ↗
39. Singlet oxygen evolution from layered transition metal oxide cathode materials and its implications for lithium-ion batteries10.1016/j.mattod.2018.03.037 ↗