journal article·2024-01

Unlocking the porosity of Fe–N–C catalysts using hydroxyapatite as a hard template en route to eco-friendly high-performance AEMFCs

Patrick Teppor, Rutha Jäger, Miriam Koppel, Olga Volobujeva, Rasmus Palm, Martin Månsson, Eneli Härk, Zdravko Kochovski, Jaan Aruväli, Kuno Kooser, Sari Granroth, Tanel Käämbre, Jaak Nerut, Enn Lust

Publisher page

Abstract

In this work, we propose hydroxyapatite (HA) as a hard template to unlock the porosity of Fe–N–C catalyst materials. Using HA, a naturally occurring mineral that can be removed with nitric acid, in the synthesis generates a catalyst material with a unique porous network comprising abundant pores and interparticle cavities ranging from 10 to 3000 nm. Hard templating with HA alongside ZnCl 2 as a micropore former results in a Fe–N–C catalyst based on naturally abundant peat with excellent oxygen reduction activity in alkaline conditions. A half-wave potential of 0.87 V vs RHE and a peak power density of 1.06 W cm −2 were achieved in rotating ring disk electrode and anion exchange membrane fuel cell experiments, respectively, rivaling the performance of other state-of-the-art platinum-free catalysts presented in the literature. A combined approach of using renewable peat as a carbon source and HA as a hard template offers an environmentally friendly approach to high-performance Fe–N–C catalysts with abundant porosity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
2. Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments10.1039/D0CS01079K ↗
3. The role of renewable fuel supply in the transport sector in a future decarbonized energy system10.1016/j.ijhydene.2018.10.110 ↗
4. Direct hydrogen fuel cell electric vehicle cost analysis: system and high-volume manufacturing description, validation, and outlook10.1016/j.jpowsour.2018.07.100 ↗
5. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
6. US Department of Energy hydrogen and fuel cell technologies perspectives10.1557/mrs.2019.312 ↗
7. Status and challenges for the application of platinum group metal-free catalysts in proton-exchange membrane fuel cells
8. Iron-nitrogen-carbon catalysts for proton exchange membrane fuel cells10.1016/j.joule.2019.12.002 ↗
9. Anion exchange membrane fuel cells: current status and remaining challenges10.1016/j.jpowsour.2017.08.010 ↗
10. Materials, technological status, and fundamentals of PEM fuel cells – a review10.1016/j.mattod.2019.06.005 ↗
11. A review of the stability and durability of non-precious metal catalysts for the oxygen reduction reaction in proton exchange membrane fuel cells10.1016/j.jpowsour.2015.03.047 ↗
12. Fundamental mechanistic understanding of electrocatalysis of oxygen reduction on Pt and non-Pt surfaces: acid versus alkaline media10.1155/2012/491604 ↗
13. pH effect on the H2O2-induced deactivation of Fe-N-C catalysts10.1021/acscatal.0c00948 ↗
14. A bimetallic alloy anchored on biomass-derived porous N-doped carbon fibers as a self-supporting bifunctional oxygen electrocatalyst for flexible Zn–air batteries10.1039/D0TA03288C ↗
15. Nitrogen and phosphorus co-doped hierarchically porous carbons derived from cattle bones as efficient metal-free electrocatalysts for the oxygen reduction reaction10.1039/C7TA07746G ↗
16. Low-cost chitosan-derived N-doped carbons boost electrocatalytic activity of multiwall carbon nanotubes10.1002/adfm.201707284 ↗
17. Iron, nitrogen Co-doped carbon spheres as low cost, scalable electrocatalysts for the oxygen reduction reaction10.1002/adfm.202102974 ↗
18. Refining estimates of global peatland distribution based on a meta-analysis10.1016/j.catena.2017.09.010 ↗
19. The status, conservation and sustainable use of Estonian wetlands10.1007/s11273-008-9129-z ↗
20. Sustainable use of Estonian peat reserves and environmental challenges10.3176/earth.2008.2.04 ↗
21. Peat-derived carbon-based non-platinum group metal type catalyst for oxygen reduction and evolution reactions10.1016/j.elecom.2020.106700 ↗
22. Synthesis and characterization of cobalt and nitrogen Co-doped peat-derived carbon catalysts for oxygen reduction in acidic media10.3390/catal11060715 ↗
23. Peat as a carbon source for non-platinum group metal oxygen electrocatalysts and AEMFC cathodes10.1016/j.ijhydene.2022.03.199 ↗
24. Hydrothermal and peat-derived carbons as electrode materials for high-efficient electrical double-layer capacitors10.1007/s10800-019-01364-5 ↗
25. Peat-derived hard carbon electrodes with superior capacity for sodium-ion batteries10.1039/D0RA03212C ↗
26. Critical advancements in achieving high power and stable nonprecious metal catalyst–based MEAs for real-world proton exchange membrane fuel cell applications10.1126/sciadv.aar7180 ↗
27. Cross-laboratory experimental study of non-noble-metal electrocatalysts for the oxygen reduction reaction10.1021/am900219g ↗
28. Integration of morphology and electronic structure modulation on atomic iron-nitrogen-carbon catalysts for highly efficient oxygen reduction10.1002/adfm.202108345 ↗
29. Hierarchically porous Co−N−C cathode catalyst layers for anion exchange membrane fuel cells10.1002/cssc.201901668 ↗
30. The control and effect of pore size distribution in AEMFC catalyst layers10.1149/2.0421605jes ↗
31. Understanding the interplay between cathode catalyst layer porosity and thickness on transport limitations en route to high-performance PEMFCs10.1016/j.ijhydene.2019.04.194 ↗
32. Fe–N–C electrocatalyst with dense active sites and efficient mass transport for high-performance proton exchange membrane fuel cells10.1038/s41929-019-0237-3 ↗
33. Fe-N-C oxygen reduction fuel cell catalyst derived from carbendazim: synthesis, structure, and reactivity10.1002/aenm.201301735 ↗
34. Catalysts by pyrolysis: direct observation of chemical and morphological transformations leading to transition metal-nitrogen-carbon materials10.1016/j.mattod.2021.02.006 ↗
35. Active salt/silica-templated 2D mesoporous FeCo-Nx-Carbon as bifunctional oxygen electrodes for zinc–air batteries10.1002/anie.201710852 ↗
36. Performance of a Fe-N-C catalyst for the oxygen reduction reaction in direct methanol fuel cell: cathode formulation optimization and short-term durability10.1016/j.apcatb.2016.08.043 ↗
37. Efficient Pt-free electrocatalyst for oxygen reduction reaction: highly ordered mesoporous N and S co-doped carbon with saccharin as single-source molecular precursor10.1016/j.apcatb.2016.04.056 ↗
38. A review of the control of pore structure in MgO-templated nanoporous carbons10.1016/j.carbon.2010.03.064 ↗
39. Hard-template synthesis of three-dimensional interconnected carbon networks: rational design, hybridization and energy-related applications10.1016/j.nantod.2019.100796 ↗
40. Templated nitrogen-, iron-, and cobalt-doped mesoporous nanocarbon derived from an alkylresorcinol mixture for anion-exchange membrane fuel cell application10.1021/acscatal.2c03683 ↗
41. Nitrogen-doped carbon–CoOx nanohybrids: a precious metal free cathode that exceeds 1.0 W cm−2 peak power and 100 h life in anion-exchange membrane fuel cells10.1002/ange.201811099 ↗
42. Correlations between synthesis and performance of Fe-based PGM-free catalysts in acidic and alkaline media: evolution of surface chemistry and morphology10.1021/acsaem.9b00331 ↗
43. Consistency of carbon nanopore characteristics derived from adsorption of simple gases and 2D-NLDFT models. Advantages of using adsorption isotherms of oxygen (O2) at 77 K10.1016/j.jcis.2019.01.116 ↗
44. Mercury intrusion porosimetry and image analysis of cement-based materials10.1006/jcis.1998.5986 ↗
45. A study on micro-pore characteristics of clay due to freeze-thaw and compression by mercury intrusion porosimetry10.3389/feart.2019.00344 ↗
46. Vibrational structure and partial rates of resonant Auger decay of the $\mathrm{N}1\stackrel{\ensuremath{\rightarrow}}{s}2\ensuremath{\pi}$ core excitations in nitric oxide
47. Violation of the franck-condon principle due to recoil effects in high energy molecular core-level photoionization10.1103/PhysRevLett.95.133001 ↗
48. FinEstBeaMS – a wide-range Finnish-Estonian beamline for materials science at the 1.5GeV storage ring at the MAX IV laboratory10.1016/j.nima.2017.04.002 ↗
49. Gas-phase endstation of electron, ion and coincidence spectroscopies for diluted samples at the FinEstBeAMS beamline of the MAX IV 1.5 GeV storage ring10.1107/S1600577520007146 ↗
50. Performance and characterization of the FinEstBeAMS beamline at the MAX IV laboratory10.1107/S1600577521006032 ↗
51. Understanding how single-atom site density drives the performance and durability of PGM-free Fe–N–C cathodes in anion exchange membrane fuel cells, Mater
52. Understanding recoverable vs unrecoverable voltage losses and long-term degradation mechanisms in anion exchange membrane fuel cells10.1021/acscatal.2c01880 ↗
53. High-performing commercial Fe–N–C cathode electrocatalyst for anion-exchange membrane fuel cells10.1038/s41560-021-00878-7 ↗
54. Preparation of activated carbon by chemical activation with ZnCl210.1016/0008-6223(91)90179-M ↗
55. Microporous–mesoporous carbons for energy storage synthesized by activation of carbonaceous material by zinc chloride, potassium hydroxide or mixture of them10.1016/j.jpowsour.2016.04.038 ↗
56. Fabrication of platinum group metal-free catalyst layer with enhanced mass transport characteristics via an electrospraying technique
57. Direct observations of liquid water formation at nano- and micro-scale in platinum group metal-free electrodes by operando X-ray computed tomography10.1016/j.mtener.2018.05.011 ↗
58. Single atomic iron catalysts for oxygen reduction in acidic media: particle size control and thermal activation10.1021/jacs.7b06514 ↗
59. Nitrogen-coordinated single cobalt atom catalysts for oxygen reduction in proton exchange membrane fuel cells
60. Molten NaCl-assisted synthesis of porous Fe-N-C electrocatalysts with a high density of catalytically accessible FeN4 active sites and outstanding oxygen reduction reaction performance
61. NEXAFS spectroscopy study of lithium interaction with nitrogen incorporated in porous graphitic material10.1007/s10853-019-03586-6 ↗
62. Nature of the N–Pd interaction in nitrogen-doped carbon nanotube catalysts10.1021/acscatal.5b00094 ↗
63. High-purity pyrrole-type FeN4 sites as a superior oxygen reduction electrocatalyst10.1039/C9EE03027A ↗
64. Study of the evolution of FeNxCy and Fe3C species in Fe/N/C catalysts during the oxygen reduction reaction in acid and alkaline electrolyte10.1016/j.jpowsour.2021.229487 ↗
65. Maximizing the active site densities of single-atomic Fe–N–C electrocatalysts for high-performance anion membrane fuel cells10.1021/acsaem.0c02650 ↗
66. Effect of ball-milling on the oxygen reduction reaction activity of iron and nitrogen Co-doped carbide-derived carbon catalysts in acid media10.1021/acsaem.9b01430 ↗
67. Opening of bottleneck pores for the improvement of nitrogen doped carbon electrocatalysts10.1002/aenm.201502389 ↗
68. Heat-treated Fe/N/C catalysts for O2 electroreduction: are active sites hosted in micropores?10.1021/jp057135h ↗
69. Structural and mechanistic basis for the high activity of Fe–N–C catalysts toward oxygen reduction10.1039/C6EE01160H ↗
70. Fe-N-C electrocatalysts with densely accessible Fe-N4 sites for efficient oxygen reduction reaction10.1002/adfm.202102420 ↗
71. Thermally driven structure and performance evolution of atomically dispersed FeN4 sites for oxygen reduction10.1002/anie.201909312 ↗
72. Porphyrin aerogel catalysts for oxygen reduction reaction in anion-exchange membrane fuel cells10.1002/adfm.202100963 ↗
73. Chemistry of multitudinous active sites for oxygen reduction reaction in transition metal–nitrogen–carbon electrocatalysts10.1021/acs.jpcc.5b07653 ↗
74. Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst10.1126/science.aan2255 ↗
75. Nanostructured nonprecious metal catalysts for oxygen reduction reaction10.1021/ar400011z ↗
76. Carbon-supported iron phosphides: highest intrinsic oxygen evolution activity of the iron triad10.1021/acsaem.8b00861 ↗
77. In-situ growth of iron phosphide encapsulated by carbon nanotubes decorated with zeolitic imidazolate framework-8 for enhancing oxygen reduction reaction10.1016/j.ijhydene.2022.03.228 ↗
78. Iron phosphide doped, porous carbon as an efficient electrocatalyst for oxygen reduction reaction10.1021/acsaem.9b02250 ↗
79. Iron phosphide incorporated into iron-treated heteroatoms-doped porous bio-carbon as efficient electrocatalyst for the oxygen reduction reaction10.1002/celc.201800091 ↗
80. Establishing reactivity descriptors for platinum group metal (PGM)-free Fe–N–C catalysts for PEM fuel cells10.1039/D0EE01013H ↗
81. State-of-the-art and developmental trends in platinum group metal-free cathode catalyst for anion exchange membrane fuel cell (AEMFC)10.1016/j.apcatb.2022.121733 ↗
82. RRDE and voltammetric study of ORR on pyrolyzed Fe/polyaniline catalyst. On the origins of variable Tafel slopes10.1021/jp108350t ↗
83. Identification of catalytic sites in cobalt-nitrogen-carbon materials for the oxygen reduction reaction10.1038/s41467-017-01100-7 ↗
84. Impact of loading in RRDE experiments on Fe–N–C catalysts: two- or four-electron oxygen reduction?10.1149/1.2904768 ↗
85. Review on the degradation mechanisms of metal-N-C catalysts for the oxygen reduction reaction in acid electrolyte: current understanding and mitigation approaches10.1021/acs.chemrev.2c00685 ↗
86. pH dependence of catalytic activity for ORR of the non-PGM catalyst derived from heat-treated Fe–phenanthroline10.1016/j.electacta.2012.09.053 ↗
87. Effect of pH on the activity of platinum group metal-free catalysts in oxygen reduction reaction10.1021/acscatal.7b03991 ↗
88. Understanding how high-performance anion exchange membrane fuel cells were achieved: component, interfacial, and cell-level factors10.1016/j.coelec.2018.11.010 ↗
89. Promoting oxygen reduction reaction activity of Fe–N/C electrocatalysts by silica-coating-mediated synthesis for anion-exchange membrane fuel cells10.1021/acs.chemmater.8b02117 ↗
90. Transition-metal- and nitrogen-doped carbide-derived carbon/carbon nanotube composites as cathode catalysts for anion-exchange membrane fuel cells10.1021/acscatal.0c03511 ↗
91. Synergistic Mn-Co catalyst outperforms Pt on high-rate oxygen reduction for alkaline polymer electrolyte fuel cells10.1038/s41467-019-09503-4 ↗
92. High-loading composition-tolerant Co–Mn spinel oxides with performance beyond 1 W/cm2 in alkaline polymer electrolyte fuel cells10.1021/acsenergylett.9b00597 ↗
93. High performance FeNC and Mn-oxide/FeNC layers for AEMFC cathodes10.1149/1945-7111/abb7e0 ↗
94. Lamellar metal organic framework-derived Fe–N–C non-noble electrocatalysts with bimodal porosity for efficient oxygen reduction10.1021/acsami.6b15154 ↗
95. Hierarchically porous carbons with optimized nitrogen doping as highly active electrocatalysts for oxygen reduction10.1038/ncomms5973 ↗
96. A facile activation strategy for an MOF-derived metal-free oxygen reduction reaction catalyst: direct access to optimized pore structure and nitrogen species10.1021/acscatal.7b01649 ↗
97. Melamine-sponge-derived non-precious fuel cell electrocatalyst with hierarchical pores and tunable nitrogen chemical states for exceptional oxygen reduction reaction activity10.1016/j.mtener.2018.05.014 ↗