journal article·2023-02

A robust numerical treatment of solid-phase diffusion in pseudo two-dimensional lithium-ion battery models

Jinyong Kim, Anudeep Mallarapu, Shriram Santhanagopalan, John Newman

Publisher page

Abstract

Solid-phase diffusion in active materials of lithium-ion batteries significantly affects charging and safety-related behavior of lithium-ion batteries. Therefore, it is essential to develop an efficient and robust numerical algorithm for solving solid-phase diffusion equations in physics-based battery models. In this work, we discuss the origins of numerical instabilities that can occur when solving the solid-phase diffusion equations using iterative methods. Then, in order to resolve such issues, we propose a simple numerical treatment to the surface flux term of discretized solid-phase diffusion equations. To demonstrate its numerical robustness, the proposed method is implemented into a pseudo two-dimensional (P2D) physics-based battery model and simulations are conducted at wide ranges of operating conditions. Even with extremely poor initial guesses for the Li + concentrations of the active materials, computations using the proposed method do not diverge and the their computational speeds are comparable to those with conventional initial guesses. Comprehensive tests of the proposed method are also performed with a dynamic current profile based on US06 driving profile and a multi-stage charging profile with very high initial C-rate (12C).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries10.1016/j.jpowsour.2018.09.069 ↗
2. Modeling of lithium plating induced aging of lithium-ion batteries: transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
3. Model-instructed design of novel charging protocols for the extreme fast charging of lithium-ion batteries without lithium plating10.1149/1945-7111/ab8c84 ↗
4. Electrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cells10.1016/j.electacta.2020.135854 ↗
5. Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part I - analytical diffusion model10.1016/j.electacta.2020.136034 ↗
6. Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part II - numerical model10.1016/j.electacta.2020.136013 ↗
7. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
8. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
9. Sun · 2020
10. An overview on thermal safety issues of lithium-ion batteries for electric vehicle application10.1109/ACCESS.2018.2824838 ↗
11. Numerical investigation of thermal runaway mitigation through a passive thermal management system10.1016/j.jpowsour.2019.04.091 ↗
12. Modeling cell venting and gas-phase reactions in 18650 lithium ion batteries during thermal runaway10.1016/j.jpowsour.2021.229496 ↗
13. Modeling extreme deformations in lithium ion batteries10.1016/j.etran.2020.100065 ↗
14. Transport processes in a Li-ion cell during an internal short-circuit10.1149/1945-7111/ab995d ↗
15. Passive mitigation of cascading propagation in multi-cell lithium ion batteries10.1149/1945-7111/ab84fa ↗
16. Orendorff · 2014
17. Failure propagation in multi-cell lithium ion batteries10.1016/j.jpowsour.2014.10.081 ↗
18. Modeling nail penetration process in large-format Li-ion cells10.1149/2.1071501jes ↗
19. Modeling internal shorting process in large-format Li-ion cells10.1149/2.1031507jes ↗
20. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
21. Thermal and electrochemical coupled modeling of a lithium-ion cell, in lithium batteries
22. Smith · 2006 · 161 · 628
23. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
24. Doyle · 1993 · 140 · 1526
25. Simulation of temperature rise in Li-ion cells at very high currents10.1016/j.jpowsour.2014.08.033 ↗
26. Methods - PETLION : open-source software for millisecond-scale porous electrode theory-based lithium-ion battery simulations10.1149/1945-7111/ac201c ↗
27. Patankar · 1980
28. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
29. Coordinate transformation, orthogonal collocation, model reformulation and simulation of electrochemical-thermal behavior of lithium-ion battery stacks10.1149/2.058112jes ↗
30. Efficient reformulation of solid-phase diffusion in physics-based lithium-ion battery models10.1149/1.3425622 ↗
31. Investigation of projection-based model-reduction techniques for solid-phase diffusion in Li-ion batteries
32. Simplification of physics-based electrochemical model for lithium ion battery on electric vehicle. Part I: diffusion simplification and single particle model10.1016/j.jpowsour.2014.12.101 ↗
33. Model order reduction of 1D diffusion systems via residue grouping10.1115/1.2807068 ↗
34. Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries10.1016/j.jpowsour.2016.07.036 ↗
35. Model order reduction for solid-phase diffusion in physics-based lithium ion cell models10.1016/j.jpowsour.2012.07.007 ↗
36. Simplification and order reduction of lithium-ion battery model based on porous-electrode theory10.1016/j.jpowsour.2011.09.034 ↗
37. Approximate solutions for galvanostatic discharge of spherical particles I. Constant diffusion coefficient10.1149/1.1409397 ↗
38. Variable diffusivity in intercalation materials: a theoretical approach10.1149/1.1836631 ↗
39. GITT studies on oxide cathode LiNi1/3Co1/3Mn 1/3O2 synthesized by citric acid assisted high-energy ball milling10.1007/s12034-013-0480-1 ↗
40. Spurious chemical diffusion coefficients of Li+ in electrode materials evaluated with GITT10.1016/j.electacta.2004.11.042 ↗
41. Modeling of lithium-ion batteries10.1016/S0378-7753(03)00282-9 ↗
42. Newman · 2012
43. LIONSIMBA: a matlab framework based on a finite volume model suitable for Li-ion battery design, simulation, and control10.1149/2.0291607jes ↗
44. Ansys Fluent
45. Python battery mathematical modelling (PyBaMM)10.5334/jors.309 ↗
46. ODES: a high level interface to ODE and DAE solvers10.21105/joss.00165 ↗
47. Hindmarsh · 2000
48. SUNDIALS: suite of nonlinear and differential/algebraic equation solvers10.1145/1089014.1089020 ↗
49. Newton-Krylov-Multigrid algorithms for battery simulation10.1149/1.1505635 ↗
50. Numerical comparison of iterative methods for solving nonlinear equations
51. Multi-domain modeling of lithium-ion batteries encompassing multi-physics in varied length scales10.1149/1.3597614 ↗
52. Proton diffusion in nickel hydroxide: prediction of active material utilization10.1149/1.1838205 ↗
53. Development of first principles capacity fade model for Li-ion cells10.1149/1.1634273 ↗
54. Extension of physics-based single particle model for higher charge-discharge rates10.1016/j.jpowsour.2012.09.084 ↗
55. Transport properties of LiPF 6 -based Li-ion battery electrolytes10.1149/1.1872737 ↗
56. Free energy and temperature dependence10.1126/science.251.4996.919 ↗
57. Multiphase porous electrode theory10.1149/2.0171711jes ↗
58. Asymmetric temperature modulation for extreme fast charging of lithium-ion batteries10.1016/j.joule.2019.09.021 ↗
59. A numerically efficient method of solving the full-order pseudo-2-dimensional (P2D) Li-ion cell model10.1016/j.jpowsour.2021.229571 ↗
60. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
61. Micro-scale modeling of Li-ion batteries: parameterization and validation10.1149/2.096205jes ↗
62. Comparing macroscale and microscale simulations of porous battery electrodes10.1149/2.0501711jes ↗
63. Modeling all-solid-state Li-ion batteries10.1149/1.3521414 ↗
64. Charge/discharge simulation of an all-solid-state thin-film battery using a one-dimensional model10.1149/2.041202jes ↗