A model based investigation of evaporative cooling for polymer electrolyte fuel cells – Stack level analysis
Source abstract
Abstract
Conventional cooling systems of polymer electrolyte fuel cells are responsible for a significant share of stack and system volume, mass and cost. Evaporative cooling shows the potential to overcome these hurdles by simplifying the design of bipolar plates and eliminating the need for an external humidifier. Thus, evaporative cooling can significantly contribute towards reaching the DOE fuel cell system power density target of 850 W/L. This paper investigates the potentials and limits of evaporative cooling at stack level. For this, a zero-dimensional model has been developed, incorporating mass and energy balances as well as electrochemistry and evaporation. Main findings show that evaporative cooling is feasible over a wide range of operating conditions. The cooling performance is a function of temperature, gas pressures and stoichiometric ratios, where the temperature shows the largest leverage. A feasible operating window is proposed, which is slightly shifted towards higher temperatures (80–95 °C), lower pressures (100–200 kPa) and higher cathode stoichiometric ratios (>1.5) compared to conventional fuel cells. A slight decrease in electrochemical performance (ca. 3% at 1.5 A/cm2) is easily compensated by the volume and weight saving potential of up to 30% and thus substantially reduced cost.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
2. Recent advances in the development of hyundai kia's fuel cell electric vehicles10.4271/2010-01-1089 ↗
3. Fuel cell powertrain for FCX clarity
4. Hyundai delivers first XCIENT Fuel Cell trucks to Switzerland
5. Current status of hybrid, battery and fuel cell electric vehicles: from electrochemistry to market prospects10.1016/j.electacta.2012.03.172 ↗
6. Thermodynamic real gas analysis of a tank filling process10.1016/j.ijhydene.2014.03.028 ↗
7. Juriga
8. Fuel cell electric vehicles and hydrogen infrastructure: status 201210.1039/c2ee22596d ↗
9. Development of system control for rapid warm-up operation of fuel cell10.4271/2012-01-1230 ↗
10. Recent advances and challenges of fuel cell based power system architectures and control – a review10.1016/j.rser.2017.01.148 ↗
11. Wilson · 2017
12. 2016
13. Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells10.1016/j.joei.2016.07.002 ↗
14. A critical review of cooling techniques in proton exchange membrane fuel cell stacks10.1016/j.ijhydene.2011.11.010 ↗
15. From the cell to the stack. A chronological walk through the techniques to manufacture the PEFCs core10.1016/j.rser.2018.07.036 ↗
16. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
17. Parametric analysis of simultaneous humidification and cooling for PEMFCs using direct water injection method10.1016/j.ijhydene.2017.03.201 ↗
18. An experimental study on the cathode humidification and evaporative cooling of polymer electrolyte membrane fuel cells using direct water injection method at high current densities10.1016/j.applthermaleng.2016.01.091 ↗
19. Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells10.1016/S0013-4686(98)00139-X ↗
20. Cohen · 1991
21. Kunz · 1992
22. Warburton · 2013
23. Carnevale · 2017
24. Evaporatively-cooled PEM fuel-cell stack and system10.1149/1.2356240 ↗
25. Scheibert · 2011
26. Katz · 1993
27. Goebel · 2005
28. Maisotsenko · 2004
29. Stedman · 1973
30. Novel concept for evaporative cooling of fuel cells: an experimental study based on neutron imaging10.1002/fuce.201700232 ↗
31. Engineered water highways in fuel cells: radiation grafting of gas diffusion layers10.1002/adma.201503557 ↗
32. System thermal and water balance in an evaporatively cooled PEM fuel cell vehicle
33. Temperature regulation in an evaporatively cooled proton exchange membrane fuel cell stack10.1016/j.ijhydene.2015.04.086 ↗
34. A comparison of evaporative and liquid cooling methods for fuel cell vehicles10.1016/j.ijhydene.2016.06.089 ↗
35. A control oriented simulation model of an evaporation cooled polymer electrolyte membrane fuel cell system10.3182/20110828-6-IT-1002.00311 ↗
36. Understanding porous water-transport plates in polymer-electrolyte fuel cells10.1016/j.jpowsour.2007.02.078 ↗
37. Enabling high power density fuel cells by evaporative cooling with advanced porous media10.1149/1945-7111/ab8e82 ↗
38. Modeling the effects of using gas diffusion layers with patterned wettability for advanced water management in proton exchange membrane fuel cells
39. A pore-level direct numerical investigation of water evaporation characteristics under air and hydrogen in the gas diffusion layers of polymer electrolyte fuel cells10.1016/j.ijheatmasstransfer.2018.10.042 ↗
40. Experimental and pore-level numerical investigation of water evaporation in gas diffusion layers of polymer electrolyte fuel cells10.1016/j.ijheatmasstransfer.2017.07.050 ↗
41. An ensemble Monte Carlo simulation study of water distribution in porous gas diffusion layers for proton exchange membrane fuel cells
42. Determination of water evaporation rates in gas diffusion layers of fuel cells10.1149/2.0831809jes ↗
43. Investigating evaporation in gas diffusion layers for fuel cells with X-ray computed tomography10.1021/acs.jpcc.6b10658 ↗
44. Mass transport limitations of water evaporation in polymer electrolyte fuel cell gas diffusion layers10.3390/en14102967 ↗
45. Brandstätter
46. A novel approach for dynamic gas conditioning for PEMFC stack testing10.1016/j.ijhydene.2017.09.076 ↗
47. 2021
48. A family of embedded Runge-Kutta formulae10.1016/0771-050X(80)90013-3 ↗
49. Linstrom · 2021 · 20899
50. Proton exchange membrane fuel cell (PEMFC) down-the-channel performance model
51. Effect of relative humidity on oxygen reduction kinetics in a PEMFC10.1149/1.1897368 ↗
52. Determination of catalyst unique parameters for the oxygen reduction reaction in a PEMFC10.1149/1.2266294 ↗
53. Voltage cycling induced losses in electrochemically active surface area and in H 2
54. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
55. Impact of microporous layer pore properties on liquid water transport in PEM fuel cells: carbon black type and perforation10.1149/2.1321714jes ↗
56. Simon · 2020
57. Studies on the thermal stability of the perfluorinated cation-exchange membrane Nafion-41710.1007/BF01912735 ↗
58. Thermal stability of Nafion® in simulated fuel cell environments10.1149/1.1836669 ↗
59. Thermal behavior of nafion membranes10.1023/A:1010196226309 ↗
60. Advanced water management in PEFCs: diffusion layers with patterned wettability II. Measurement of capillary pressure characteristic with neutron and synchrotron imaging10.1149/2.0511609jes ↗
61. Kurtz · 2019