High rate capability composite particles with root-inspired hierarchical channel structure
Source abstract
Abstract
Abstract Composite particle with high speed channels for delivering lithium is a promising candidate for the high performance electrode in electric vehicles. However, it still suffers from poor rate capability due to the long diffusion pathway caused by large particle size. Inspired by the efficient transporting ability of the hierarchical structure in tree roots, we design the channel structure to improve the rate capability using a diffuse interface model. This model enables us to simulate the fast lithium diffusion along the channel network and the electrochemical reaction on the particle surface. Our results demonstrate that two microstructure features of the channel network can efficiently enhance the rate capacity: One is the gradient distribution of the channel density with a higher channel density near the surface than that in the center; the other is the orientation of the channel structure parallel to lithium flux from the particle surface. The root-inspired hierarchical channel network displaying these two features can improve the capacity retention at large C-rates. Furthermore, our study can offer an efficient tool that can rationalize the topology design of channel structure in the purpose of achieving a high rate capability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Identifying the limiting electrode in lithium ion batteries for extreme fast charging10.1016/j.elecom.2018.10.007 ↗
2. A review of advanced and practical lithium battery materials10.1039/c0jm04225k ↗
3. Enabling fast charging-A battery technology gap assessment10.1016/j.jpowsour.2017.06.055 ↗
4. Quantifying the factors limiting rate performance in battery electrodes10.1038/s41467-019-09792-9 ↗
5. Fe-doped LiMnPO4@C nanofibers with high Li-ion diffusion coefficient10.1016/j.carbon.2019.11.067 ↗
6. Recent developments in the doping of LiNi0.5Mn1.5O4 cathode material for 5 V lithium-ion batteries10.1007/s11581-011-0550-6 ↗
7. High-rate LiFePO4 electrode material synthesized by a novel route from FePO4 • 4H2O10.1002/adfm.200600442 ↗
8. Nanocrystalline and thin film Germanium electrodes with high Lithium capacity and high rate capabilities10.1149/1.1697412 ↗
9. The role of nanotechnology in the development of battery materials for electric vehicles10.1038/nnano.2016.207 ↗
10. Eduard Arzt, T. John Balk, observation of giant diffusivity along dislocation cores10.1126/science.1151771 ↗
11. Competitive ion diffusion within grain boundary and grain interiors in polycrystalline electrodes with the inclusion of stress field10.1149/2.0121713jes ↗
12. Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries10.1016/j.jpowsour.2019.03.014 ↗
13. A nacre-inspired separator coating for impact-tolerant Lithium batteries10.1002/adma.201905711 ↗
14. Bioinspired, spine-like, flexible, rechargeable Lithium-ion batteries with high energy density10.1002/adma.201704947 ↗
15. Watermelon-inspired Si/C microspheres with hierarchical buffer structures for densely compacted Lithium-ion battery anodes10.1002/aenm.201601481 ↗
16. Wood-inspired high-performance ultrathick bulk battery electrodes10.1002/adma.201706745 ↗
17. The influence of geometry in 2D simulation on the charge/discharge processes in Li-ion batteries10.1016/j.jelechem.2012.06.015 ↗
18. Radially aligned hierarchical columnar structure as a cathode material for high energy density sodium-ion batteries10.1038/ncomms7865 ↗
19. A highly stabilized Ni-rich NCA cathode for high-energy lithium-ion batteries10.1016/j.mattod.2020.01.019 ↗
20. Radially oriented single-crystal primary nanosheets enable ultrahigh rate and cycling properties of LiNi0.8Co0.1Mn0.1O2 cathode material for Lithium-ion batteries10.1002/aenm.201803963 ↗
21. Understanding the rate capability of high‐energy‐density Li‐rich layered Li1.2Ni0.15Co0.1Mn0.55O2 cathode materials10.1002/aenm.201300950 ↗
22. A review on modeling of electro-chemo-mechanics in lithium-ion batteries10.1016/j.jpowsour.2018.12.011 ↗
23. Effect of positive electrode microstructure in all-solid-state lithium-ion battery on high-rate discharge capability10.1016/j.ssi.2019.115079 ↗
24. Numerical study of Li diffusion in polycrystalline LiCoO210.1016/j.jpowsour.2012.09.055 ↗
25. Smoothed boundary method for simulating bulk and grain boundary transport in complex polycrystalline microstructures10.1016/j.commatsci.2016.04.028 ↗
26. Computer simulation of topological evolution in 2-D grain growth using a continuum diffuse-interface field model10.1016/S1359-6454(96)00221-2 ↗
27. Extended smoothed boundary method for solving partial differential equations with general boundary conditions on complex boundaries10.1088/0965-0393/20/7/075008 ↗
28. Intergranular cracking as a major cause of long-term capacity fading of layered cathodes10.1021/acs.nanolett.7b00379 ↗
29. Computer simulation of 3-D grain growth using a phase-field model10.1016/S1359-6454(02)00084-8 ↗
30. Phase field model for two-phase lithiation in an arbitrarily shaped elastoplastic electrode particle under galvanostatic and potentiostatic operations10.1016/j.ijsolstr.2018.02.033 ↗
31. Multiphase porous electrode theory10.1149/2.0171711jes ↗
32. Kinetics of nanoparticle interactions in battery electrodes10.1149/2.0481506jes ↗
33. Effects of particle shape and concurrent plasticity on stress generation during lithiation in particulate Li-ion battery electrodes10.1016/j.mechmat.2015.03.010 ↗
34. Self-assembled LiNi1/3Co1/3 Mn1/3O2 nanosheet cathodes with tunable rate capability10.1016/j.nanoen.2015.07.031 ↗
35. A chemo-mechanical grain boundary model and its application to understand the damage of Li-ion battery materials10.1016/j.scriptamat.2020.03.027 ↗
36. Numerical study of grain boundary effect on Li+ effective diffusivity and intercalation-induced stresses in Li-ion battery active materials10.1016/j.jpowsour.2013.03.135 ↗
37. Theory of coherent nucleation in phase-separating nanoparticles10.1021/nl400497t ↗
38. The effect of surface-bulk potential difference on the kinetics of intercalation in core-shell active cathode particles10.1016/j.jpowsour.2018.02.023 ↗
39. Hierarchical nanostructures are crucial to mitigate ultrasmall thermal point loads10.1021/nl900399b ↗
40. Heuristic solution for achieving long-term cycle stability for Ni-rich layered cathodes at full depth of discharge10.1038/s41560-020-00693-6 ↗
41. Large deformation analysis of diffusion-induced buckling of nanowires in lithium-ion batteries10.1016/j.ijsolstr.2016.12.020 ↗
42. Chemomechanical modeling of lithiation-induced failure in high-volume-change electrode materials for lithium ion batteries10.1038/s41524-017-0009-z ↗
43. Understanding size-dependent migration of a two-phase lithiation front coupled to stress10.1007/s00707-018-2303-3 ↗
44. Effect of plasticity on voltage decay studied by a stress coupled phase field reaction model10.1016/j.eml.2020.101152 ↗
45. Deformation and stress in electrode materials for Li-ion batteries10.1016/j.pmatsci.2014.02.001 ↗
46. A chemo-mechanical model of lithiation in silicon10.1016/j.jmps.2014.06.004 ↗
47. An agglomerate model for the impedance of secondary particle in lithium-ion battery electrode10.1149/2.027408jes ↗
48. High rate discharge capability of single particle electrode of LiCoO210.1016/j.jpowsour.2008.07.081 ↗