journal article·2019-12Open access

Carbon nanotube reinforced nanocomposites for energy conversion and storage

Oluwafunmilola Ola, Qijian Niu, Yu Chen, Yongde Xia, Yanqiu Zhu

Abstract

CNT-reinforced foams comprised of three-dimensional (3D) interconnected macropores with uniform mesoporous walls were developed as multifunctional nanocomposites and tested for electrochemical energy conversion and storage. Multi-walled CNTs grown on the wall surface of the interconnected scaffold structure of carbon foams were found to improve the surface area and electrochemical properties of the nanocomposites. The lightweight CNT-reinforced nanocomposites not only exhibit high structural flexibility, but also possess enhanced electrocatalytic performance for HER at current density of 10 mA cm−2 with overpotentials of 240 mV. In addition, these nanocomposites can be used as flexible, electric double layer capacitor electrodes, and have achieved a specific capacitance of 776 F g−1, with excellent durability and stability after 1000 cycles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. “Polymer nanocomposite foams”10.1039/c2ta00086e ↗
2. “Chapter 3 - carbon nanotubes for defect monitoring in fiber-reinforced polymer composites A2 - peng, huisheng”
3. “Three-dimensional carbon nanotube based polymer composites for thermal management”10.1016/j.compositesa.2016.08.035 ↗
4. “Chapter 15 - challenge and opportunities of carbon nanotubes A2 - peng, huisheng”
5. “Carbon nanotube sponges”10.1002/adma.200902986 ↗
6. “Polymer‐embedded carbon nanotube ribbons for stretchable conductors”10.1002/adma.200904426 ↗
7. “Electromechanical actuation with controllable motion based on a single-walled carbon nanotube and natural biopolymer composite”10.1021/nn1006013 ↗
8. “Electrochemical reduction of CO2 to synthesis gas on CNT supported CuxZn1-x O catalysts”
9. “Thermal conductivity enhancement of CNT/MoS2/graphene−epoxy nanocomposites based on structural synergistic effects and interpenetrating network”10.1016/j.compositesb.2018.11.005 ↗
10. Inagaki · 2013
11. “Soft, highly conductive nanotube sponges and composites with controlled compressibility”10.1021/nn100114d ↗
12. “High-pressure pyrolysis of melamine route to nitrogen-doped conical hollow and bamboo-like carbon nanotubes”10.1016/j.diamond.2005.09.018 ↗
13. “Self-organized growth of bamboo-like carbon nanotube arrays for field emission properties”10.1007/s13204-012-0102-z ↗
14. “Melamine formaldehyde: curing studies and reaction mechanism”
15. “Interpretation of infrared and Raman spectra of amorphous carbon nitrides”10.1103/PhysRevB.67.155306 ↗
16. “Melamine-derived carbon sponges for oil-water separation”10.1016/j.carbon.2016.05.059 ↗
17. Raj · 2010
18. “Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition”10.1038/nmat3001 ↗
19. “Determination of free melamine content in melamine-formaldehyde resins by Raman spectroscopy”10.1016/0924-2031(94)00091-T ↗
20. “Characterization of graphite oxide and reduced graphene oxide obtained from different graphite precursors and oxidized by different methods using Raman spectroscopy”10.3390/ma11071050 ↗
21. “Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition”10.1021/nl801827v ↗
22. “Graphene thickness control via gas-phase dynamics in chemical vapor deposition”10.1021/jp210814j ↗
23. “Effects of Al interlayer coating and thermal treatment on electron emission characteristics of carbon nanotubes deposited by electrophoretic method”10.1186/1556-276X-9-236 ↗
24. “A coaxial structure of multiwall carbon nanotubes on vertically aligned Si nanorods and its intrinsic characteristics”10.1039/C4TC01251H ↗
25. “Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing”10.1039/C6TC03713E ↗
26. “Three-dimensional sponges with super mechanical stability: harnessing true elasticity of individual carbon nanotubes in macroscopic architectures”10.1038/srep18930 ↗
27. “Molybdenum sulfide/N-doped CNT forest hybrid catalysts for high-performance hydrogen evolution reaction”10.1021/nl404108a ↗
28. “Three-dimensional carbon foam/N-doped graphene@MoS2 hybrid nanostructures as effective electrocatalysts for the hydrogen evolution reaction”10.1039/C6TA03458F ↗
29. “A clean and facile synthesis strategy of MoS2 nanosheets grown on multi-wall CNTs for enhanced hydrogen evolution reaction performance”10.1038/s41598-017-09047-x ↗