journal article·2015-05Open access

Baseline Si electrode fabrication and performance for the battery for Advanced Transportation Technologies Program

Wen Yuan, Mingyan Wu, Hui Zhao, Xiangyun Song, Gao Liu

Abstract

Abstract Baseline Si electrodes were developed and characterized based on Si nanomaterials. Silicon (Si) with a designed nanostructure has attracted much attention as potential anode materials for lithium-ion batteries due to its high gravimetric specific capacity. Because of a resulted poor tap density of Si from the electrode while using nano-sized Si and also from including other additives like conductive carbon and binder, it is difficult to maintain a high loading of active materials at the anode side in lithium-ion batteries. In this report, we aim to investigate how the thickness of Si-based electrode influences the cycling performance, rate performance and impedance. We also discuss the variation of gravimetric, area and volumetric capacity along with increasing of electrode thickness. It is found that with a thinner electrode of 7 μm the volumetric capacity could reach up to 920 mAh cm −3 but a poor area capacity of 0.7 mAh cm −2 , while a thicker one of 33 μm enables to provide a high area capacity up to 1.5 mAh cm −2 and gives a volumetric capacity less than 500 mAh cm −3 . A cell operated under 0 °C shows a gravimetric capacity of 2000 mAh g −1 after 60 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. All-solid lithium electrodes with mixed-conductor matrix10.1149/1.2127495 ↗
2. An in situ X-ray diffraction study of the reaction of Li with crystalline Si10.1149/1.2409862 ↗
3. A systematic investigation of polymer binder flexibility on the electrode performance of lithium-ion batteries,10.1021/am504736y ↗
4. Si electrodes for Li-ion batteries – A new way to look at an old problem10.1149/1.2817828 ↗
5. Metal current collector-free freestanding silicon-carbon 1D nanocomposites for ultralight anodes in lithium ion batteries10.1016/j.jpowsour.2010.06.108 ↗
6. Etched graphite with internally grown Si nanowires from pores as an anode for high density Li-ion batteries10.1021/nl401836c ↗
7. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
8. Synthesis and characterization of the hole-conducting silica/polymer nanocomposites and application in solid-state dye-sensitized solar cell10.1021/am4001858 ↗
9. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
10. Failure modes of silicon powder negative electrode in lithium secondary batteries10.1149/1.1792242 ↗
11. Stress generation and fracture in lithium insertion materials10.1007/s10008-006-0095-1 ↗
12. Theoretical analysis of stresses in a lithium ion cell10.1149/1.3261809 ↗
13. Toward an ideal polymer binder design for high-capacity battery anodes10.1021/ja4054465 ↗
14. In situ formed Si nanoparticle network with micron-sized Si particles for lithium-ion battery anodes10.1021/nl402953h ↗
15. A novel polymer gel electrolyte: direct polymerization of ionic liquid from surface of silica nanoparticles,10.1002/pola.26980 ↗
16. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
17. High-performance lithium-ion anodes using a hierarchical bottom-up approach10.1038/nmat2725 ↗
18. Composite electrolytes comprised of poly(ethylene oxide) and silica nanoparticles with grafted poly(ethylene oxide)-containing polymers10.1039/C4RA07262F ↗
19. Porous doped silicon nanowires for lithium ion battery anode with long cycle life10.1021/nl300206e ↗
20. Hierarchical micro/nano porous silicon Li-ion battery anodes10.1039/c2cc31476b ↗
21. High-performance macroporous bulk silicon anodes synthesized by template-free chemical etching10.1002/aenm.201100765 ↗
22. Three-dimensional porous silicon particles for use in high-performance lithium secondary batteries10.1002/anie.200804355 ↗
23. Optimization of acetylene black conductive additive and PVDF composition for high-power rechargeable lithium-ion cells10.1149/1.2792293 ↗