A fluorinated ether electrolyte for high-performance lithium metal batteries: Compatibility with LiPF6 and long-term cycling
Source abstract
Abstract
Advanced non-aqueous electrolytes are crucial for the development of high-performance lithium-metal batteries (LMBs). While fluorinated ether solvents offer a promising pathway to enhance electrochemical stability, their compatibility with the commonly used LiPF₆ salt remains a challenge. This study introduces 2,2-difluoro-1,3-dimethoxypropane (FDMPr), a novel fluorinated ether solvent designed, synthesized, and characterized for its efficient LiPF₆ solvation. A 1 M LiPF₆ solution in FDMPr:FEC (9:1 v/v) at 25 °C exhibits an ionic conductivity of 4.65 mS cm⁻ 1, a low viscosity of 2.71 mPa s, and effectively suppresses aluminum corrosion. DFT calculations predict a wide electrochemical stability window for FDMPr, along with a suitable dipole moment and moderate Li⁺ binding energies, indicating good solvation properties. When paired with NMC811 cathodes with commercially relevant electrode loadings of 2.3 mAh/cm 2 and lithium-metal anodes in coin cells, the FDMPr-based electrolyte demonstrates robust cycling stability, retaining 80 % of its discharge capacity after 520 cycles with average Coulombic efficiencies exceeding 99.85 %. This work highlights the importance of chemical design in developing high-performance electrolytes for high-energy-density and long-life LMB technologies.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Current status and future perspective on lithium metal anode production methods10.1002/aenm.202203744 ↗
2. Self-assembled monolayers direct a LiF-rich interphase toward long-life lithium metal batteries10.1126/science.abn1818 ↗
3. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
4. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
5. Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries10.1038/s41565-018-0183-2 ↗
6. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
7. Key issues hindering a practical lithium-metal anode10.1016/j.trechm.2019.02.015 ↗
8. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
9. Tian · Mater. Futures · 2023 · 210.1088/2752-5724/acac68 ↗
10. Review—localized high-concentration electrolytes for lithium batteries10.1149/1945-7111/abd60e ↗
11. Localized high-concentration electrolytes get more localized through micelle-like structures10.1038/s41563-023-01700-3 ↗
12. Localized high-concentration electrolytes for lithium metal batteries: progress and prospect10.1007/s11705-022-2286-4 ↗
13. A dual-function liquid electrolyte additive for high-energy non-aqueous lithium metal batteries10.1038/s41467-022-28959-5 ↗
14. Recent progress on electrolyte additives for stable lithium metal anode10.1016/j.ensm.2020.07.008 ↗
15. Fire-extinguishing, recyclable liquefied gas electrolytes for temperature-resilient lithium-metal batteries10.1038/s41560-022-01051-4 ↗
16. Rational solvent molecule tuning for high-performance lithium metal battery electrolytes10.1038/s41560-021-00962-y ↗
17. A monofluoride ether-based electrolyte solution for fast-charging and low-temperature non-aqueous lithium metal batteries10.1038/s41467-023-36793-6 ↗
18. A new class of ionically conducting fluorinated ether electrolytes with high electrochemical stability10.1021/jacs.9b11056 ↗
19. Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries10.1038/s41560-020-0634-5 ↗
20. Understanding and applying coulombic efficiency in lithium metal batteries10.1038/s41560-020-0648-z ↗
21. Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes10.1038/s41560-021-00910-w ↗
22. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
23. Effects of carbonate solvents and lithium salts on morphology and coulombic efficiency of lithium electrode10.1149/2.100310jes ↗
24. A highly reversible lithium metal anode10.1038/srep03815 ↗
25. Strategies towards enabling lithium metal in batteries: interphases and electrodes10.1039/D1EE00767J ↗
26. All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents10.1038/s41560-019-0474-3 ↗
27. Stable cycling of high-voltage lithium metal batteries in ether electrolytes10.1038/s41560-018-0199-8 ↗
28. Oxidative-stability enhancement and charge transport mechanism in glyme–lithium salt equimolar complexes10.1021/ja203983r ↗
29. Review—in situ polymerization for integration and interfacial protection towards solid state lithium batteries10.1149/1945-7111/ab76a4 ↗
30. Pathway of in situ polymerization of 1,3-dioxolane in LiPF6 electrolyte on Li metal anode
31. Liquid electrolyte based on lithium bis-fluorosulfonyl imide salt: aluminum corrosion studies and lithium ion battery investigations10.1016/j.jpowsour.2008.08.077 ↗
32. Comparative study on lithium borates as corrosion inhibitors of aluminum current collector in lithium bis(fluorosulfonyl)imide electrolytes10.1016/j.jpowsour.2015.07.052 ↗
33. Unveiling the critical role of ion coordination configuration of ether electrolytes for high voltage lithium metal batteries
34. Regulating the electrolyte solvation structure by weakening the solvating power of solvents for stable lithium metal batteries10.1007/s11426-023-1730-x ↗
35. Red-shifted and improper blue-shifted hydrogen bonds in dimethyl ether (DME)n (n=1–4) and hydrated (DME)n (n=1–4) clusters. A theoretical study10.1016/j.molstruc.2004.08.015 ↗
36. Development of direct fluorination technology for application to materials for lithium battery10.1016/S0022-1139(02)00317-2 ↗
37. Relative permittivity of the mixtures (dimethyl or diethyl carbonate) + n-nonane from T=288.15 K to T=308.15 K10.1016/S0021-9614(02)00260-4 ↗
38. Density and viscosity measurements of dimethoxymethane and 1,2-dimethoxyethane from 243 K to 373 K up to 20 MPa10.1007/s10765-008-0503-0 ↗
39. Wohlfarth · 2015 · 76
40. Towards high throughput screening of electrochemical stability of battery electrolytes10.1088/0957-4484/26/35/354003 ↗
41. Theoretical studies to understand surface chemistry on carbon anodes for lithium-ion batteries: reduction mechanisms of ethylene carbonate10.1021/ja0164529 ↗
42. Zhao · Theor. Chem. Acc. · 2008 · 120 · 21510.1007/s00214-007-0310-x ↗
43. Theoretical studies to understand surface chemistry on carbon anodes for lithium-ion batteries: reduction mechanisms of ethylene carbonate10.1021/ja0164529 ↗
44. FEC additive for improved SEI film and electrochemical performance of the lithium primary battery10.3390/en14227467 ↗
45. The influence of FEC on the solvation structure and reduction reaction of LiPF6/EC electrolytes and its implication for solid electrolyte interphase formation10.1016/j.nanoen.2019.103881 ↗
46. Understanding solid electrolyte interface formation on graphite and silicon anodes in lithium-ion batteries: exploring the role of fluoroethylene carbonate10.1016/j.elecom.2024.107708 ↗
47. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries10.1038/s41560-021-00852-3 ↗
48. Charge transfer processes in the course of metal-ion electrochemical intercalation10.1016/j.coelec.2019.10.006 ↗
49. Recent progress in understanding solid electrolyte interphase on lithium metal anodes10.1002/aenm.202003092 ↗
50. The intrinsic behavior of lithium fluoride in solid electrolyte interphases on lithium10.1073/pnas.1911017116 ↗
51. Internally referenced DOSY-NMR: a novel analytical method in revealing the solution structure of lithium-ion battery electrolytes10.1021/acs.jpclett.8b01359 ↗
52. Density‐functional thermochemistry. I. The effect of the exchange‐only gradient correction10.1063/1.462066 ↗
53. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
54. Accurate spin-dependent electron liquid correlation energies for local spin density calculations: a critical analysis10.1139/p80-159 ↗
55. Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields10.1021/j100096a001 ↗
56. A generally applicable atomic-charge dependent London dispersion correction10.1063/1.5090222 ↗
57. Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn:Design and assessment of accuracy10.1039/b508541a ↗
58. Property-optimized Gaussian basis sets for molecular response calculations10.1063/1.3484283 ↗
59. Minimally augmented Karlsruhe basis sets10.1007/s00214-010-0846-z ↗
60. Accurate Coulomb-fitting basis sets for H to Rn10.1039/b515623h ↗
61. Automatic generation of auxiliary basis sets10.1021/acs.jctc.6b01041 ↗
62. Software update: the ORCA program system—version 5.010.1002/wcms.1606 ↗
63. Design of density functionals by combining the method of constraint satisfaction with parametrization for thermochemistry, thermochemical kinetics, and noncovalent interactions10.1021/ct0502763 ↗
64. Extension of the “cheap” composite approach to noncovalent interactions: the jun-ChS scheme10.1021/acs.jctc.9b01037 ↗
65. Gaussian 16, Revision A.03, M. J. Frisch, G. W. Trucks, H. B. Schlegel, G. E. Scuseria, M. A. Robb, J. R. Cheeseman, G. Scalmani, V. Barone, G. A. Petersson, H. Nakatsuji, X. Li, M. Caricato, A. V. Marenich, J. Bloino, B. G. Janesko, R. Gomperts, B. Mennucci, H. P. Hratchian, J. V. Ortiz, A. F. Izmaylov, J. L. Sonnenberg, D. Williams-Young, F. Ding, F. Lipparini, F. Egidi, J. Goings, B. Peng, A. Petrone, T. Henderson, D. Ranasinghe, V. G. Zakrzewski, J. Gao, N. Rega, G. Zheng, W. Liang, M. Hada, M. Ehara, K. Toyota, R. Fukuda, J. Hasegawa, M. Ishida, T. Nakajima, Y. Honda, O. Kitao, H. Nakai, T. Vreven, K. Throssell, J. A. Montgomery, Jr., J. E. Peralta, F. Ogliaro, M. J. Bearpark, J. J. Heyd, E. N. Brothers, K. N. Kudin, V. N. Staroverov, T. A. Keith, R. Kobayashi, J. Normand, K. Raghavachari, A. P. Rendell, J. C. Burant, S. S. Iyengar, J. Tomasi, M. Cossi, J. M. Millam, M. Klene, C. Adamo, R. Cammi, J. W. Ochterski, R. L. Martin, K. Morokuma, O. Farkas, J. B. Foresman, and D. J. Fox, Gaussian, Inc., Wallingford CT, 2016..
66. Löwdin population analysis with and without rotational invariance10.1002/qua.20981 ↗
67. Determining atom-centered monopoles from molecular electrostatic potentials. The need for high sampling density in formamide conformational analysis10.1002/jcc.540110311 ↗
68. Oxidative stability and initial decomposition reactions of carbonate, sulfone, and alkyl phosphate-based electrolytes10.1021/jp400527c ↗