A CFD model for analyzing multiphysics coupling and efficiency optimization in a PEMEC
Source abstract
Abstract
Proton exchange membrane electrolysis cell (PEMEC) is a promising hydrogen energy storage technology, which is very suitable for energy scheduling in microgrids. The multiple physical fields inside it are affected by many factors and form complex coupling states. In electrolysis, this complexity manifests as uneven distribution of temperature, current density, and liquid water volume fraction, which can lead to local hot spots, reactant starvation, and performance degradation. These challenges pose a threat to PEMEC`s service life and operational safety in microgrid systems. Although several studies have explored their Computational Fluid Dynamics (CFD) modeling, the effects of certain operating parameters on their performance are unclear, and few studies have effectively evaluated energy efficiency, which is key to optimizing the operating conditions of the PEMEC system. Therefore, this study is employing a 2D (two dimensional) multiphysics model to investigate the electrochemical processes within PEMEC. The model`s validity is being confirmed through comparison with electrochemical experimental data. Subsequently, the effects of applied voltage, anode inlet flow rate, and cathode inlet flow rate on the multiphysics are being examined, and trends in efficiency changes are being analyzed. Moreover, by optimizing operational conditions, maximum energy efficiency (79.0 %) can be achieved. This study is laying the groundwork for future investigations into control strategies and multi-objective optimization, and promoting the application of PEMEC in energy scheduling.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane Separation Technologies · Spacecraft and Cryogenic Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Bubble evolution and transport in PEM water electrolysis: mechanism, impact, and management10.1016/j.pecs.2023.101075 ↗
2. Wettability and wettability modification methods of porous transport layer in polymer electrolyte membrane electrolysis cells (PEMEC): a review10.1016/j.ijhydene.2023.03.409 ↗
3. Effect of porous transport layer parameters on the proton exchange membrane electrolyzer performance10.1016/j.cplett.2023.140570 ↗
4. A comprehensive review on hybrid power system for PEMFC-HEV: issues and strategies10.1016/j.enconman.2018.06.065 ↗
5. Control and control-oriented modeling of PEM water electrolyzers: a review10.1016/j.ijhydene.2023.04.204 ↗
6. Electrochemical performance study of proton exchange membrane electrolyzer considering the effect of bubble coverage10.1016/j.ijhydene.2023.03.247 ↗
7. Response behaviour of proton exchange membrane water electrolysis to hydrogen production under dynamic conditions10.1016/j.ijhydene.2023.04.223 ↗
8. A gas distributor design for proton‐exchange‐membrane fuel cells10.1149/1.1836666 ↗
9. Effects of flow channel geometry on cell performance for PEM fuel cells with parallel and interdigitated flow fields10.1016/j.electacta.2008.02.095 ↗
10. Water balance simulations of a polymer-electrolyte membrane fuel cell using a two-fluid model10.1016/j.jpowsour.2011.03.068 ↗
11. Experimental study on the performance of PEM fuel cells with interdigitated flow channels10.1016/j.jpowsour.2006.01.063 ↗
12. Hydrogen production in a proton exchange membrane electrolysis cell (PEMEC) with titanium meshes as flow distributors10.1016/j.ijhydene.2023.06.052 ↗
13. Multi-objective optimization of channel structure for a proton exchange membrane water electrolysis cell10.1016/j.ijhydene.2023.08.026 ↗
14. Numerical investigation of PEM electrolysis cell with the new interdigitated-jet hole flow field10.1016/j.ijhydene.2022.07.229 ↗
15. The relationship between chemical structure of perfluorinated sulfonic acid ionomers and their membrane properties for PEMEC application10.1016/j.ijhydene.2023.09.131 ↗
16. Multi-objective optimization design and sensitivity analysis of proton exchange membrane electrolytic cell10.1016/j.jclepro.2023.140045 ↗
17. Parametric study to optimize proton exchange membrane electrolyzer cells10.1016/j.apenergy.2022.118928 ↗
18. Enhanced oxygen discharge with structured mesh channel in proton exchange membrane electrolysis cell10.1016/j.apenergy.2022.119651 ↗
19. Relationship of local current and two-phase flow in proton exchange membrane electrolyzer cells10.1016/j.jpowsour.2022.231742 ↗
20. A component-level model of polymer electrolyte membrane electrolysis cells for hydrogen production10.1016/j.apenergy.2022.119398 ↗
21. Experimental study of the effect of mechanical vibration and water velocity on bubble management in PEM electrolysis cell10.1016/j.ijhydene.2023.08.063 ↗
22. Simulation of proton exchange membrane electrolyzer: influence of bubble covering10.1016/j.ijhydene.2022.04.154 ↗
23. Thermodynamic performance study of hydrogen–oxygen combined cycle with high-pressure proton exchange membrane electrolysis cell for hydrogen energy storage10.1016/j.enconman.2022.116019 ↗
24. Analysis of water transport in a high pressure PEM electrolyzer10.1016/j.ijhydene.2010.02.130 ↗
25. Optimization of power allocation for the multi-stack PEMEC system considering energy efficiency and degradation10.1016/j.ijhydene.2023.11.241 ↗
26. A simple model for solid polymer electrolyte (SPE) water electrolysis10.1016/j.ssi.2004.01.076 ↗
27. Modelling and simulation of a proton exchange membrane (PEM) electrolyser cell10.1016/j.ijhydene.2015.07.129 ↗
28. Prediction of dry-wet-dry transition in polymer electrolyte fuel cells10.1149/1.2429036 ↗
29. Energy and exergy analysis of a proton exchange membrane water electrolysis system without additional internal cooling10.1016/j.renene.2021.09.037 ↗
30. A semiempirical study of the temperature dependence of the anode charge transfer coefficient of a 6kW PEM electrolyzer10.1016/j.ijhydene.2008.06.006 ↗
31. Semiempirical model for determining PEM electrolyzer stack characteristics10.1115/1.2174072 ↗
32. Semiempirical model based on thermodynamic principles for determining 6kW proton exchange membrane electrolyzer stack characteristics10.1016/j.jpowsour.2008.08.054 ↗
33. Health management for PEMFC system long-term operation based on optimal temperature trajectory real-time optimization
34. Online diagnosis method of water management faults based on hybrid-frequency electrochemical impedance spectroscopy for PEMFC
35. Optimization of porous current collectors for PEM water electrolysers10.1016/j.ijhydene.2008.11.056 ↗
36. Modeling of two-phase transport in proton exchange membrane electrolyzer cells for hydrogen energy10.1016/j.ijhydene.2016.12.103 ↗
37. Two-dimensional model of low-pressure PEM electrolyser: two-phase flow regime, electrochemical modelling and experimental validation10.1016/j.ijhydene.2017.08.211 ↗
38. Two-dimensional model of low-pressure PEM electrolyser: two-phase flow regime, electrochemical modelling and experimental validation10.1016/j.ijhydene.2017.08.211 ↗
39. A comprehensive modeling method for proton exchange membrane electrolyzer development10.1016/j.ijhydene.2021.02.170 ↗
40. A comprehensive modeling method for proton exchange membrane electrolyzer development10.1016/j.ijhydene.2021.02.170 ↗
41. Simulation and experiment of heat and mass transfer in a proton exchange membrane electrolysis cell10.1016/j.ijhydene.2020.02.102 ↗
42. Comparison of electrical energy efficiency of atmospheric and high-pressure electrolysers10.1016/j.ijhydene.2006.01.018 ↗