Multiple-functional LiTi2(PO4)3 modification improving long-term performances of Li-rich Mn-based cathode material for advanced lithium-ion batteries
Source abstract
Abstract
Li-rich layered oxides with high energy densities have become one kind of promising cathode for advanced lithium-ion batteries, however some issues are severely hindering their practical applications. To address these challenges, fast ion conductive LiTi 2(PO 4) 3 (LTPO) is employed to modify the typical Li-rich cathode Li 1 · 2Mn 0 · 56Ni 0 · 17Co 0 · 07O 2 (LMNCO) via a sol-gel process combined with a two-step annealing treatment in this work. Serving as a physical separator, LTPO coating effectively depresses the side reactions at cathode-electrolyte interface and the transition-metal dissolution from LMNCO active material under harsh electrochemical environment. Meanwhile, LTPO layer with high ion conductivity could facilitate the interfacial Li + diffusion during charge/discharge process. In addition, partial Ti 4+ ions doped into LMNCO effectively elevate the oxygen electronegativity and restrain the excessive oxidization of lattice oxygen, thus stabilizing the crystal structure and alleviating the stress-strain propagation upon cycling. Electrochemical characterization results demonstrate that the LTPO-modified LMNCO cathode exhibits a superior capacity retention of 86.5 % after 400 cycles at room temperature and that of 73.7 % even under an elevated temperature of 45 °C after 250 cycles under 1C. This study provides a facile strategy for the surface modification of Li-rich layered-structure oxides, which also sheds light in enhancing electrochemical performances for various cathode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Ten years left to redesign lithium ion batteries10.1038/d41586-018-05752-3 ↗
2. Commercialization of lithium battery technologies for electric vehicles10.1002/aenm.201900161 ↗
3. Advances in the cathode materials for lithium rechargeable batteries10.1002/anie.201902359 ↗
4. Design principles for zero-strain Li-ion cathodes10.1016/j.joule.2022.05.018 ↗
5. Nanocomposite engineering of a high‐capacity partially ordered cathode for Li‐ion Batteries
6. Oxygen hole formation controls stability in LiNiO2 cathodes10.1016/j.joule.2023.06.017 ↗
7. LixCoO2 (0<x≤1): A new cathode material for batteries of high energy density10.1016/0167-2738(81)90077-1 ↗
8. Long-life regenerated LiFePO4 from spent cathode by elevating the d-band center of Fe
9. Correlation between manganese dissolution and dynamic phase stability in spinel-based lithium-ion battery
10. Hard carbon anodes for next‐generation Li‐ion batteries: review and perspective10.1002/aenm.202101650 ↗
11. Constructing “Li-rich Ni-rich” oxide cathodes for high-energy-density Li-ion batteries10.1039/D2EE03969A ↗
12. Lithium- and manganese-rich oxide cathode materials for high-energy lithium ion batteries10.1002/aenm.201600906 ↗
13. Insights into Li‐rich Mn‐based cathode materials with high capacity: from dimension to lattice to atom
14. Review on comprehending and enhancing the initial coulombic efficiency of Li-rich Mn-based cathode materials in lithium-ion batteries10.1039/D3QM00064H ↗
15. Improving the long-term electrochemical performances of Li-rich cathode material by encapsulating a three-in-one nanolayer10.1039/D2NR04074C ↗
16. Reducing capacity and voltage decay of Co‐free Li1.2Ni0.2Mn0.6O2 as positive electrode material for lithium batteries employing an ionic liquid‐based electrolyte
17. From liquid to solid‐state batteries: Li‐rich Mn‐based layered oxides as emerging cathodes with high energy density
18. Cation disordered anti‐perovskite cathode materials with enhanced lithium diffusion and suppressed phase transition10.1002/aenm.202300695 ↗
19. Molten salt‐assisted synthesis of single‐crystalline nonstoichiometric Li1+xNi1–xO2 with improved structural stability10.1002/aenm.202300407 ↗
20. A mechanistic insight into the oxygen redox of Li‐rich layered cathodes and their related electronic/atomic behaviors upon cycling10.1002/adma.202211965 ↗
21. Lattice oxygen redox reversibility modulation in enhancing the cycling stability of Li‐rich cathode materials
22. Challenges and recent advances in high capacity Li‐rich cathode mmaterials for high energy density lithium‐ion batteries
23. Enhanced microstructure stability of LiNi0.8Co0.1Mn0.1O2 cathode with negative thermal expansion shell for long-life battery10.1016/j.jcis.2023.03.032 ↗
24. The mechanism of fluorine doping for the enhanced lithium storage behavior in cation‐disordered cathode oxide10.1002/aenm.202301636 ↗
25. Compositionally complex doping for zero-strain zero-cobalt layered cathodes10.1038/s41586-022-05115-z ↗
26. Restraining oxygen release and suppressing structure distortion in single‐crystal Li‐rich layered cathode materials
27. Improvement of stability and capacity of Co-free, Li-rich layered oxide Li1.2Ni0.2Mn0.6O2 cathode material through defect control10.1016/j.jcis.2022.10.105 ↗
28. Enabling an intrinsically safe and high‐energy‐density 4.5 V‐class lithium‐ion battery with synergistically incorporated fast ion conductors
29. Suppressing bulk strain and surface O2 Release in Li‐rich cathodes by just tuning the Li content10.1002/adma.202307617 ↗
30. Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques10.1039/D0EE01694B ↗
31. Voltage decay of Li‐rich layered oxides: mechanism, modification strategies, and perspectives
32. Regulating robust interphase using a functional ionic liquid additive with bi-electrode affinity to stabilize the high-voltage lithium-rich lithium metals batteries10.1016/j.cej.2023.142578 ↗
33. Restraining migration and dissolution of transition-metal-ions via functionalized separator for Li-rich Mn-based cathode with high-energy-density10.1016/j.jechem.2023.05.004 ↗
34. Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell10.1016/j.nanoen.2021.105775 ↗
35. Surface coupling between mechanical and electric fields empowering Ni‐rich cathodes with superior cyclabilities for lithium‐ion batteries10.1002/advs.202200622 ↗
36. In-situ surface chemical and structural self-reconstruction strategy enables high performance of Li-rich cathode10.1016/j.nanoen.2020.105459 ↗
37. Understanding the influence of Mg doping for the stabilization of capacity and higher discharge voltage of Li- and Mn-rich cathodes for Li-ion batteries10.1039/C6CP07383B ↗
38. Impacts of Mg doping on the structural properties and degradation mechanisms of a Li and Mn rich layered oxide cathode for lithium-ion batteries10.1038/s41598-023-31492-0 ↗
39. Regulating anionic redox activity of lithium-rich layered oxides via LiNbO3 integrated modification10.1016/j.nanoen.2022.107555 ↗
40. Enabling ultrastable Co-free Li-rich oxides via TbF3 treatment10.1021/acsami.4c00909 ↗
41. High capacity double-layer surface modified Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode with improved rate capability10.1039/b823506f ↗
42. Ammonia treatment of 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2 material: insights from solid-state NMR analysis10.1021/acs.jpcc.7b12269 ↗
43. Polyaniline modification and performance enhancement of lithium-rich cathode material based on layered-spinel hybrid structure10.1016/j.jpowsour.2015.05.058 ↗
44. Influence of surface modification of layered cathode materials LiNixMnyCozO2 by NASICON structure nanoparticles on their electrochemical characteristics10.1007/s11237-024-09791-y ↗
45. Enhancing high-voltage performance of Ni-rich cathode by surface modification of self-assembled NASICON fast ionic conductor LiZr2(PO4)310.1021/acsami.9b00389 ↗
46. Surface modification of the LiNi0.5Co0.2Mn0.3O2 cathode by a protective interface layer of Li1.3Ti1.7Al0.3(PO4)310.1149/2.0701908jes ↗
47. Enhanced electrochemical performance of Ni-rich cathode materials with Li1.3Al0.3Ti1.7(PO4)3 coating10.1021/acssuschemeng.9b05539 ↗
48. An efective modifcation of LiNi0.6CO0.2Mn0.2O2 with Li1.3Al0.3Ti1.7(PO4)3 as a high-performance cathode material for Li-ion batteries10.1007/s10800-022-01736-4 ↗
49. Utilizing fast ion conductor for single-crystal Ni-rich cathodes to achieve dual-functional modification of conductor network constructing and near-surface doping
50. Regulation of interfacial lattice oxygen activity by full‐surface modification engineering towards long cycling stability for Co‐free Li‐rich Mn‐based cathode
51. Doping‐induced electronic/ionic engineering to optimize the redox kinetics for potassium storage: a case study of Ni‐doped CoSe210.1002/advs.202200341 ↗
52. Regulation of surface oxygen activity in Li-rich layered cathodes using band alignment of vanadium phosphate surface coatings10.1039/D2TA05606B ↗
53. Improving high-temperature performance of lithium-rich cathode by roll-to-roll atomic layer deposition of titania nanocoating for lithium-ion batteries10.1016/j.est.2021.103348 ↗
54. A simple gas-solid treatment for surface modification of Li-rich oxides cathodes10.1002/anie.202107955 ↗
55. In situ construction of gradient oxygen release buffer and interface cation self‐accelerator stabilizing high‐voltage Ni‐rich cathode10.1002/adfm.202206428 ↗
56. Modulating the surface ligand orientation for stabilized anionic redox in Li‐rich oxide cathodes
57. Engineering of oxygen vacancy and electric‐field effect by encapsulating lithium titanate in reduced graphene oxide for superior lithium ion storage10.1002/smtd.201900185 ↗
58. Enhancing cell performance of lithium-rich manganese-based materials via tailoring crystalline states of a coating layer10.1021/acsami.1c11180 ↗
59. Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries10.1038/s41560-021-00776-y ↗
60. Al doping for mitigating the capacity dading and voltage decay of layered Li and Mn-rich cathodes for Li-ion batteries10.1002/aenm.201502398 ↗
61. An artificially tailored functional layer on Li-rich layer cathodes enables a stable high-temperature interphase for Li-ion batteries10.1039/D2TA07316A ↗
62. Diffusion-induced stress optimization by boosted surface Li-concentration for single-crystal Ni-rich layered cathodes10.1016/j.mattod.2022.10.021 ↗
63. Evolution and expansion of Li concentration gradient during charge-discharge cycling10.1038/s41467-021-24120-w ↗
64. Phosphorylation of Li-rich Mn-based layered oxides for anion redox and structural stability10.1021/acsami.2c17534 ↗
65. Ti-based surface integrated layer and bulk doping for stable voltage and long life of Li-rich layered cathodes10.1002/adfm.202009310 ↗
66. Building homogenous Li2TiO3 coating layer on primary particles to stabilize Li‐rich Mn‐based cathode materials