journal article·2024-08Open access

Pore-scale investigation of water-gas transport in reconstructed gas diffusion layers with binder and polytetrafluoroethylene coating

Min Li, Jiang Liu, Philipp Nachtigal, Dajan Mimic

Abstract

The microstructure of the gas diffusion layer (GDL) influences the fuel cell performance significantly. A deeper understanding of the transport processes within the GDL is crucial for its optimisation. In this study, a porous microstructure of the gas diffusion layer is reconstructed stochastically, and the impact of the anisotropy parameter on transport properties is examined and determined by comparing it to experimental data. Subsequently, a series of GDLs with different binder and polytetrafluoroethylene (PTFE) volume fractions are reconstructed. A pore-scale model (PSM) simulation is employed to compute the anisotropic transport properties of the reconstructed model. The PSM result indicates that, as the binder and PTFE percentages increase, the in-plane and through-plane diffusivities decrease, while the electrical and thermal conductivities show non-monotonic evolution. The water distribution and the invasion process of liquid water into the reconstructed GDL is investigated using the multiple-relaxation-time lattice Boltzmann method (LBM). The result demonstrates the effect of binder and PTFE, on water penetration in the GDL with constant and reduced porosity. Furthermore, the optimal volume fractions of binder and PTFE are determined based on the PSM and LBM results. This comprehensive analysis contributes to a better understanding of the interplay between microstructure, transport properties, and water behaviour in GDLs, offering insights for optimisation of mass transport and water management of fuel cells.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane Separation and Gas Transport · Membrane Separation Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. State of health of proton exchange membrane fuel cell in aeronautic applications10.1016/j.jpowsour.2020.227779 ↗
2. Potential and technical challenges of on-board hydrogen storage technologies coupled with fuel cell systems for aircraft electrification10.1016/j.jpowsour.2022.232397 ↗
3. Water flooding in the proton exchange membrane fuel cell
4. Effect of PEM fuel cell exhaust water conductivity on catalyst degradation using thermal degradation resistant polymer membranes10.1016/j.ijhydene.2019.11.232 ↗
5. Water management characteristics of electrospun micro-porous layer in PEMFC under normal temperature and cold start conditions10.1016/j.ijhydene.2020.05.271 ↗
6. Water transport characteristics of a PEM fuel cell at various operating pressures and temperatures10.1016/j.ijhydene.2012.12.076 ↗
7. Investigation of water transport in fuel cells using water transport plates and solid plates10.1039/C7RA11806F ↗
8. Water and thermal management for Ballard PEM fuel cell stack10.1016/j.jpowsour.2005.01.030 ↗
9. Fuel cell humidity modeling and control using cathode internal water content10.1016/j.ijhydene.2020.04.283 ↗
10. An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow10.1016/j.jpowsour.2008.11.078 ↗
11. Probing water distribution in compressed fuel-cell gas-diffusion layers using X-ray computed tomography10.1016/j.elecom.2015.02.005 ↗
12. Modelling water intrusion and oxygen diffusion in a reconstructed microporous layer of PEM fuel cells10.1016/j.ijhydene.2014.08.027 ↗
13. A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells10.1016/j.jpowsour.2009.12.123 ↗
14. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
15. A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells10.1016/j.ijhydene.2009.09.017 ↗
16. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
17. Effects of flow field design on water management and reactant distribution in PEMFC: a review10.1007/s11581-016-1644-y ↗
18. A review on water fault diagnosis of PEMFC associated with the pressure drop10.1016/j.apenergy.2016.04.064 ↗
19. Wang · 2009
20. Review on water management methods for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.06.211 ↗
21. A review of physics-based low-temperature proton-exchange membrane fuel cell models for system-level water and thermal management studies10.1016/j.jpowsour.2022.232585 ↗
22. The interactive effect of heat and mass transport on water condensation in the gas diffusion layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2020.229121 ↗
23. Multi-scale structural analysis of gas diffusion layers10.1016/j.jpowsour.2017.03.086 ↗
24. A two-dimensional two-phase model of a PEM fuel cell10.1149/1.2142267 ↗
25. Effects of inhomogeneous gas diffusion layer properties on the transportation phenomenon and performances of proton-exchange membrane fuel cells10.1021/acsomega.3c08756 ↗
26. Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells10.1016/j.rser.2016.11.235 ↗
27. Stochastic modeling of polymer electrolyte membrane fuel cell gas diffusion layers – Part 1: physical characterization10.1016/j.ijhydene.2017.04.268 ↗
28. Pore-scale imaging and modelling10.1016/j.advwatres.2012.03.003 ↗
29. Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs10.1016/j.jpowsour.2012.11.006 ↗
30. Implications of polymer electrolyte fuel cell exposure to synchrotron radiation on gas diffusion layer water distribution10.1016/j.jpowsour.2013.07.025 ↗
31. A new three-dimensional modeling technique for studying porous media10.1016/0021-9797(84)90481-8 ↗
32. Microstructure reconstruction of the gas diffusion layer and analyses of the anisotropic transport properties10.1016/j.enconman.2021.114293 ↗
33. Stochastically modeled gas diffusion layers: effects of binder and polytetrafluoroethylene on effective gas diffusivity
34. Stochastic microstructure reconstruction of a binder/carbon fiber/expanded graphite carbon fiber paper for PEMFCs applications: mass transport and conductivity properties10.1149/2.0331907jes ↗
35. Stochastic microstructural modeling of fuel cell gas diffusion layers and numerical determination of transport properties in different liquid water saturation levels10.1016/j.jpowsour.2015.11.005 ↗
36. Microscale characterisation of stochastically reconstructed carbon fiber-based Gas Diffusion Layers; effects of anisotropy and resin content10.1016/j.jpowsour.2016.04.096 ↗
37. CFD simulation of flow through the reconstructed microstructure of fibrous gas diffusion layer in a polymer electrolyte membrane fuel cell
38. Lattice Boltzmann simulation of liquid water transport in gas diffusion layers of proton exchange membrane fuel cells: parametric studies on capillary hysteresis10.1016/j.jpowsour.2022.231381 ↗
39. Lattice Boltzmann simulation of the structural degradation of a gas diffusion layer for a proton exchange membrane fuel cell10.1016/j.jpowsour.2022.232452 ↗
40. Effect of channel-rib width on water transport behavior in gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.03.079 ↗
41. Evaluation of porosity and thickness on effective diffusivity in gas diffusion layer10.1016/j.jpowsour.2016.12.052 ↗
42. Effect of gas diffusion layer thickness on liquid water transport characteristics in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2020.228578 ↗
43. Multiscale stochastic modeling of microporous layers and bi-layer gas diffusion media for polymer electrolyte fuel cells10.1016/j.jpowsour.2023.233476 ↗
44. The effects of gas diffusion layers structure on water transportation using X-ray computed tomography based Lattice Boltzmann method10.1016/j.jpowsour.2017.12.016 ↗
45. Multiscale modeling of an angled gas diffusion layer for polymer electrolyte membrane fuel cells: performance enhancing for aviation applications10.1016/j.ijhydene.2021.03.166 ↗
46. Predicting the topological and transport properties in porous transport layers for water electrolyzers10.1021/acsami.3c12345 ↗
47. Pore scale simulation of transport and electrochemical reactions in reconstructed PEMFC catalyst layers10.1149/1.3478207 ↗
48. Mesoscopic modeling and characterization of the porous electrodes for vanadium redox flow batteries10.1016/j.est.2020.101782 ↗
49. Krueger · 2016
50. Tailored porous transport layers for optimal oxygen transport in water electrolyzers: combined stochastic reconstruction and lattice Boltzmann method10.1002/cphc.202300197 ↗
51. Open circuit voltage of vanadium redox flow batteries: discrepancy between models and experiments10.1016/j.elecom.2011.01.020 ↗
52. Multiple-relaxation-time lattice Boltzmann models in three dimensions10.1098/rsta.2001.0955 ↗
53. Pore-scale modeling of gas diffusion layers: effects of compression on transport properties
54. Design of acoustic trim based on geometric modeling and flow simulation for non-woven10.1016/j.commatsci.2006.01.018 ↗
55. 3D phase-differentiated GDL microstructure generation with binder and PTFE distributions10.1016/j.ijhydene.2011.12.050 ↗
56. Tayarani · 2021
57. Using an ILU/deflation preconditioner for simulation of a PEM fuel cell cathode catalyst layer10.4208/cicp.180412.301012a ↗
58. Investigating the validity of the Bosanquet formula for estimation of diffusivities in mesopores10.1016/j.ces.2011.11.026 ↗
59. Pore-scale flow and mass transport in gas diffusion layer of proton exchange membrane fuel cell with interdigitated flow fields10.1016/j.ijthermalsci.2011.08.003 ↗
60. The impact of sample size on transport properties of carbon-paper and carbon-cloth GDLs: direct simulation using the lattice Boltzmann model10.1016/j.ijheatmasstransfer.2017.11.003 ↗
61. Permeability prediction of numerical reconstructed multiscale tight porous media using the representative elementary volume scale lattice Boltzmann method10.1016/j.ijheatmasstransfer.2017.11.004 ↗
62. An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model10.1016/j.jpowsour.2007.05.081 ↗
63. Multiphase and pore scale modeling on catalyst layer of high-temperature polymer electrolyte membrane fuel cell10.1149/1945-7111/abff03 ↗
64. Fuel Cell Store. Toray Carbon Fiber Paper "TGP-H"..
65. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
66. Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials10.1016/j.jpowsour.2006.06.092 ↗
67. Estimating effective thermal conductivity in carbon paper diffusion media10.1016/j.ces.2010.03.047 ↗
68. A novel approach to determine the in-plane thermal conductivity of gas diffusion layers in proton exchange membrane fuel cells10.1016/j.jpowsour.2010.11.151 ↗
69. Effect of binder and compression on the transport parameters of a multilayer gas diffusion layer10.1021/acs.energyfuels.1c01598 ↗
70. Coating distribution analysis on gas diffusion layers for polymer electrolyte fuel cells by neutron and X-ray high-resolution tomography10.1021/acsomega.9b01763 ↗
71. Effect of the PTFE content in the gas diffusion layer on water transport in polymer electrolyte fuel cells (PEFCs)10.1016/j.jpowsour.2013.06.138 ↗