journal article·2024-08

Plasma treatment of nafion membranes: Understanding the trade-off between surface modification and electrochemical degradation

Rafael Barbosa, Roger Gonçalves, Guilherme E.O. Blanco, Matheus C. Saccardo, Robert S. Paiva, Valmor R. Mastelaro, Sandra A. Cruz, Carlos H. Scuracchio

Publisher page

Abstract

Nafion is a polymer commonly used in electrochemical devices due to its excellent ionic conductivity. In applications such as proton-exchange membranes for fuel cells (PEMFCs) and ionomeric polymer metal composites (IPMCs), the interfacial properties are critical to device performance. Several studies use plasma treatment to modify the Nafion surface aiming for adhesion improvement through nanoroughness, however, most of them neglect the effects of this treatment on the membrane chemical structure and electrochemical performance. This work comprehensively investigates the Nafion properties, evaluating chemical, morphological, and electrochemical modifications trhough relevant characterization methods. Atomic force (AFM) and scanning electron microscopies (SEM) showed increased nanoroughness with plasma treatment time. Also, Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses showed fluorine and sulfur abstraction, associated with side chain breakage. This effect was prejudicial to the water uptake and decreased the ionic conductivity, measured by Electrochemical Impedance Spectroscopy (EIS), from 140.8 to 1.0 μS cm −1 in the plasma-treated Nafion. Also, an applied electrochemical device was prepared and confirmed the ionic transport reduction using plasma-treated Nafion. This phenomenon is crucial for electrochemical devices, as fewer ionic channels remain on the treated membrane surface reducing water absorption, ionic conductivity, and charge density.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Fuel Cells and Related Materials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Water sorption, desorption and transport in Nafion membranes10.1016/j.memsci.2007.06.022 ↗
2. A unified morphological description of Nafion membranes from SAXS and mesoscale simulations10.1039/c1sm00002k ↗
3. Small-angle X-ray-scattering investigation of submicroscopic porosity with fractal properties10.1103/PhysRevLett.53.596 ↗
4. Nafion stabilized Ag nanopillar arrays as a flexible SERS substrate for trace chemical detection10.1016/j.matchemphys.2020.123291 ↗
5. Nimesulide determination on carbon black-nafion modified glassy carbon electrode by means of adsorptive stripping voltammetry10.1007/s12678-021-00676-5 ↗
6. Adjaoud · Smart Mater. Struct. · 2021 · 3010.1088/1361-665X/ac1e63 ↗
7. Improving electrochemical stability and electromechanical efficiency of ipmcs: tuning ionic liquid concentration10.1007/s10800-022-01776-w ↗
8. Customized patterning of deep nanowell structures in polymer electrolyte membranes for highly enhanced fuel cell performances10.1021/acsaem.2c04163 ↗
9. Preparation of 3D electrode microarrays of multi-walled carbon nanotubes/nafion nanocomposites for microfluidic biofuel cells10.1166/jnn.2014.10116 ↗
10. Advances in ionogels for proton-exchange membranes
11. Mechanically stable thinned membrane for a high-performance polymer electrolyte membrane fuel cell via a plasma-etching and annealing process10.1021/acs.energyfuels.1c01225 ↗
12. Multiscale architectured nafion membrane derived from Lotus leaf for fuel cell applications10.1021/acsami.3c03050 ↗
13. Progress in hybrid composite Nafion®-based membranes for proton exchange fuel cell application10.1016/j.cej.2020.127329 ↗
14. Fabrication of ionic polymer-metal composite actuators with durable and quality-enhanced sputtered electrodes10.1088/1361-6439/ab272c ↗
15. Fabrication of ionic polymer metal composite for bio-actuation application: sputtering and electroless plating methods10.1088/2053-1591/aaf61d ↗
16. Rough interface in IPMC: modeling and its influence analysis10.1088/1361-665X/aaca59 ↗
17. Effects of surface roughening on the mass transport and mechanical properties of ionic polymer-metal composite10.1063/1.4884675 ↗
18. A gradient model for Young's modulus and surface electrode resistance of ionic polymer–metal composite10.1007/s10338-019-00119-1 ↗
19. Rough interface in IPMC: modeling and its influence analysis10.1088/1361-665X/aaca59 ↗
20. Surface modified Nafion® membrane by ion beam bombardment for fuel cell applications10.1016/j.jpowsour.2005.05.040 ↗
21. Electroanalytical sensing of piperazine at carbon nanotubes/nafion composite-modified glassy carbon and screen-printed carbon electrodes in human plasma10.1134/S1061934820020069 ↗
22. Nafion stabilized Ag nanopillar arrays as a flexible SERS substrate for trace chemical detection10.1016/j.matchemphys.2020.123291 ↗
23. Cruz · 2006 · vol. 23 · 100
24. Bonding Nafion® with polydimethysiloxane: a versatile approach towards ion-exchange membrane microfluidic devices10.1016/j.memsci.2017.05.020 ↗
25. Surface modification of poly(tetrafluoroethylene) films via grafting of poly(ethylene glycol) for reduction in protein adsorption10.1163/156856200743634 ↗
26. Performance enhancement of IPMC actuator by plasma surface treatment10.1088/0964-1726/16/1/N02 ↗
27. Effect of bulk and surface treatments on the surface ionic activity of nafion membranes10.1149/1.2781247 ↗
28. Low energy plasma treatment of Nafion® membranes for PEM fuel cells10.1016/j.jpowsour.2006.11.078 ↗
29. Electroactive polymer actuator with high response speed through anisotropic surface roughening by plasma etching10.1166/jnn.2008.1433 ↗
30. Surface modification of nafion membranes using atmospheric‐pressure low‐temperature plasmas for electrochemical applications10.1002/ppap.200700108 ↗
31. Ionic polymer-metal composites (IPMCs) containing Cu/Ni electrodes and ionic liquids for durability
32. Electroactive polymer actuator for lens‐drive unit in auto‐focus compact camera module10.4218/etrij.09.1209.0023 ↗
33. O2 plasma treatment for ionic polymer metal nano composite (IPMNC) actuator10.1016/j.snb.2010.03.038 ↗
34. Optimum condition of anisotropic plasma etching for improving bending properties of ionic polymer-metal composites10.1166/jnn.2010.2240 ↗
35. Electron beam assisted patterning and dry etching of Nafion membranes10.1149/1.3615938 ↗
36. Actuation characteristics of all-organic polymer actuator with conducting polymer electrode10.1007/s13233-013-1067-9 ↗
37. Evaluation of Adhesion between Nafion and gold electrodes fabricated through novel dry process utilizing argon plasma treatment10.1246/cl.130486 ↗
38. Surface activation of perfluorosulfonic acid membrane used in fuel cells with vacuum UV photo-oxidation10.1080/01694243.2012.705525 ↗
39. Smart coating process of proton-exchange membrane for polymer electrolyte fuel cell10.1016/j.apenergy.2012.12.074 ↗
40. Microfabrication of ionic polymer actuators by selective plasma irradiation10.1002/tee.22009 ↗
41. Comparison of plasma treatment and sandblast preprocessing for IPMC actuator
42. Humidity sensor based on the ionic polymer metal composite10.1016/j.snb.2017.03.018 ↗
43. Effect of grafting of poly (styrenesulfonate) onto Nafion membrane on the performance of vanadium redox flow battery10.1016/j.jelechem.2017.11.034 ↗
44. Large-scale fabrication of high-performance ionic polymer–metal composite flexible sensors by in situ plasma etching and magnetron sputtering10.1021/acsomega.8b00877 ↗
45. A salivary glucose biosensor based on immobilization of glucose oxidase in Nafion-carbon nanotubes nanocomposites modified on screen printed electrode10.1016/j.microc.2023.108872 ↗
46. High-performance vertical graphene nanowall/silicon Schottky junction solar cells with Nafion doping and plasma etching10.1016/j.jallcom.2023.168765 ↗
47. Comparison between adhesion properties of adhesive bonding and adhesive-free adhesion for heat-assisted plasma-treated polytetrafluoroethylene (PTFE)10.1080/00218464.2018.1512859 ↗
48. ATR-FTIR study of water in Nafion membrane combined with proton conductivity measurements during hydration/dehydration cycle10.1021/jp112300c ↗
49. Surface characterization of argon-plasma-modified perfluorosulfonic acid membranes10.1021/jp055159i ↗
50. Drastic improvement in adhesion property of polytetrafluoroethylene (PTFE) via heat-assisted plasma treatment using a heater10.1038/s41598-017-09901-y ↗
51. Adhesive-free adhesion between heat-assisted plasma-treated fluoropolymers (PTFE, PFA) and plasma-jet-treated polydimethylsiloxane (PDMS) and its application10.1038/s41598-018-36469-y ↗
52. New molecular scale insights into the α-transition of Nafion® thin films from variable temperature ATR-FTIR spectroscopy10.1039/C6CP04457C ↗
53. Ab initio calculation of the IR spectrum of PTFE: helical symmetry and defects10.1021/jp3102145 ↗
54. Highly oriented pyrolytic graphite by XPS10.1116/1.1247662 ↗
55. Applications of ESCA to polymer chemistry. III. Structures and bonding in homopolymers of ethylene and the fluoroethylenes and determination of the compositions of fluoro copolymers10.1002/pol.1973.170110207 ↗
56. Beamson · 1992 · 295
57. Surface chemical analysis of poly (ε‐caprolactone)–perfluoropolyether–poly (ε‐caprolactone) triblock copolymers by X‐ray photoelectron spectroscopy10.1002/pi.1184 ↗
58. Observation of photovoltaic action from photoacid-modified Nafion due to light-driven ion transport10.1021/jacs.7b00974 ↗
59. X-ray photoelectron spectroscopy investigation on electrochemical degradation of proton exchange 159 Membrane fuel cell electrodes10.1016/j.jpowsour.2015.02.004 ↗
60. XPS studies of radiation grafted PTFE‐g‐polystyrene sulfonic acid membranes10.1002/(SICI)1097-4628(20000418)76:3<336::AID-APP9>3.0.CO;2-E ↗
61. Study of acidity of aerogels ZrO2-SO42− by isopropanol dehydration reaction, surface potential and X-ray photoelectron spectroscopy10.1023/A:1008776520235 ↗
62. Mapping microscale chemical heterogeneity in Nafion membranes with X-ray photoelectron spectroscopy10.1149/2.0771811jes ↗
63. NMR and X-ray diffraction study of the phases of zirconium phosphate incorporated in a composite membrane Nafion®-ZrP10.1016/j.ssi.2012.10.006 ↗
64. Nafion membrane channel structure studied by small-angle X-ray scattering and Monte Carlo simulations10.1016/j.polymer.2018.09.014 ↗
65. Plasma‐polymerised proton conductive membranes for a 160 miniaturised PEMFC10.1002/fuce.200400066 ↗
66. Nafion-based ionomeric polymer/metal composites operating in the air: theoretical and electrochemical analysis10.1007/s10008-020-04520-6 ↗
67. Barbosa · Electrochim. Acta · 2022 · 43510.1016/j.electacta.2022.141341 ↗
68. Novel IP2C sensors with flexible electrodes based on plasma-treated conductive elastomeric nanocomposites10.1088/1361-665X/ad1c50 ↗