High loading electrode with superior electron/ion transport network for high performance lithium-ion batteries
Source abstract
Abstract
High loading electrode design is beneficial to increase the energy density of lithium ion batteries. Two obstacles for the high loading electrode application should be removed, including the limitation on ion/electron transport within high loading electrode and the structure stability. Here, the electron conduction on LiNi 0.8Co 0.1Mn 0.1O 2 cathodes is enhanced with evenly and tightly Ketjen Black coating via high-speed dry mixing, while carbon nanotube is added to enhance the electron conduction between LiNi 0.8Co 0.1Mn 0.1O 2 particles, thus to construct three-dimensional electron migration channel. In addition, the large amount of electrolyte adsorbed by porous Ketjen Black and carbon nanotube enhances the Li + ion diffusivity in this network. As a result, LiNi 0.8Co 0.1Mn 0.1O 2 electrode with only 1 % Ketjen Black and 3 % carbon nanotube can achieve both high electron/Li + ion diffusivity and high parking density (2.2 g cm −3). A thick electrode with an areal mass loading of 20 mg cm −2 shows a high specific capacity of 111.2 mA h g −1 at 4 C and capacity retention rate of 98.2 % after 100 cycles at 2 C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Thick electrode batteries: principles, opportunities, and challenges10.1002/aenm.201901457 ↗
2. Analysis of rate-limiting factors in thick electrodes for electric vehicle applications10.1149/2.0571803jes ↗
3. From fundamental understanding to engineering design of high-performance thick electrodes for scalable energy-storage systems10.1002/adma.202101275 ↗
4. Enhancing role of structurally integrated V2C MXene nanosheets on silicon anode for lithium storage10.1016/j.jallcom.2022.166213 ↗
5. Multiscale understanding and architecture design of high energy/power lithium‐ion battery electrodes
6. Simultaneous enhancement of interfacial stability and kinetics of single-crystal LiNi0.6Mn0.2Co0.2O2 through optimized surface coating and doping10.1021/acs.nanolett.0c03778 ↗
7. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for Li‐ion batteries10.1002/aenm.201801202 ↗
8. Insights into Li‐rich Mn‐based cathode materials with high capacity: from dimension to lattice to atom
9. Design and host-involved in situ fabrication of La4NiLiO8 coating on Ni-rich cathode materials towards superior structural stability10.1039/D0TA09383A ↗
10. In situ artificial hybrid SEI layer enabled high‐performance prelithiated SiOx anode for lithium‐ion batteries10.1002/adfm.202303020 ↗
11. Understanding capacity fading mechanism of thick electrodes for lithium-ion rechargeable batteries10.1016/j.jpowsour.2020.228369 ↗
12. Failure mode of thick cathodes for Li-ion batteries: variation of state-of-charge along the electrode thickness direction10.1016/j.electacta.2021.137743 ↗
13. Designing on solvent composition of dual-salt low concentration electrolyte for inhibiting lithium dendrite growth at −20 °C10.1016/j.electacta.2022.140238 ↗
14. MXene terminating groups O, –F or –OHF or OOH, –F, or OOH, –Cl?10.1016/j.jechem.2022.08.032 ↗
15. Progress in 3D-MXene electrodes for lithium/sodium/potassium/magnesium/zinc/aluminum-ion batteries10.1007/s41918-022-00174-2 ↗
16. A solid‐state battery cathode with a polymer composite electrolyte and low tortuosity microstructure by directional freezing and polymerization
17. Customizing a Li–metal battery that survives practical operating conditions for electric vehicle applications10.1039/C9EE00716D ↗
18. Nano/microstructured silicon-graphite composite anode for high-energy-density Li-ion battery
19. High areal capacity battery electrodes enabled by segregated nanotube networks10.1038/s41560-019-0398-y ↗
20. Highly stable and ultrahigh-rate Li metal anode enabled by fluorinated carbon fibers10.1002/smll.202006002 ↗
21. Enhanced charging capability of lithium metal batteries based on lithium bis(trifluoromethanesulfonyl)imide-lithium bis(oxalato)borate dual-salt electrolytes10.1016/j.jpowsour.2016.04.017 ↗
22. The mechanism of side reaction induced capacity fading of Ni-rich cathode materials for lithium ion batteries10.1016/j.jechem.2020.09.031 ↗
23. Visualization of concentration polarization in thick electrodes10.1016/j.ensm.2022.07.007 ↗
24. Study on aging and external short circuit mechanisms of Li-ion cells with different electrode thicknesses10.1016/j.apenergy.2023.121796 ↗
25. Protein-derived 3D amorphous carbon with N, O doping as high rate and long lifespan anode for potassium ion batteries10.1016/j.jpowsour.2021.230530 ↗
26. Three-dimensional Bi2S3 nanoflowers with built-in MXene nanosheets for reversible lithium-ion storage with enhanced performance and kinetics10.1021/acsaem.4c00025 ↗
27. Conductive cellulose nanofiber enabled thick electrode for compact and flexible energy storage devices10.1002/aenm.201802398 ↗
28. Ultrathin graphite foam: a three-dimensional conductive network for battery electrodes10.1021/nl300528p ↗
29. In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes10.1038/s41467-021-25611-6 ↗
30. 3D interconnected porous carbon derived from spontaneous merging of the nano-sized ZIF-8 polyhedrons for high-mass-loading supercapacitor electrodes10.1039/D1TA09501C ↗
31. Choice for graphene as conductive additive for cathode of lithium-ion batteries10.1016/j.jechem.2018.03.009 ↗
32. Low-Tortuosity thick electrodes with active materials gradient design for enhanced energy storage10.1021/acsnano.2c00129 ↗
33. Tunable porous electrode architectures for enhanced Li-ion storage kinetics in thick electrodes10.1021/acs.nanolett.1c02142 ↗
34. Enhanced homogeneity of electrochemical reaction via low tortuosity enabling high-voltage nickel-rich layered oxide thick-electrode10.1016/j.ensm.2022.01.035 ↗
35. Constructing a highly efficient aligned conductive network to facilitate depolarized high‐areal‐capacity electrodes in Li‐ion batteries10.1002/aenm.202100601 ↗
36. Scalable manufacture of high-performance battery electrodes enabled by a template-free method10.1002/smtd.202100280 ↗
37. High performance thick cathodes enabled by gradient porosity10.1016/j.electacta.2021.138105 ↗
38. Secondary-phase stochastics in lithium-ion battery electrodes10.1021/acsami.7b17771 ↗
39. Extra storage capacity enabled by structural defects in pseudocapacitive NbN monocrystals for high‐energy hybrid supercapacitors
40. Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries10.1016/j.jpowsour.2015.04.081 ↗
41. CNT ink as an electrode additive for an effective hybrid conductive network in silicon microparticle/graphite anodes10.1016/j.electacta.2023.142134 ↗
42. Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes10.1016/j.powtec.2016.04.011 ↗
43. Influence of the carbon black dispersing process on the microstructure and performance of Li‐ion battery cathodes
44. Extrusion‐based processing of cathodes: influence of solid content on suspension and electrode properties
45. Sonication-induced electrostatic assembly of an FeCO3@Ti3C2 nanocomposite for robust lithium storage10.1039/D0TA08456E ↗
46. Antisite defects in sol‐gel‐synthesized LiFePO4 at higher temperature: effect on lithium‐ion diffusion10.1002/celc.201800889 ↗
47. Pseudo‐bonding and electric‐field harmony for Li‐rich Mn‐based oxide cathode10.1002/adfm.202004302 ↗
48. 3D cube‐maze‐like Li‐rich layered cathodes assembled from 2D porous nanosheets for enhanced cycle stability and rate capability of lithium‐ion batteries
49. Overcoming the rate-determining kinetics of the Na3V2O2(PO4)2F cathode for ultrafast sodium storage by heterostructured dual-carbon decoration10.1039/D1TA02250D ↗
50. Synthesis and characterization of lithium bis(fluoromalonato)borate for lithium‐ion battery applications
51. A promising bulky anion based lithium borate salt for lithium metal batteries10.1039/C8SC00041G ↗