journal article·2024-03Open access

Direct reuse of graphite and lithium nickel manganese cobalt oxide (NMC) recovered from ultrafast-laser ablation debris in Li-ion battery electrodes

Ryan J. Tancin, Bertan Özdoğru, Nikita S. Dutta, Donal P. Finegan, Bertrand J. Tremolet de Villers

Abstract

We demonstrate that debris collected from the ultrafast-laser ablation of graphite anodes can be directly reused in a lithium-ion battery with little to no negative effects on electrochemical performance. Further, we show that while post-ablation NMC (LiNi 0.33Mn 0.33Co 0.33O 2 ) cathode debris will require additional processing before being incorporated into an electrode, its critical materials (nickel, manganese, and cobalt) are not lost during ablation and can be recovered for recycling. Pre- and post-ablation materials are characterized with a suite of diagnostics, including SEM, TEM, X-ray CT, EDS, and XRD, to study changes in material morphology, composition and crystal structure. Graphite exhibited little to no morphological or compositional changes and a slight annealing of its crystal structure. NMC underwent profound morphological and crystallographic changes, but retained its elemental composition. Finally, post-ablation materials were re-manufactured into electrodes and cycled vs lithium metal. Graphite showed equal or better capacity and Coulombic efficiency compared to pre-ablation electrodes, while the post-ablation NMC exhibited severely reduced electrochemical performance. We discuss the outlook for application of this work to advanced manufacturing lines that produce next-generation, laser-patterned electrodes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Electron and X-Ray Spectroscopy Techniques · Radiation Effects in Electronics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. 30 Years of lithium–ion batteries10.1002/adma.201800561 ↗
2. Applications of lithium–ion batteries in grid-scale energy storage systems10.1007/s12209-020-00236-w ↗
3. Current and future lithium–ion battery manufacturing10.1016/j.isci.2021.102332 ↗
4. A review of laser electrode processing for development and manufacturing of lithium–ion batteries10.1515/nanoph-2017-0044 ↗
5. Recent progress in laser texturing of battery materials: A review of tuning electrochemical performances, related material development, and prospects for large-scale manufacturing
6. Laser structuring of electrodes in roll-to-roll environment using multi-beam processing: Process upscaling and its perspective
7. Laser ablation for structuring Li–ion electrodes for fast charging and its impact on material properties, rate capability, Li plating, and wetting10.1016/j.jpowsour.2022.231464 ↗
8. Efficient fast-charging of lithium–ion batteries enabled by laser-patterned three-dimensional graphite anode architectures10.1016/j.jpowsour.2020.228475 ↗
9. The ultrafast laser ablation of li (Ni0.6Mn0.2Co0.2)O2 electrodes with high mass loading10.3390/app9194067 ↗
10. Ultrafast-laser micro-structuring of LiNi0.8Mn0.1Co0.1O2 cathode for high-rate capability of three-dimensional Li–ion batteries10.3390/nano12213897 ↗
11. Electrochemical modeling and simulation of the improved high-rate discharging performance of through-holed LiNi1/3Mn1/3Co1/3O2 cathodes prepared with a picosecond pulsed laser for lithium–ion batteries10.1016/j.electacta.2023.142636 ↗
12. Review of the structure and performance of through-holed anodes and cathodes prepared with a picosecond pulsed laser for lithium–ion batteries
13. Influence of laser pulse duration on the electrochemical performance of laser structured LiFePO4 composite electrodes10.1016/j.jpowsour.2015.10.086 ↗
14. Challenges, laser processing and electrochemical characteristics on application of ultra-thick electrode for high-energy lithium–ion battery10.1016/j.jpowsour.2020.228948 ↗
15. Femtosecond laser structuring of graphite anodes for improved lithium–ion batteries: Ablation characteristics and process design10.2351/1.5040611 ↗
16. Electrochemical performance of thick-film Li(Ni0.6Mn0.2Co0.2)O2 cathode with hierarchic structures and laser ablation10.3390/nano11112962 ↗
17. Performance enhancement of Li–ion battery by laser structuring of thick electrode with low porosity10.1016/j.jiec.2018.10.012 ↗
18. Laser processing of thick Li(NiMnCo)O2 electrodes for lithium–ion batteries
19. A new approach for rapid electrolyte wetting in tape cast electrodes for lithium–ion batteries10.1039/C4TA02353F ↗
20. Rapid electrolyte wetting of lithium–ion batteries containing laser structured electrodes: In situ visualization by neutron radiography10.1007/s00170-019-03347-4 ↗
21. Recent advances in upscaling ultrafast laser structuring of high-energy electrodes for lithium–ion batteries
22. Extending the 3D-battery concept: Large areal ultrashort pulsed laser structuring of multilayered electrode coatings
23. Tremolet de Villers · 2023
24. Laser-preparation of geometrically optimised samples for X-ray nano-CT10.1111/jmi.12577 ↗
25. The use of contrast enhancement techniques in X-ray imaging of lithium–ion battery electrodes10.1016/j.ces.2016.04.023 ↗
26. Effect of particle size on lithium intercalation rates in natural graphite10.1016/S0378-7753(01)00853-9 ↗
27. Effect of particle morphology on lithium intercalation rates in natural graphite10.1016/S0378-7753(03)00801-2 ↗
28. Simulating the impact of particle size distribution on the performance of graphite electrodes in lithium–ion batteries10.1002/ente.201600232 ↗
29. Surface structure, morphology, and stability of Li(Ni1/3Mn1/3Co1/3)O2 cathode material10.1021/acs.jpcc.7b00896 ↗
30. Application of a holed cathode and anode prepared with a picosecond pulsed laser to lithium ion battery (2) ∼ analysis of the structure of holed cathode layers∼10.1149/09707.0859ecst ↗
31. Enhancement of bovine bone ablation assisted by a transparent liquid layer on a target surface10.1109/JQE.2006.875867 ↗
32. Effect of liquid thickness on laser ablation efficiency10.1063/1.2715746 ↗
33. Thermal studies on natural and modified gums10.1016/j.polymertesting.2003.11.001 ↗
34. Kinetics of thermal decomposition of styrene-butadiene rubber at low heating rates in nitrogen and oxygen10.1016/S0010-2180(96)00142-3 ↗
35. Purely hexagonal graphite and the influence of surface modifications on its electrochemical lithium insertion properties10.1149/1.1486238 ↗
36. Ni/Li disordering in layered transition metal oxide: Electrochemical impact, origin, and control10.1021/acs.accounts.9b00033 ↗
37. Synchrotron-based X-ray diffraction and absorption spectroscopy studies on layered LiNixMnyCozO2 cathode materials: A review10.1016/j.ensm.2022.04.012 ↗
38. Examining different recycling processes for lithium–ion batteries10.1038/s41893-019-0222-5 ↗