journal article·2024-02Open access

Direct venting during fast charging of lithium-ion batteries

Yalun Li, Xinlei Gao, Huizhi Wang, Gregory J. Offer, Shichun Yang, Zhengming Zhao, Minggao Ouyang

Abstract

Lithium-ion batteries pose high risks of failure when subjected to fast charging due to accumulated degradation from side reactions. Venting is a common failure behaviour that results in the release of gases and depressurization. However, the connection between fast-charging degradation and venting characteristics remains unclear. In this study, fast-charging experiments are conducted on LiNi0.6Mn0.2Co0.2O2 (NMC622)/graphite prismatic cells (51 Ah) with controlled cooling, followed by adiabatic thermal runaway tests. The degraded cell, after 4C charging, shows venting at a temperature 34.4 °C lower than a fresh cell. Gas analysis of the degraded anode-electrolyte partially reactive system in hot-box tests reveals that the reaction between plated lithium and electrolyte was a primary contributor to the additional gases. The fast-charging protocols are conducted under natural convection with less heat dissipation, causing battery swelling and venting without thermal runaway when subjected to excessive cycling at off-limit charge rates (5C and 5.6C). The temperature decreasing rates during rest after each charging process slow down or stabilize for a certain period, highlighting the role of exothermic side reactions. This experimentally demonstrates that venting failures can be directly triggered by the exothermic, gas generating reaction during fast charging. These findings inform future designs for safe and rapid battery charging.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
2. Challenges and opportunities toward fast-charging of lithium-ion batteries10.1016/j.est.2020.101837 ↗
3. Degradation identification of LiNi0.8Co0.1Mn0.1O2/graphite lithium-ion batteries under fast charging conditions10.1016/j.electacta.2021.138979 ↗
4. Revealing the impact of fast charge cycling on the thermal safety of lithium-ion batteries10.1021/acsaem.2c00688 ↗
5. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
6. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
7. Reversible Li plating on graphite anodes through electrolyte engineering for fast-charging batteries10.1002/anie.202302285 ↗
8. Li plating regulation on fast-charging graphite anodes by a triglyme-LiNO3 synergistic electrolyte additive
9. Lithium ion battery degradation: what you need to know
10. Fast-charging effects on ageing for energy-optimized automotive LiNi1/3Mn1/3Co1/3O2/graphite prismatic lithium-ion cells10.1016/j.jpowsour.2019.02.095 ↗
11. Operando detection of Li plating during fast charging of Li-ion batteries using incremental capacity analysis10.1016/j.jpowsour.2022.231601 ↗
12. Operando quantified lithium plating determination enabled by dynamic capacitance measurement in working Li-ion batteries
13. A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries10.1016/j.etran.2019.100034 ↗
14. An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode10.1039/D1EE00508A ↗
15. Ion transport kinetics in low-temperature lithium metal batteries10.1002/aenm.202202432 ↗
16. Nonflammable polyfluorides-anchored quasi-solid electrolytes for ultra-safe anode-free lithium pouch cells without thermal runaway10.1002/adma.202304762 ↗
17. Mitigating thermal runaway of lithium-ion batteries10.1016/j.joule.2020.02.010 ↗
18. Parameter-independent error correction for potential measurements by reference electrode in lithium-ion batteries10.1016/j.jechem.2021.09.006 ↗
19. Minimum lithium plating overpotential control based charging strategy for parallel battery module prevents side reactions10.1016/j.jpowsour.2021.229772 ↗
20. Thermal runaway triggered by plated lithium on the anode after fast charging10.1021/acsami.9b16589 ↗
21. Battery eruption triggered by plated lithium on an anode during thermal runaway after fast charging10.1016/j.energy.2021.122097 ↗
22. Degradation-safety analytics in lithium-ion cells: Part I. Aging under charge/discharge cycling10.1149/1945-7111/abc8c0 ↗
23. Degradation-safety analytics in lithium-ion cells and modules Part II. Overcharge and external short circuit scenarios
24. Degradation-safety analytics in lithium-ion cells and modules: Part III. Aging and safety of pouch format cells
25. Effects of rest time after Li plating on safety behavior—ARC tests with commercial high-energy 18650 Li-ion cells10.1016/j.electacta.2017.02.036 ↗
26. Electrochemical cross-talk leading to gas evolution and capacity fade in LiNi0.5Mn1.5O4/graphite full-cells10.1021/acs.jpcc.6b11184 ↗
27. Swelling mechanism of 0%SOC lithium iron phosphate battery at high temperature storage10.1016/j.est.2020.101791 ↗
28. Phenomenological force and swelling models for rechargeable lithium-ion battery cells10.1016/j.jpowsour.2016.01.103 ↗
29. An on-line transient study on gassing mechanism of lithium titanate batteries10.1149/2.0631916jes ↗
30. Gas evolution in commercial Li-ion battery cells measured by on-line mass spectrometry – effects of C-rate and cell voltage10.1016/j.jpowsour.2020.228968 ↗
31. Overcharge study in Li4Ti5O12 based lithium-ion pouch cell10.1149/2.0491613jes ↗
32. Overcharge behaviors and failure mechanism of lithium-ion batteries under different test conditions10.1016/j.apenergy.2019.05.015 ↗
33. Towards more realistic Li-ion battery safety tests based on Li-plating as internal cell error10.1016/j.est.2023.108200 ↗
34. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry10.1016/j.jpowsour.2014.01.005 ↗
35. Revealing particle venting of lithium-ion batteries during thermal runaway: a multi-scale model toward multiphase process10.1016/j.etran.2023.100237 ↗
36. Multiscale observation of Li plating for lithium-ion batteries10.1007/s12598-021-01730-3 ↗
37. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells10.1016/j.jpowsour.2018.05.073 ↗
38. Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
39. Revealing lithium battery gas generation for safer practical applications10.1002/adfm.202208586 ↗
40. Probing the interfacial chemistry of solid-state lithium batteries10.1016/j.ssi.2019.115068 ↗
41. Asymmetric temperature modulation for extreme fast charging of lithium-ion batteries10.1016/j.joule.2019.09.021 ↗
42. Thermal kinetics comparison of delithiated Li [NixCoyMn1-x-y]O2 cathodes10.1016/j.jpowsour.2021.230582 ↗
43. Challenges and opportunities to mitigate the catastrophic thermal runaway of high-energy batteries
44. Thermal runaway of lithium-ion batteries without internal short circuit10.1016/j.joule.2018.06.015 ↗
45. Reductive gas manipulation at early self-heating stage enables controllable battery thermal failure10.1016/j.joule.2022.10.010 ↗