journal article·2024-01

Synthesis and properties of poly(arylene ether ketone)s with densely piperidinium-functionalized hexaphenylbenzene pendants for anion exchange membranes

Yunji Xie, Kaiqi Wang, Di Liu, Jinhui Pang

Publisher page

Abstract

Concentrated functionalization of the polymer side chain is widely considered as an effective structural strategy for improving the properties of anion exchange membranes (AEMs). However, the synthetic process typically involves highly toxic reagents. Herein, a series of poly(arylene ether ketone)s with densely benzyl- N -methylpiperidinium-functionalized hexaphenylbenzene pendants is synthesized, avoiding the demand of highly toxic reagents. The fabricated membranes present pronounced microphase separation resulting from the strong contrast in polarity between the hydrophobic polymer backbone and hydrophilic pendants. In contrast to analogous AEMs, the incorporation of bulky and rigid hexaphenylbenzene moieties enlarges the free volume within the membranes, which significantly enhances water absorption and inhibits dimensional change. Moreover, the presence of piperidinium-based cationic groups considerably enhances the alkaline stability of the membranes. One of the prepared membranes with an ion exchange capacity of 1.31 meq g −1 exhibits water uptake, swelling ratio, and hydroxide conductivity of 67.2%, 14.5%, and 49.2 mS cm −1 at 80 °C, respectively. The loss of conductivity is less than 6% after immersion in a 4 M KOH aqueous solution at 30 °C for 480 h. Additionally, a maximum power density of 340.1 mW cm −2 is achieved in the H 2/O 2 single-cell test, indicating promising application potential for the fabricated membranes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Hydrogen energy storage integrated hybrid renewable energy systems: a review analysis for future research directions10.1016/j.ijhydene.2022.03.208 ↗
2. Recent development in design a state-of-art proton exchange membrane fuel cell from stack to system: theory, integration and prospective10.1016/j.ijhydene.2022.11.212 ↗
3. Capabilities and limitations of rotating disk electrodes versus membrane electrode assemblies in the investigation of electrocatalysts10.1038/s41929-022-00776-5 ↗
4. An overview of proton exchange membranes for fuel cells: materials and manufacturing10.1016/j.ijhydene.2022.04.099 ↗
5. Anion-exchange membrane water electrolyzers and fuel cells10.1039/D2CS00038E ↗
6. Toward the fast and durable alkaline hydrogen oxidation reaction on ruthenium10.1039/D2EE02216H ↗
7. Progress in constructing high-performance anion exchange Membrane: molecular design, microphase controllability and In-device property10.1016/j.cej.2022.141094 ↗
8. Anion-conducting polyelectrolytes for energy devices10.1016/j.trechm.2021.12.009 ↗
9. A review on anion exchange membranes for fuel cells: anion-exchange polyelectrolytes and synthesis strategies10.1016/j.ijhydene.2022.06.140 ↗
10. Toward alkaline-stable anion exchange membranes in fuel cells: cycloaliphatic quaternary ammonium-based anion conductors10.1007/s41918-021-00105-7 ↗
11. Chain architecture dependence of morphology and water transport in poly(fluorene alkylene)-based anion-exchange membranes10.1021/acs.macromol.2c01488 ↗
12. Facile preparation of highly alkaline stable poly(arylene-imidazolium) anion exchange membranes through an ionized monomer strategy10.1021/acs.macromol.0c02612 ↗
13. Poly (isatin biphenylene) polymer containing ferrocenium derivatives for anion exchange membrane fuel cell10.1016/j.memsci.2021.119986 ↗
14. High conductivity and alkaline stability of anion exchange membranes containing multiple flexible side-chain piperidinium ions10.1039/D1QM00826A ↗
15. Multi-block poly(ether sulfone) for anion exchange membranes with long side chains densely terminated by piperidinium10.1016/j.memsci.2020.118537 ↗
16. Clustered piperidinium-functionalized poly(terphenylene) anion exchange membranes with well-developed conductive nanochannels10.1016/j.jcis.2021.10.122 ↗
17. Constructing micro-phase separation structure to improve the performance of anion-exchange membrane based on poly(aryl piperidinium) cross-linked membranes10.1016/j.jpowsour.2020.229429 ↗
18. In-situ crosslinked, side chain polybenzimidazole-based anion exchange membranes for alkaline direct methanol fuel cells
19. Anion exchange membrane based on poly(arylene ether ketone) containing long alkyl densely quaternized carbazole derivative pendant10.1016/j.memsci.2021.119079 ↗
20. Side-chain-type anion exchange membranes based on poly(arylene ether sulfone)s containing high-density quaternary ammonium groups10.1021/acsami.1c00889 ↗
21. Anion exchange membranes based on tetra-quaternized poly(arylene ether ketone)10.1016/j.memsci.2015.09.003 ↗
22. Synthesis and properties of a novel poly(aryl ether ketone)s with quaternary ammonium pendant groups for anion exchange membranes10.1016/j.memsci.2013.02.046 ↗
23. Current challenges and perspectives of polymer electrolyte membranes10.1021/acs.macromol.1c02053 ↗
24. Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids10.1002/cssc.201403022 ↗
25. Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells10.1038/s41560-019-0372-8 ↗
26. Wu · 2021
27. Poly(arylene piperidinium) hydroxide ion exchange membranes: synthesis, alkaline stability, and conductivity10.1002/adfm.201702758 ↗
28. Anion exchange membranes for fuel cells: state-of-the-art and perspectives10.1002/aenm.202200934 ↗
29. Alkaline membranes toward electrochemical energy devices: recent development and future perspectives10.1021/acscentsci.3c00597 ↗
30. Fluorene-based hydroxide ion conducting polymers for chemically stable anion exchange membrane fuel cells10.1021/acsmacrolett.5b00145 ↗
31. Alkaline stability of quaternized diels–alder polyphenylenes10.1021/acs.macromol.9b00853 ↗
32. Alkaline anion exchange membrane containing pyrene-based π-π stacking interactions10.1016/j.jpowsour.2022.232247 ↗
33. Tailoring properties and applications of polysulfone membranes by chemical modification: structure-properties-applications relationship10.1016/j.eurpolymj.2023.112316 ↗
34. Polymer electrolyte membranes based on poly(arylene ether)s with penta-sulfonated pendent groups10.1039/C2TA00363E ↗
35. Fluorinated poly(arylene ether ketone) containing pendent hexasulfophenyl for proton exchange membrane10.1016/j.memsci.2015.05.027 ↗
36. New comb-shaped ionomers based on hydrophobic poly(aryl ether ketone) backbone bearing hydrophilic high concentration sulfonated micro-cluster10.1016/j.polymer.2016.05.009 ↗
37. Crystalline hybrid polyphenylene macromolecules from octaalkynylsilsesquioxanes, crystal structures, and a potential route to 3-D graphenes10.1021/ma200081q ↗
38. Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel linear aromatic poly(sulflde-ketone)s10.1021/ma071423p ↗
39. Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel branched poly(ether-ketone)s10.1021/ma071422x ↗
40. Ion exchange membranes: constructing and tuning ion transport channels10.1002/adfm.202207366 ↗
41. Ion transport by nanochannels in ion-containing aromatic copolymers10.1021/ma402254h ↗
42. Micro-block poly(arylene ether sulfone)s with densely quaternized units for anion exchange membranes: effects of benzyl N-methylpiperidinium and benzyl trimethyl ammonium cations10.1016/j.memsci.2022.121333 ↗
43. Micro-block versus random quaternized poly(arylene ether sulfones) with highly dense quaternization units for anion exchange membranes10.1039/C9PY01951K ↗
44. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
45. High performance aliphatic-heterocyclic benzyl-quaternary ammonium radiation-grafted anion-exchange membranes10.1039/C6EE01958G ↗
46. Highly conductive and alkaline stable partially fluorinated anion exchange membranes for alkaline fuel cells: effect of ammonium head groups
47. Hexaarylbenzene: evolution of properties and applications of multitalented scaffold10.1021/acs.chemrev.6b00144 ↗
48. Synthesis and isolation of polytrityl cations by utilizing hexaphenylbenzene and tetraphenylmethane scaffolds10.1021/jo035598i ↗
49. High performance poly(carbazolyl aryl piperidinium) anion exchange membranes for alkaline fuel cells10.1016/j.memsci.2022.120676 ↗
50. High performance tetra-sulfonated poly(p-phenylene-co-aryl ether ketone) membranes with microblock moieties for passive direct methanol fuel cells10.1016/j.memsci.2016.06.029 ↗
51. Highly branched poly(arylene ether ketone sulfone)s bearing flexible sulfoalkyl side chains for proton exchange membranes10.1021/acsaem.2c03721 ↗
52. Branched comb-shaped poly(arylene ether sulfone) s containing flexible alkyl imidazolium side chains as anion exchange membranes10.1039/C8TA02115E ↗
53. Cross-Linked alkaline anion exchange membrane from N-spirocyclic quaternary ammonium and polybenzimidazole10.1021/acsapm.1c01926 ↗
54. Low boiling point solvent-soluble, highly conductive and stable poly (ether phenylene piperidinium) anion exchange membrane10.1016/j.memsci.2021.120185 ↗
55. Design, synthesis and characterization of anion exchange membranes containing guanidinium salts with ultrahigh dimensional stability10.1016/j.memsci.2021.120008 ↗
56. Hydrophobic-hydrophilic comb-type quaternary ammonium-functionalized SEBS copolymers for high performance anion exchange membranes10.1016/j.memsci.2020.117829 ↗
57. Pendent persubstituted imidazolium and a polyimidazolium cross-linked polymer as robust alkaline anion exchange membranes for solid-state Zn–air batteries10.1021/acsaem.1c03318 ↗
58. Polynorbornene-based anion exchange membranes with hydrophobic large steric hindrance arylene substituent10.1016/j.memsci.2021.119938 ↗
59. Poly(ether sulfone)s with pendent imidazolium for anion exchange membranes via click chemistry10.1016/j.polymer.2020.122944 ↗
60. Multi-block poly(ether sulfone) for anion exchange membranes with long side chains densely terminated by piperidinium10.1016/j.memsci.2020.118537 ↗
61. Two new anion exchange membranes based on poly(bis-arylimidazolium) ionenes blend polybenzimidazole10.1016/j.polymer.2021.124491 ↗
62. Anion exchange polyelectrolytes for membranes and ionomers10.1016/j.progpolymsci.2020.101345 ↗
63. Alkaline-stable anion exchange membranes: a review of synthetic approaches10.1016/j.progpolymsci.2019.101177 ↗
64. Progress in high-performance anion exchange membranes based on the design of stable cations for alkaline fuel cells
65. Piperidinium-functionalized anion exchange membranes and their application in alkaline fuel cells and water electrolysis10.1039/C9TA01167F ↗
66. Sulfonated branched poly(arylene ether ketone sulfone) proton exchange membranes: effects of degree of branching and ion exchange capacity10.1016/j.eurpolymj.2023.111837 ↗
67. Poly(Alkyl-Terphenyl piperidinium) ionomers and membranes with an outstanding alkaline-membrane fuel-cell performance of 2.58 W cm−210.1002/anie.202013395 ↗
68. Rational design of polyaromatic ionomers for alkaline membrane fuel cells with >1 W cm−2 power density10.1039/C8EE02192A ↗
69. The importance of water transport in high conductivity and high-power alkaline fuel cells10.1149/2.0022005JES ↗
70. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs (vol 11, pg 551, 2018)10.1039/C8EE90013B ↗