journal article·2024-01Open access

High performance aluminum-air flow batteries through double-face architecture and laser-modified and friction-stir processed 3D anode

Lingyue Zhang, David Fieser, Bapi Bera, Douglas Aaron, Matthew M. Mench, Anming Hu, Yuan Li, Jian Chen, Zhili Feng, Antonino Gulino, Giuseppe Compagnini

Abstract

Aluminum-air batteries (AAB) are regarded as one of the most promising beyond-lithium high-energy-density storage candidates. This paper introduces a three-dimensional (3D) Al 7075 anode enabled by femtosecond laser and friction-stir process which, along with a special double-face anode architecture provides world-class performance. Electrochemical characterizations prove that the corrosion resistance of the modified 3D Al 7075 FSP anode was enhanced, and electrochemically active surface area (ECSA) was increased compared with that of normal Al 7075 anode. Friction-stir processing reduced the mean grain size from 30 μm to 3 μm. The discharge performance of 3D Al 7075 FSP anode is shown to be quite stable, and the average values of energy density are significantly increased from 2256 mWh g −1 to 2941 mWh g −1 at 100 mA cm −2. In a double-face flowing Al-air battery system, the 3D Al 7075 FSP anode exhibited significantly better electrocatalytic performance (discharge voltage of 0.76 V at 400 mA cm −2, and power density of 337.8 mW cm −2) than that of a commercial Al 7075 anode.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Material design and engineering of next-generation flow-battery technologies10.1038/natrevmats.2016.80 ↗
2. Toward a new generation of low cost, efficient, and durable metal-air flow batteries10.1039/C9TA10658H ↗
3. Zhang · Energy Environ. Sci. · 2011 · 7 · 286810.1039/C4EE00143E ↗
4. B. Dunn, H. Kamath, J.-M. Tarascon. Science, 334, 928-935..10.1126/science.1212741 ↗
5. Current challenges and routes forward for nonaqueous lithium–air batteries10.1021/acs.chemrev.9b00545 ↗
6. Development and application of carbon fiber in batteries10.1016/j.cej.2019.123294 ↗
7. The rechargeable aluminum battery: opportunities and challenges10.1002/anie.201814031 ↗
8. Recent developments in materials for aluminum–air batteries: a review10.1016/j.jiec.2015.08.004 ↗
9. Defect-rich and ultrathin N doped carbon nanosheets as advanced trifunctional metal-free electrocatalysts for the ORR, OER and HER10.1039/C8EE03276A ↗
10. Combining Al-air batteries with paper-making industry, a novel type of flexible primary battery technology10.1016/j.electacta.2019.07.049 ↗
11. Energy analysis of hydrogen and electricity production from aluminum-based processes10.1016/j.apenergy.2011.02.018 ↗
12. A comprehensive review on recent progress in aluminum–air batteries10.1016/j.gee.2017.06.006 ↗
13. Flexible and wearable all-solid-state Al-air battery based on iron carbide encapsulated in electrospun porous carbon nanofibers10.1021/acsami.8b14840 ↗
14. High-power double-face flow Al-air battery enabled by CeO2 decorated MnOOH nanorods catalyst10.1016/j.cej.2020.126772 ↗
15. Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market10.1016/j.jpowsour.2019.01.018 ↗
16. Influence of iron source type on the electrocatalytic activity toward oxygen reduction reaction in Fe-N/C for Al-air batteries10.1149/2.0941809jes ↗
17. Seed-mediated atomic-scale reconstruction of silver manganate nanoplates for oxygen reduction towards high-energy aluminum-air flow batteries10.1038/s41467-018-06211-3 ↗
18. N-CNT supported Fe/Ce bimetallic catalyst for Al-air aqueous batteries10.1016/j.apsusc.2022.155185 ↗
19. Cerium ion intercalated MnO2 nanospheres with high catalytic activity toward oxygen reduction reaction for aluminum-air batteries10.1016/j.electacta.2018.01.057 ↗
20. Airborne ultrasound catalyzed saltwater Al/Mg-air flow batteries10.1016/j.energy.2023.126991 ↗
21. High energy efficiency and high power density aluminum‐air flow battery10.1002/er.5485 ↗
22. Suppressing corrosion in primary aluminum–air batteries via oil displacement10.1126/science.aat9149 ↗
23. Performance of Al–0.5 Mg–0.02 Ga–0.1 Sn–0.5 Mn as anode for Al–air battery in NaCl solutions10.1016/j.jpowsour.2013.12.053 ↗
24. Recent progress of metal–air batteries—a mini review10.3390/app9142787 ↗
25. Electrochemical performance of aluminum anodes with different grain sizes for Al-air batteries10.1149/1945-7111/ab754a ↗
26. The effect of grain size on aluminum anodes for Al–air batteries in alkaline electrolytes10.1016/j.jpowsour.2015.03.063 ↗
27. Friction stir processing induced elctrochemical performance improvement of commercial Al for Al-air battery10.1016/j.electacta.2020.136635 ↗
28. Corrosion behaviour improvement from the ultrafine-grained Al–Zn–In alloys in Al–air battery10.1016/j.egyr.2022.03.132 ↗
29. Grain size distribution effects on the corrosion behaviour of materials10.1016/j.corsci.2012.04.040 ↗
30. Friction stir processing of aluminium alloy AA7075: microstructure, surface chemistry and corrosion resistance10.1016/j.corsci.2016.02.006 ↗
31. Effect of friction stir processing on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy10.1243/09544062JMES847 ↗
32. Challenges and strategies of low‐cost aluminum anodes for high‐performance Al‐based batteries10.1002/adma.202102026 ↗
33. Developments in electrode materials and electrolytes for aluminum–air batteries10.1016/j.jpowsour.2013.01.141 ↗
34. Metallic aluminum nanorods: synthesis via vapor-deposition and applications in Al/air batteries10.1021/cm7018795 ↗
35. Laser sintering of printed anodes for al-air batteries10.1149/2.0811803jes ↗
36. An all‐solid‐state fiber‐shaped aluminum–air battery with flexibility, stretchability, and high electrochemical performance10.1002/ange.201601804 ↗
37. All-solid-state Al–air batteries with polymer alkaline gel electrolyte10.1016/j.jpowsour.2013.11.020 ↗
38. High power density Al-air batteries with commercial three-dimensional aluminum foam anode10.1007/s11581-020-03618-1 ↗
39. Electrochemical properties of laser-printed multilayer anodes for lithium-ion batteries10.3390/nano13172411 ↗
40. Effect of laser-textured Cu foil with deep ablation on Si anode performance in Li-ion batteries10.3390/nano13182534 ↗
41. Fabrication of Micron-Sized Protrusions on Metal Surface for Metal Polymer Easy-Disassembly Joining by Selective Laser Melting Technology.
42. Densely accessible Fe-Nx active sites decorated mesoporous-carbon-spheres for oxygen reduction towards high performance aluminum-air flow batteries10.1016/j.apcatb.2021.120176 ↗
43. High energy efficiency and high-power density aluminum‐air flow battery10.1002/er.5485 ↗
44. High energy density metal-air batteries: a review10.1149/2.062310jes ↗
45. The corrosion and electrochemical behaviour of pure aluminium in alkaline methanol solutions10.1007/s10800-007-9310-8 ↗
46. The effect of zinc on the aluminum anode of the aluminum–air battery10.1016/j.jpowsour.2004.06.043 ↗
47. Performance of Al− 1Mg− 1Zn− 0.1 Ga− 0.1 Sn as anode for Al-air battery10.1016/j.electacta.2014.02.080 ↗
48. Conformal dispersed cobalt nanoparticles in hollow carbon nanotube arrays for flexible Zn-air and Al-air batteries10.1016/j.cej.2019.03.147 ↗
49. Performance of Al-0.5 in as anode for Al–air battery in inhibited alkaline solutions10.1149/2.0881508jes ↗
50. Xanthan and κ-carrageenan based alkaline hydrogels as electrolytes for Al/air batteries10.1016/j.carbpol.2016.09.076 ↗
51. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
52. Reversible Al metal anodes enabled by amorphization for aqueous aluminum batteries10.1021/jacs.2c04820 ↗
53. Enhanced hydrogen evolution catalysis from chemically exfoliated metallic MoS2 nanosheets10.1021/ja404523s ↗
54. Ruthenium-cobalt nanoalloys encapsulated in nitrogen-doped graphene as active electrocatalysts for producing hydrogen in alkaline media
55. Bifunctional oxygen electrodes with gradient hydrophilic/hydrophobic reactive interfaces for metal air flow batteries10.1016/j.ces.2020.115795 ↗
56. Intergranular corrosion of AA6082 Al–Mg–Si alloy extrusion: the influence of trace Cu and grain boundary misorientation10.1016/j.jallcom.2020.157228 ↗
57. Corrosion of cast aluminum alloys: a review10.3390/met10101384 ↗
58. Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement10.1080/10408436.2018.1490251 ↗
59. 2020
60. Identification of precipitates in 7075 Al after high temperature aging10.1016/0036-9748(81)90228-3 ↗
61. Microstructure evolution and mechanical property characterization of 6063 aluminum alloy tubes processed with friction stir back extrusion10.1007/s11837-019-03852-7 ↗
62. Electrophoretic deposition and thermo-chemical properties of Al/Fe2O3 nanothermite thick films