journal article·2023-10

Effects of different elements based electrolyte additives on the performance and interfacial chemistry of high-voltage LiCoO2/artificial graphite pouch cell

Xu-Feng Zang, Fang Chen, Yixuan Jiang, Menghang Su, Renbo Deng, Tong Li

Publisher page

Abstract

Film-forming electrolyte additives are widely used for optimizing cathode/electrolyte interphase (CEI) films of LiCoO 2 -based lithium-ion batteries. Nevertheless, the effects of the four typical additives with different elements including vinylene carbonate (VC), 1,3-propane sultone (PS), fluoroethylene carbonate (FEC), and adiponitrile (ADN) on interfacial chemistries of LiCoO 2 cathode and practical performances of LiCoO 2 -based batteries at various temperatures are still unclear. Herein, the four additives are evaluated for a LiCoO 2 /artificial graphite pouch cell at 3−4.5 V. It is found that the additives significantly affect the discharge capacities of the cells at −20 °C and various rates, and stabilities when stored at 60 °C and cycled at room temperature. Among them, the FEC-containing cell exhibits the most outstanding performance while PS has a low positive effect on almost all properties. VC enables good kinetic abilities when ADN can improve stability. Combined with physical characterizations and theoretical calculation, the functional mechanisms of the additives on LiCoO 2 cathode are understudied. Results demonstrate that the additives dictate CEI films possessing specific elements through oxygenolysis, surface adsorption or passivation, then adjust the morphologies and protection effects of CEI films. These findings can provide important information for fundamental exploration and engineering design of high-voltage LiCoO 2-based batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Realizing high volumetric lithium storage by compact and mechanically stable anode designs10.1021/acsenergylett.0c00851 ↗
2. The impact of electrode with carbon materials on safety performance of lithium-ion batteries: a review10.1016/j.carbon.2022.02.011 ↗
3. Realizing long-term cycling stability and superior rate performance of 4.5 V–LiCoO2 by aluminum doped zinc oxide coating achieved by a simple wet-mixing method10.1016/j.jpowsour.2020.228423 ↗
4. Effect of fluoroethylene carbonate as an electrolyte solvent in the LiNi0.5Mn1.5O4/Li4Ti5O12 cell10.1016/j.jallcom.2019.152064 ↗
5. Film-forming electrolyte additives for rechargeable lithium-ion batteries: progress and outlook10.1039/C9TA00126C ↗
6. Mechanism study of unsaturated tripropargyl phosphate as an efficient electrolyte additive forming multifunctional interphases in lithium ion and lithium metal batteries10.1021/acsami.9b21605 ↗
7. Insights into the efficient roles of solid electrolyte interphase derived from vinylene carbonate additive in rechargeable batteries10.1016/j.jelechem.2022.116126 ↗
8. Constructing solid electrode-electrolyte interfaces in high-voltage Li|LiCoO2 batteries under dual-additive electrolyte synergistic effect10.1016/j.jpowsour.2022.232311 ↗
9. Sulfur-containing compounds as electrolyte additives for lithium-ion batteries10.1002/inf2.12235 ↗
10. Electrolyte-additive-driven interfacial engineering for high-capacity electrodes in lithium-ion batteries: promise and challenges10.1021/acsenergylett.0c00468 ↗
11. The roles of sulfur-containing additives and their working mechanism on the temperature-dependent performances of Li-ion batteries10.1149/2.0331811jes ↗
12. Additive stabilization of SEI on graphite observed using cryo-electron microscopy10.1039/D1EE01678D ↗
13. Synergetic effect of electrolyte coadditives for a high-voltage LiCoO2 cathode10.1021/acs.jpcc.1c09488 ↗
14. Effect of fluoroethylene carbonate additive on the low–temperature performance of lithium–ion batteries10.1016/j.jelechem.2022.116870 ↗
15. Adiponitrile (adn): a stabilizer for the LiNi0.8Co0.1Mn0.1O2 (NCM811) electrode/electrolyte interface of a graphite/NCM811 Li-ion cell10.1021/acsami.1c23335 ↗
16. Towards high-voltage Li-ion batteries: reversible cycling of graphite anodes and Li-ion batteries in adiponitrile-based electrolytes10.1016/j.electacta.2018.05.133 ↗
17. Effect of operation voltage on the practical performance of high-energy-density LiCoO2/artificial graphite pouch cells at various temperatures10.1016/j.jallcom.2022.164970 ↗
18. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
19. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
20. DFT+U study of the surface structure and stability of Co3O4(110): dependence on U10.1021/acs.jpcc.5b02298 ↗
21. Fundamentals and challenges of lithium ion batteries at temperatures between −40 and 60 °C
22. Positive film-forming effect of fluoroethylene carbonate (FEC) on high-voltage cycling with three-electrode LiCoO2/Graphite pouch cell10.1016/j.electacta.2018.02.151 ↗
23. 2,3,4,5,6-pentafluorophenyl methanesulfonate as a versatile electrolyte additive matches LiNi0.5Co0.2Mn0.3O2/graphite batteries working in a wide-temperature range10.1021/acsami.8b04743 ↗
24. Bifunctional mechanism and electrochemical performance of self-healing nitrile ether electrolyte additives in 4.5 V LiCoO2/artificial graphite lithium-ion batteries10.1016/j.jpowsour.2022.231799 ↗
25. Lithium difluorophosphate as an additive to improve the low temperature performance of LiNi0.5Co0.2Mn0.3O2/graphite cells10.1016/j.electacta.2016.10.037 ↗
26. Effect of testing temperature on the electrochemical properties of Li(Ni0.6Mn0.2Co0.2)O2 and its Ti3C2(OH)2 modification as cathode materials for lithium-ion batteries10.1016/j.jallcom.2019.07.027 ↗
27. High-performance silicon anodes enabled by nonflammable localized high-concentration electrolytes10.1002/aenm.201900784 ↗
28. Depth-dependent understanding of the degradation mechanisms for typical LiNi0.5Co0.2Mn0.3O2/artificial graphite lithium-ion batteries upon high-temperature storage10.1016/j.jallcom.2023.169662 ↗
29. New lithium salt forms interphases suppressing both Li dendrite and polysulfide shuttling10.1002/aenm.201903937 ↗
30. The performances and degradation mechanisms of a commercial artificial graphite/LiNi0.5Co0.2Mn0.3O2 pouch cell at different cutoff voltages and temperatures10.1016/j.jallcom.2021.159678 ↗
31. LiNi0.5Co0.2Mn0.3O2/graphite batteries storing at high temperature: capacity fading and raveling of aging mechanisms10.1016/j.jpowsour.2021.229858 ↗
32. Revealing the correlation between structural evolution and long-term cyclability of the LiNi0.5Co0.2Mn0.3O2/artificial graphite pouch cells at various rates10.1016/j.partic.2023.01.005 ↗
33. Unravelling the influence of quasi single-crystalline architecture on high-voltage and thermal stability of LiNi0.5Co0.2Mn0.3O2 cathode for lithium-ion batteries10.1016/j.cej.2020.124709 ↗
34. Exploring high-voltage fluorinated carbonate electrolytes for LiNi0.5Mn1.5O4 cathode in Li-ion batteries10.1016/j.jechem.2019.05.023 ↗
35. Protective electrode/electrolyte interphases for high energy lithium-ion batteries with p-toluenesulfonyl fluoride electrolyte additive10.1016/j.jechem.2020.04.023 ↗
36. Role of 1,3-propane sultone and vinylene carbonate in solid electrolyte interface formation and gas generation10.1021/acs.jpcc.5b00072 ↗
37. Simultaneous interphase optimizations on the large-area anode and cathode of high-energy-density lithium-ion pouch cells by a multiple additives strategy10.1021/acsami.0c12829 ↗
38. Comparative study of 1,3-propane sultone, prop-1-ene-1,3-sultone and ethylene sulfate as film-forming additives for sodium ion batteries10.1016/j.jpowsour.2022.231726 ↗
39. Investigation the degradation mechanisms of lithium-ion batteries under low-temperature high-rate cycling10.1021/acsaem.2c00957 ↗
40. Resolving nanoscopic and mesoscopic heterogeneity of fluorinated species in battery solid-electrolyte interphases by cryogenic electron microscopy10.1021/acsenergylett.0c00194 ↗
41. Lithium fluoride additives for stable cycling of lithium batteries at high current densities10.1002/aelm.201500246 ↗
42. Adiponitrile (C6H8N2): a new bi‐functional additive for high‐performance Li‐metal batteries
43. One-step integrated comodification to improve the electrochemical performances of high-voltage LiCoO2 for lithium-ion batteries10.1021/acssuschemeng.0c01491 ↗
44. Revealing the role of NH4VO3 treatment in Ni-rich cathode materials with improved electrochemical performance for rechargeable lithium-ion batteries10.1039/C8NR01707G ↗
45. Trimethyl borate as film-forming electrolyte additive to improve high-voltage performances10.1021/acsami.9b03417 ↗
46. High-voltage liquid electrolytes for Li batteries: progress and perspectives10.1039/D1CS00450F ↗
47. Electrochemical effect and mechanism of adiponitrile additive for high-voltage electrolyte10.1016/j.electacta.2016.11.022 ↗
48. Insight into bulk charge transfer of lithium metal anodes by synergism of nickel seeding and LiF-Li3N-Li2S co-doped interphase10.1016/j.ensm.2021.02.033 ↗