Enabling Ti2C MXene on carbon cloth as binder-free anode for distinguished lithium-ion and sodium-ion storage
Source abstract
Abstract
Two-dimensional transition metal carbides and nitrides (MXenes) hold promise as electrode materials for alkali metal ion batteries on account of some fascinating peculiarities. However, the high temperature required in the synthesis of the MAX phase severely hinders its further development. Herein, MAX phase (Ti 2 AlC) is first grown on carbon cloth (CC) by molten salt method at a milder temperature, then the hierarchical structure that Ti 2 C sheets arrayed on the carbon fibers can be obtained after HF treatment, demonstrating 269 mA h g −1 after 400 cycles at 1 mA cm −2 for lithium-ion storage and 206 mA h g −1 after 100 cycles at 0.1 mA cm −2 for sodium-ion storage when served as freestanding anode. Meanwhile, in-situ and ex-situ characterization techniques are employed to monitor the possible phase transitions in the electrochemical process. In addition, the kinetics for carrier diffusion in the electrochemical process is also studied. This work endows edification for configuration of MXene-based freestanding electrode.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Progress in flexible lithium batteries and future prospects10.1039/C3EE43182G ↗
2. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
3. Design of flexible films based on kinked carbon nanofibers for high rate and stable potassium-ion storage10.1007/s40820-022-00791-y ↗
4. Device configurations and future prospects of flexible/stretchable lithium-ion batteries10.1002/adfm.201805596 ↗
5. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
6. Two-dimensional nanostructures for sodium-ion battery anodes10.1039/C7TA10500B ↗
7. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
8. Boosting the cycling stability of hydrated vanadium pentoxide by Y3+ pillaring for sodium-ion batteries10.1016/j.mtener.2018.12.003 ↗
9. A figure of merit for flexible batteries10.1016/j.joule.2020.05.015 ↗
10. The application of hollow structured anodes for sodium-ion batteries: from simple to complex systems10.1002/adma.201800492 ↗
11. Robust and flexible polymer/MXene-derived two dimensional TiO2 hybrid gel electrolyte for dendrite-free solid-state zinc-ion batteries
12. MXene-engineered lithium-sulfur batteries10.1039/C9TA08600E ↗
13. MXene: a promising transition metal carbide anode for lithium-ion batteries10.1016/j.elecom.2012.01.002 ↗
14. Two-dimensional transition metal carbides10.1021/nn204153h ↗
15. Flexible Ti2C MXene film: synthesis, electrochemical performance and capacitance behavior10.1016/j.cej.2021.133582 ↗
16. Li-ion storage properties of two-dimensional titanium-carbide synthesized via fast one-pot method in air atmosphere10.1038/s41467-021-25306-y ↗
17. Sun · 2017
18. The potential application of 2D Ti2CT2 (T = C, O and S) monolayer MXenes as anodes for Na-ion batteries: a theoretical study10.1016/j.commatsci.2019.03.039 ↗
19. Li and Na interaction with Ti2C-MXene: a first-principles calculation10.2477/jccj.2018-0050 ↗
20. Pseudocapacitance of MXene nanosheets for high-power sodium-ion hybrid capacitors10.1038/ncomms7544 ↗
21. Vertically aligned Sn4+ preintercalated Ti2CTX MXene sphere with enhanced Zn ion transportation and superior cycle lifespan10.1002/aenm.202001394 ↗
22. Understanding chemistry of two-dimensional transition metal carbides and carbonitrides (MXenes) with gas analysis10.1021/acsnano.0c03602 ↗
23. Electrochemical etching of Ti2AlC to Ti2CTX (MXene) in low-concentration hydrochloric acid solution10.1039/C7TA05574A ↗
24. Investigation of Ti2AlC formation mechanism through carbon and TiAl diffusional reaction10.1016/j.jeurceramsoc.2017.10.039 ↗
25. On the topotactic transformation of Ti2AlC into a Ti-C-O-F cubic phase by heating in molten lithium fluoride in air10.1111/j.1551-2916.2011.04896.x ↗
26. Raman active phonon modes and heat capacities of Ti2AlC and Cr2AlC ceramics: first-principles and experimental investigations
27. Water-dispersible Ti3C2Tz MXene nanosheets by molten salt etching10.1016/j.isci.2021.103403 ↗
28. TiCx-Ti2C nanocrystals and epitaxial graphene-based lamellae by pulsed laser ablation of bulk TiC in vacuum10.1039/C4CE00358F ↗
29. Oligolayered Ti3C2Tx MXene towards high performance lithium/sodium storage10.1007/s12274-020-2789-6 ↗
30. Selective lithiation-expansion-microexplosion synthesis of two-dimensional fluoride-free mxene10.1021/acsmaterialslett.9b00390 ↗
31. Surface interactions between 2D Ti3C2/Ti2C MXenes and lysozyme10.1016/j.apsusc.2018.12.081 ↗
32. A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte10.1038/s41563-020-0657-0 ↗
33. XPS of cold pressed multilayered and freestanding delaminated 2D thin films of Mo2TiC2Tz and Mo2Ti2C3Tz (MXenes)10.1016/j.apsusc.2019.07.049 ↗
34. Few-layer MoS2 embedded in N-doped carbon fibers with interconnected macropores for ultrafast sodium storage10.1016/j.carbon.2020.07.008 ↗
35. High‐yield Ti3C2 Tx MXene‐MoS2 integrated circuits
36. One MAX phase, different MXenes: a guideline to understand the crucial role of etching conditions on Ti3C2Tx surface chemistry10.1016/j.apsusc.2020.147209 ↗
37. Review on comprehending and enhancing the initial Coulombic efficiency of anode materials in lithium-ion/sodium-ion batteries10.1016/j.nanoen.2020.105143 ↗
38. Graphene wrapped FeSe2 nano-microspheres with high pseudocapacitive contribution for enhanced Na-ion storage
39. An expanded sandwich-like heterostructure with thin FeP nanosheets@graphene via charge-driven self-assembly as high-performance anodes for sodium ion battery10.1039/D2NR00691J ↗
40. Ultrathin MoS2 Nanosheets@Metal organic framework-derived N-doped carbon nanowall arrays as sodium ion battery anode with superior cycling life and rate capability10.1002/adfm.201702116 ↗
41. Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
42. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
43. Ti3C2Tx MXene conductive layers supported bio-derived Fex−1Sex/MXene/carbonaceous nanoribbons for high-performance half/full sodium-ion and potassium-ion batteries10.1002/adma.202101535 ↗
44. Lithium-diffusion induced capacity losses in lithium-based batteries10.1002/adma.202108827 ↗
45. Understanding and improving the initial Coulombic efficiency of high-capacity anode materials for practical sodium ion batteries10.1016/j.ensm.2019.05.008 ↗