journal article·2023-07

Wrapping 2D layered VSe2 nanoplates in 3D carbon nanotube network for high-rate and long-cycling sodium storage capability in ether electrolytes

Jun Xu, Maijie Zhang, Fang Cao, Xiaoyi Chen, Xing Chen, Junwei Chen, Yan Zhang, Jian Zhang, Wenpei Kang

Publisher page

Abstract

The layered transition metal diselenides are promising anode materials for sodium ion batteries, attributed to their large interlayer spacing and decent capacities. It is still a challenge to achieve long-term cycling and high-rate capability because of the serious volume effects and unsatisfied conductivity. In this work, the hierarchical architectures consisting of VSe 2 nanoplates wrapped into the carbon nanotubes network (VSe 2 /CNT) are prepared through a simple hydrothermal method. Benefiting from the high conductivity and the structure protection of CNT network and the abundant Se vacancy in VSe 2, the reaction kinetics and structure stability of the VSe 2 /CNT anode are significantly enhanced for sodium storage. Consequently, a discharge capacity of 170 mAh g −1 can be maintained over 10000 cycles at 2.0 A g −1 with a low capacity decay rate of 0.0048% per cycle, and a high capacity of 167 mAh g −1 is achieved at 100 A g −1 for the rate performance. Moreover, combinational modulations of electrolyte and electrode can take a synergetic influence on the electrochemical behaviors. The ether-based electrolyte has a lower stable overpotential, which promotes fast sodium storage. The CNT network passivation can suppress the “under-voltage failure” phenomenon, thereby providing superior cycling stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Carbon/lithium composite anode for advanced lithium metal batteries: design, progress, in situ characterization, and perspectives10.1002/aenm.202201493 ↗
2. High‐energy lithium ion batteries: recent progress and a promising future in applications
3. Toward practical high-energy and high-power lithium battery anodes: present and future
4. Confronting the challenges in lithium anodes for lithium metal batteries
5. Sodium and sodium-ion batteries: 50 years of research10.1002/aenm.201703137 ↗
6. Research development on sodium-ion batteries10.1021/cr500192f ↗
7. Molybdenum chalcogenides based anode materials for alkali metal ions batteries: beyond lithium ion batteries10.1016/j.ensm.2022.05.031 ↗
8. Progress in electrolyte and interface of hard carbon and graphite anode for sodium‐ion battery
9. High capacity anode materials for rechargeable sodium‐ion batteries10.1149/1.1393348 ↗
10. Embedding anatase TiO2 nanoparticles into holely carbon nanofibers for high-performance sodium/lithium ion batteries10.1016/j.jallcom.2022.166943 ↗
11. Homogenous sdiophilic MoS2/nitrogen-doped carbon nanofibers to stabilize sodium deposition for sodium metal batteries10.1016/j.ensm.2022.09.015 ↗
12. Ultrahigh line-capacity and flexible graphene/carbon nanotube/tin oxide fibers as sodium ion battery anodes10.1016/j.ensm.2022.03.002 ↗
13. Metal selenides anode materials for sodium ion batteries: synthesis, modification, and application
14. Band gap energies of semiconducting sulphides and selenides10.1016/S0921-5107(98)00193-7 ↗
15. Metal selenides for high performance sodium ion batteries10.1016/j.cej.2019.122557 ↗
16. Application of highly stretchable and conductive two-dimensional 1T VS2 and VSe2 as anode materials for Li-, Na- and Ca-ion storage10.1016/j.commatsci.2019.01.018 ↗
17. Pulverization-tolerance and capacity recovery of copper sulfide for high-performance sodium storage
18. Highly sodiophilic, defect‐rich, lignin‐derived skeletal carbon nanofiber host for sodium metal batteries10.1002/aenm.202103904 ↗
19. Vanadium‐modified hard carbon spheres with sufficient pseudographitic domains as high‐performance anode for sodium‐ion batteries
20. An encapsulation-based sodium storage via Zn-single-atom implanted carbon nanotubes
21. Photonic split-second induced mesoporous TiO2-Graphene architectures for efficient sodium-ion batteries10.1016/j.carbon.2021.03.028 ↗
22. Te-doping induced C@MoS2-xTex@C nanocomposites with improved electronic structure as high-performance anode for sodium-based dual-ion batteries10.1016/j.jpowsour.2022.231462 ↗
23. Solution synthesis of VSe2 nanosheets and their alkali metal ion storage performance10.1016/j.nanoen.2018.08.035 ↗
24. Coupling of metallic VSe2 and conductive polypyrrole for boosted sodium-ion storage by reinforced conductivity within and outside10.1021/acsnano.2c00169 ↗
25. Flexible electrode constructed by encapsulating ultrafine VSe2 in carbon fiber for quasi-solid-state sodium ion batteries10.1016/j.jpowsour.2020.228438 ↗
26. A rough endoplasmic reticulum-like VSe2/rGO anode for superior sodium-ion capacitors10.1039/C9QI00809H ↗
27. A simple synthesis of VSe2/B4C@HCG composite as high-performance anodes for sodium-ion batteries10.1016/j.jallcom.2022.168111 ↗
28. Hexagonal VS2 anchored MWCNTs: first approach to design flexible solid-state symmetric supercapacitor device10.1021/acsami.7b13908 ↗
29. One‐pot hydrothermal synthesis of ZnS nanospheres anchored on 3D conductive MWCNTs networks as high‐rate and cold‐resistant anode materials for sodium‐ion batteries10.1002/celc.202000204 ↗
30. Porous MoS2/carbon spheres anchored on 3D interconnected multiwall carbon nanotube networks for ultrafast Na storage
31. Structural phase transition of multilayer VSe210.1021/acsami.0c04449 ↗
32. Mechanistic insight into ultrafast kinetics of sodium cointercalation in few-layer graphitic carbon10.1021/acs.nanolett.2c02177 ↗
33. Nanohybrid engineering of the vertically confined marigold structure of rGO-VSe2 as an advanced cathode material for aqueous zinc-ion battery10.1016/j.jallcom.2021.160704 ↗
34. Dual regulation of metal doping and adjusting cut-off voltage for MoSe2 to achieve reversible sodium storage10.1002/smll.202200437 ↗
35. Improved Na storage and Coulombic efficiency in TiP2O7@C microflowers for sodium ion batteries10.1007/s12274-020-3057-5 ↗
36. Selenium vacancy-rich and carbon-free VSe2 nanosheets for high-performance lithium storage10.1039/D0NR00801J ↗
37. Ionic‐conducting and robust multilayered solid electrolyte interphases for greatly improved rate and cycling capabilities of sodium ion full cells
38. Unraveling the voltage failure mechanism in metal sulfide anodes for sodium storage and improving their long cycle life by sulfur‐doped carbon protection
39. Direct tracking of the polysulfide shuttling and interfacial evolution in all-solid-state lithium–sulfur batteries: a degradation mechanism study10.1039/C9EE00578A ↗
40. Activated carbon derived from cherry flower biowaste with a self-doped heteroatom and large specific surface area for supercapacitor and sodium-ion battery applications10.1016/j.chemosphere.2022.135290 ↗
41. Transformation of two-dimensional iron sulfide nanosheets from FeS2 to FeS as high-rate anodes for pseudocapacitive sodium storage10.1021/acsaem.0c02590 ↗
42. Multiple active sites of carbon for high-rate surface-capacitive sodium-ion storage10.1002/anie.201908159 ↗
43. Graphene oxide‐template controlled cuboid‐shaped high‐capacity VS4 nanoparticles as anode for sodium‐ion batteries
44. Aliovalent doping engineering enables multiple modulations of FeS2 anodes to achieve fast and durable sodium storage10.1039/D2TA06401D ↗
45. Embedding amorphous MoS within hierarchical porous carbon by facile one-pot synthesis for superior sodium ion storage10.1016/j.jechem.2022.08.008 ↗
46. Hierarchical MoS2–NiS nanosheet-based nanotubes@N-doped carbon coupled with ether-based electrolytes towards high-performance Na-ion batteries10.1039/D1TA08719C ↗
47. Ethers illume sodium‐based battery chemistry: uniqueness, surprise, and challenges10.1002/aenm.201801361 ↗
48. Ether-based electrolytes for sodium ion batteries10.1039/D1CS00948F ↗
49. Role of electrolyte in stabilizing hard carbon as an anode for rechargeable sodium-ion batteries with long cycle life10.1016/j.ensm.2021.07.021 ↗
50. Achieving superb sodium storage performance on carbon anodes through an ether-derived solid electrolyte interphase10.1039/C6EE03367A ↗
51. Extending the low-temperature operation of sodium metal batteries combining linear and cyclic ether-based electrolyte solutions10.1038/s41467-022-32606-4 ↗
52. Marriage of an ether-based electrolyte with hard carbon anodes creates superior sodium-ion batteries with high mass loading10.1021/acsami.8b15274 ↗
53. A highly reversible room-temperature sodium metal anode10.1021/acscentsci.5b00328 ↗
54. Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes10.1038/s41560-021-00910-w ↗
55. Characteristics of glyme electrolytes for sodium battery: nuclear magnetic resonance and electrochemical study10.1016/j.electacta.2017.02.007 ↗
56. Stable and unstable diglyme-based electrolytes for batteries with sodium or graphite as electrode10.1021/acsami.9b06760 ↗
57. Stable and unstable diglyme-based electrolytes for batteries with sodium or graphite as electrode10.1021/acsami.9b06760 ↗
58. Correlating kinetics to cyclability reveals thermodynamic origin of lithium anode morphology in liquid electrolytes10.1021/jacs.2c08182 ↗
59. Diglyme based electrolytes for sodium-ion batteries10.1021/acsaem.8b00360 ↗
60. Progress in electrolyte and interface of hard carbon and graphite anode for sodium‐ion battery10.1002/cey2.120 ↗
61. Improved electrochemical performance of sodium/potassium‐ion batteries in ether‐based electrolyte: cases study of MoS2@C and Fe7S8@C anodes
62. Evolution of the electrochemical interface in sodium ion batteries with ether electrolytes10.1038/s41467-019-08506-5 ↗