Gas diffusion electrode activity measurements of iridium-based self-supported catalysts produced by alternated physical vapour deposition
Source abstract
Abstract
The scarce supply of Ir used to catalyze the sluggish oxygen evolution reaction in acidic water electrolysis calls for unconventional approaches to design more active catalysts with minimal resource usage for their commercial scaling. Industrial-ready production methods and laboratory scale tests that can reflect the catalyst behaviour realistically need to be included in this process. In this work, we benchmarked three series of self-supported Ir–Co catalysts with low Ir loading produced by physical vapour deposition under relevant current densities in a gas diffusion electrode setup. It was seen that after selective acid leaching of the Co, a nanoporous structure with a high electrochemically active surface area and a mixed oxide and metallic character was formed. Depending on the initial Co:Ir deposition ratio over ten times higher oxygen evolution mass activities could be reached as compared to a commercial, unsupported IrOx nanoparticle catalyst used as a benchmark in the same setup configuration. The presented integrative catalyst design and testing strategy will help to facilitate bridging the gap between research and application for the early introduction of next-generation catalysts for water splitting.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Advanced battery technologies research · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Enhanced energy storage of lead-free mixed oxide core double-shell barium strontium zirconate titanate@magnesium aluminate@zinc oxide-boron trioxide-silica ceramic nanocomposites10.1007/s42114-022-00509-z ↗
2. Three-dimensional printing of the copper sulfate hybrid composites for supercapacitor electrodes with ultra-high areal and volumetric capacitances10.1007/s42114-022-00430-5 ↗
3. Sandwich-like CoMoP2/MoP heterostructures coupling N, P co-doped carbon nanosheets as advanced anodes for high-performance lithium-ion batteries10.1007/s42114-022-00535-x ↗
4. Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors10.1007/s42114-021-00358-2 ↗
5. Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review10.1007/s42114-022-00500-8 ↗
6. Planetary boundaries analysis of low-carbon ammonia production routes10.1021/acssuschemeng.1c01915 ↗
7. 2021
8. 2020
9. The investment costs of electrolysis – a comparison of cost studies from the past 30 years10.1016/j.ijhydene.2017.11.115 ↗
10. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
11. Self-supported nanostructured iridium-based networks as highly active electrocatalysts for oxygen evolution in acidic media10.1039/C9TA12796H ↗
12. Recommended practices and benchmark activity for hydrogen and oxygen electrocatalysis in water splitting and fuel cells10.1002/adma.201806296 ↗
13. Matthey 2022 · 2022
14. Synergetic effect of Ni-Au bimetal nanoparticles on urchin-like TiO2 for hydrogen and arabinose co-production by glucose photoreforming10.1007/s42114-022-00580-6 ↗
15. Systematic investigation of iridium-based bimetallic thin film catalysts for the oxygen evolution reaction in acidic media10.1021/acsami.9b13697 ↗
16. Ultrafine IrNi bimetals encapsulated in zeolitic imidazolate frameworks-derived porous N-doped carbon for boosting oxygen evolution in both alkaline and acidic electrolytes
17. Enhanced photocatalytic performance for hydrogen production and carbon dioxide reduction by a mesoporous single-crystal-like TiO2 composite catalyst
18. Reducing iridium loading in oxygen evolution reaction electrocatalysts using core-shell particles with nitride cores10.1021/acscatal.7b04410 ↗
19. Balancing activity, stability and conductivity of nanoporous core-shell iridium/iridium oxide oxygen evolution catalysts10.1038/s41467-017-01734-7 ↗
20. IrO2 coated TiO2 core-shell microparticles advance performance of low loading proton exchange membrane water electrolyzers
21. Exceptional hydrogen storage achieved by screening nearly half a million metal-organic frameworks10.1038/s41467-019-09365-w ↗
22. Progress of nonprecious-metal-based electrocatalysts for oxygen evolution in acidic media10.1002/adma.202003786 ↗
23. A hierarchical graphitic carbon nitride supported by metal–organic framework and copper nanocomposite as a novel bifunctional catalyst with long-term stability for enhanced carbon dioxide photoreduction under solar light irradiation10.1007/s42114-022-00459-6 ↗
24. Two-dimensional ultrathin networked CoP derived from Co(OH)2 as efficient electrocatalyst for hydrogen evolution10.1007/s42114-022-00455-w ↗
25. The gas diffusion electrode setup as straightforward testing device for proton exchange membrane water electrolyzer catalysts10.1021/jacsau.1c00015 ↗
26. Sputtered platinum thin-films for oxygen reduction in gas diffusion electrodes: a model system for studies under realistic reaction conditions10.3390/surfaces2020025 ↗
27. Elucidating Pt-based nanocomposite catalysts for the oxygen reduction reaction in rotating disk electrode and gas diffusion electrode measurements10.1021/acscatal.1c01496 ↗
28. Carbon nanotubes supported oxygen reduction reaction catalysts: role of inner tubes10.1007/s42114-022-00592-2 ↗
29. Efficient synthesis of sulfur-modified cobalt hydroxide self-supported electrocatalysts for enhanced oxygen evolution10.1007/s42114-022-00495-2 ↗
30. Mixed-phase cobalt-based nanosheets prepared by rapid thermal annealing for oxygen evolution catalysis10.1007/s42114-022-00537-9 ↗
31. Steel mesh reinforced Ni(OH)2 nanosheets with enhanced oxygen evolution reaction performance
32. Boron-tethering and regulative electronic states around iridium species for hydrogen evolution10.1002/adfm.202113191 ↗
33. Fabrication of catalytic compositions for electrodes of fuel cells and water electrolyzers with proton-exchange membrane by magnetron sputtering of composite targets10.1134/S2635167621040078 ↗
34. Support-free nanostructured Pt–Cu electrocatalyst for the oxygen reduction reaction prepared by alternating magnetron sputtering10.1016/j.jpowsour.2018.12.044 ↗
35. Self-supported Pt–CoO networks combining high specific activity with high surface area for oxygen reduction10.1038/s41563-020-0775-8 ↗
36. Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells10.1039/C4EE02144D ↗
37. On the limitations in assessing stability of oxygen evolution catalysts using aqueous model electrochemical cells10.1038/s41467-021-22296-9 ↗
38. The stability number as a metric for electrocatalyst stability benchmarking10.1038/s41929-018-0085-6 ↗
39. Capabilities and limitations of rotating disk electrodes versus membrane electrode assemblies in the investigation of electrocatalysts10.1038/s41929-022-00776-5 ↗
40. OER catalyst stability investigation using RDE technique: a stability measure or an artifact?10.1149/2.0301908jes ↗
41. Benchmarking high surface area electrocatalysts in a gas diffusion electrode: measurement of oxygen reduction activities under realistic conditions10.1039/C8EE00019K ↗
42. Evaluating electrocatalysts at relevant currents in a half-cell: the impact of Pt loading on oxygen reduction reaction10.1149/2.0911915jes ↗
43. The gas diffusion electrode setup as a testing platform for evaluating fuel cell catalysts: a comparative RDE‐GDE study
44. Benchmarking fuel cell electrocatalysts using gas diffusion electrodes: inter-lab comparison and best practices10.1021/acsenergylett.1c02659 ↗
45. Activity and durability of iridium nanoparticles in the oxygen evolution reaction10.1149/2.0151611jes ↗
46. Electrochemical water oxidation with cobalt-based electrocatalysts from pH 0-14: the thermodynamic basis for catalyst structure, stability, and activity10.1021/ja205647m ↗
47. Cobalt complexes and le Chatelier10.1021/ed061p466 ↗
48. Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces10.1038/nmat1840 ↗
49. Sputtered iridium oxide films as electrocatalysts for water splitting via PEM electrolysis10.1016/j.electacta.2006.11.005 ↗
50. Magnetron sputtered thin-film vertically segmented Pt-Ir catalyst supported on TiC for anode side of proton exchange membrane unitized regenerative fuel cells10.1016/j.ijhydene.2019.04.216 ↗
51. Ir-surface enriched porous Ir-Co oxide hierarchical architecture for high performance water oxidation in acidic media10.1021/am5027192 ↗
52. Nanoporous multimetallic Ir alloys as efficient and stable electrocatalysts for acidic oxygen evolution reactions10.1016/j.jcat.2020.11.038 ↗
53. Evolution of nanoporosity in dealloying10.1038/35068529 ↗
54. Volume change during the formation of nanoporous gold by dealloying10.1103/PhysRevLett.97.035504 ↗
55. Electrocatalysis on bimetallic surfaces: modifying catalytic reactivity for oxygen reduction by voltammetric surface dealloying10.1021/ja0742784 ↗
56. Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells10.1039/C4EE02144D ↗
57. In situ study of nanoporosity evolution during dealloying AgAu and CoPd by grazing-incidence small-angle X-ray scattering10.1021/acs.jpcc.1c09592 ↗
58. Approaches for measuring the surface areas of metal oxide electrocatalysts for determining their intrinsic electrocatalytic activity10.1039/C8CS00848E ↗
59. Insight on Tafel slopes from a microkinetic analysis of aqueous electrocatalysis for energy conversion10.1038/srep13801 ↗
60. Is scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDS) quantitative?10.1002/sca.21041 ↗
61. Development of an iridium dissolution method for the evaluation of potential radiological device materials10.1007/s10967-015-4381-1 ↗
62. Microwave digestion and alkali fusion procedures for the determination of the platinum-group elements and gold in geological materials by ICP-MS10.1016/0009-2541(95)00021-D ↗
63. Coupling of a scanning flow cell with online electrochemical mass spectrometry for screening of reaction selectivity10.1063/1.4896755 ↗
64. Electrochemical active surface area determination of iridium-based mixed oxides by mercury underpotential deposition10.1002/celc.202100649 ↗