Analysis on the influence of crack structure on MPL transmission properties
Source abstract
Abstract
Microcracks in micro porous layer(MPL) have influence on the liquid water and gas transport properties. A 3D MPL model was developed and Cracks at different depths and different horizontal inclination angles were added, and then the single-phase LBM model was used to simulate the liquid water transport process in the reconstructed MPL. Studies have shown that liquid water will reach a higher flow velocity in the cracks and larger interconnected gaps in the MPL. When the porosity is same, the permeability of MPL without cracks is 34.7% higher than the average permeability of the MPL with cracks in different depths. The permeability when the cracks appear on the side of the MPL is also greater than that in the interior and varies with the crack depth like a cosine function. For the different horizontal inclination angle of the crack, the permeability and the flow velocity of liquid water in the crack will increase correspondingly with the increase of the horizontal inclination angle. When the crack begins to perforate the MPL, the permeability increases significantly, forming a stable drainage channel. Some valuable discoveries were found which could provide some effective basis for structural and performance improvements of the fuel cell.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Lattice Boltzmann Simulation Studies · Nanopore and Nanochannel Transport Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
2. Optimal catalyst layer structure of polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2011.05.073 ↗
3. Understanding the role of cathode structure and property on water management and electrochemical performance of a PEM fuel cell10.1016/j.ijhydene.2013.06.130 ↗
4. Simultaneous neutron imaging of six operating PEFCs: experimental set-up and study of the MPL effect10.1016/j.elecom.2012.03.038 ↗
5. Effect of carbon loading in microporous layer on PEM fuel cell performance10.1016/j.jpowsour.2006.09.020 ↗
6. Fuel cells-fundamentals and applications10.1002/1615-6854(200105)1:1<5::AID-FUCE5>3.0.CO;2-G ↗
7. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
8. Characterization of interfacial morphology in polymer electrolyte fuel cells: micro-porous layer and catalyst layer surfaces10.1016/j.jpowsour.2009.11.032 ↗
9. Degradation of gas diffusion layers through repetitive freezing10.1016/j.apenergy.2011.07.011 ↗
10. Flow properties of an intact MPL from nano-tomography and pore network modelling10.1016/j.fuel.2014.07.040 ↗
11. Effects of anode microporous layers made of carbon powder and nanotubes on water transport in direct methanol fuel cells10.1016/j.jpowsour.2009.01.099 ↗
12. Development of a porosity-graded micro porous layer using thermal expandable graphite for proton exchange membrane fuel cells10.1016/j.renene.2013.02.025 ↗
13. Enhancing the properties of water and gas management for proton exchange membrane fuel cells via tailored intersected cracks in a microporous layer10.1016/j.jpowsour.2022.231402 ↗
14. Numerical simulation of liquid water transport in perforated cracks of microporous layer10.1016/j.energy.2022.125372 ↗
15. Structure majorization on the surface of microporous layer in polymer electrolyte membrane fuel cells to optimize performance and durability10.1016/j.enconman.2021.114319 ↗
16. Design and development of gas diffusion layers with pore forming agent for proton exchange membrane fuel cells at various relative humidity conditions10.1016/j.ijhydene.2020.11.187 ↗
17. Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell10.1016/j.jpowsour.2007.11.080 ↗
18. Synchrotron radiography and tomography of water transport in perforated gas diffusion media10.1016/j.jpowsour.2013.02.014 ↗
19. The influence of porous transport layer modifications on the water management in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2013.01.085 ↗
20. Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC10.1016/j.elecom.2011.03.033 ↗
21. Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells10.1016/S0378-7753(02)00028-9 ↗
22. Two-phase flow dynamics in a gas diffusion layer - gas channel - microporous layer system10.1016/j.jpowsour.2020.228427 ↗
23. Improving water management in fuel cells through microporous layer modifications: fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
24. Observation of dynamic liquid water transport in the microporous layer and gas diffusion layer of an operating PEM fuel cell by high-resolution soft X-ray radiography10.1016/j.jpowsour.2012.11.140 ↗
25. Liquid transport in gas diffusion layer of proton exchange membrane fuel cells: effects of micro-porous layer cracks10.1016/j.ijhydene.2021.11.248 ↗
26. Electrochemical durability of gas diffusion layer under simulated proton exchange membrane fuel cell conditions10.1016/j.ijhydene.2009.07.085 ↗
27. The effects of gas diffusion layers structure on water transportation using X-ray computed tomography based Lattice Boltzmann method10.1016/j.jpowsour.2017.12.016 ↗
28. A multi-scale approach to material modeling of fuel cell diffusion media10.1016/j.ijheatmasstransfer.2010.12.003 ↗
29. Two-phase flow in the mixed-wettability gas diffusion layer of proton exchange membrane fuel cells10.1016/j.apenergy.2018.09.209 ↗
30. Lattice Boltzmann modeling of transport phenomena in fuel cells and flow batteries10.1007/s10409-017-0667-6 ↗
31. Evaluation of porosity and thickness on effective diffusivity in gas diffusion layer10.1016/j.jpowsour.2016.12.052 ↗
32. Computational prediction of nanoscale transport characteristics and catalyst utilization in fuel cell catalyst layers by the lattice Boltzmann method10.1016/j.electacta.2018.04.138 ↗
33. Determination of the anisotropic permeability of a carbon cloth gas diffusion layer through X-ray computer micro-tomography and single-phase lattice Boltzmann simulation10.1002/fld.2378 ↗
34. Modeling fluid flow in the gas diffusion layers in PEMFC using the multiple relaxation‐time lattice Boltzmann method10.1002/fuce.201000074 ↗
35. Theoretical examination of effective oxygen diffusion coefficient and electrical conductivity of polymer electrolyte fuel cell porous components10.1016/j.jpowsour.2016.07.107 ↗
36. Mohamad · 2011
37. Lattice Boltzmann model for the incompressible Navier–Stokes equation10.1023/B:JOSS.0000015179.12689.e4 ↗
38. On pressure and velocity boundary conditions for the lattice Boltzmann BGK model10.1063/1.869307 ↗
39. Lattice Boltzmann simulation of co-existing boiling and condensation phase changes in a confined micro-space10.1016/j.ijheatmasstransfer.2018.05.139 ↗
40. Effects of the electrical resistances of the GDL in a PEM fuel cell10.1016/j.jpowsour.2006.04.106 ↗
41. A model for strain-induced permeability anisotropy in deformable granular media10.1139/t02-088 ↗
42. Lattice Boltzmann simulation of liquid water transport in microporous and gas diffusion layers of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2014.12.044 ↗
43. Coupled LBM–DEM micro-scale simulations of cohesive particle erosion due to shear flows10.1007/s11242-015-0500-2 ↗