On the interfacial properties of the garnet-type electrolyte ceramic pellets of cubic Li6.4La3Zr1.4Ta0.6O12: A comprehensive improvement of the sintering additive of Li-ion conducting LiCl
Source abstract
Abstract
The garnet-type Li fast ion conductor of cubic Li 6.4La 3Zr 1.4Ta 0.6O 12 (LLZTO) is one of the most promising solid-state electrolytes for safety-critical lithium-ion batteries, and the involved interfacial problems of LLZTO ceramic pellet must be alleviated prior to practical application. In this paper, the low-melting-point Li-ion conductor of LiCl is chosen as a sintering additive of LLZTO crystallites to address its positive effect on the structural properties of 1140°C-sintered LLZTO - x wt% LiCl (x = 0, 2, 4, 6 and/or 8). Through the physically filling into inter-particle gaps and chemically anchoring onto LLZTO particles` surface, an optimal mass fraction of LiCl (4 wt%) makes the resulting ceramic pellet to acquire a room-temperature ionic conductivity of 3.66 × 10 −4 S cm −1, and the corresponding Li–C/LLZTO - 4 wt% LiCl/Li–C or Li–C/LLZTO - 4 wt% LiCl/LiCoO 2 cell is endowed with a high critical current density (2.00 mA cm −2) or a good cycling stability at 20 mA g −1 within 2.5–4.2 V (e.g., discharge capacity - 124.4/91.1 mAh g −1, the 1st/100th cycle). Aside from these, a plausible mechanism of the agglutinant`s actions suggests an effective approach to the further development of LLZTO-based all-solid-state lithium-ion batteries in future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A.T.U.S. Univ. Of Texas, Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
2. Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives10.1039/c0cs00081g ↗
3. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
4. Building better batteries10.1038/451652a ↗
5. Solid-state Li-metal batteries: challenges and horizons of oxide and sulfide solid electrolytes and their interfaces
6. Design principles of the anode-electrolyte interface for all solid‐state lithium metal batteries10.1002/smtd.201900592 ↗
7. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
8. Consolidating the grain boundary of the garnet electrolyte LLZTO with Li3BO3 for high-performance LiNi0.8Co0.1Mn0.1O2/LiFePO4 hybrid solid batteries
9. Optimization of lithium content and sintering aid for maximized Li+ conductivity and density in Ta-doped Li7La3Zr2O1210.1111/jace.13578 ↗
10. Dopant‐dependent stability of garnet solid electrolyte interfaces with lithium metal10.1002/aenm.201803440 ↗
11. Effect of Si, in and Ge doping on high ionic conductivity of Li7La3Zr2O1210.1016/j.elecom.2012.04.032 ↗
12. Effect of substitution (Ta, Al, Ga) on the conductivity of Li7La3Zr2O1210.1016/j.jpowsour.2012.01.131 ↗
13. Effects of fluorine doping on structural and electrochemical properties of Li6.25Ga0.25La3Zr2O12 as electrolytes for solid-state lithium batteries10.1021/acsami.8b17656 ↗
14. First-principles studies on cation dopants and electrolyte|cathode interphases for lithium garnets10.1021/acs.chemmater.5b01023 ↗
15. High conductive yttrium doped Li7La3Zr2O12 cubic lithium garnet10.1016/j.elecom.2011.08.014 ↗
16. Ionic conductivity and air stability of Al-doped Li7La3Zr2O12 sintered in alumina and Pt crucibles10.1021/acsami.5b12186 ↗
17. Origin of the structural phase transition in Li7La3Zr2O12
18. Li3PO4-added garnet-type Li6.5La3Zr1.5Ta0.5O12 for Li-dendrite suppression10.1016/j.jpowsour.2017.04.026 ↗
19. Li6.75La3Zr1.75Ta0.25O12@amorphous Li3OCl composite electrolyte for solid state lithium-metal batteries10.1016/j.ensm.2018.02.015 ↗
20. Sintering additives for garnet-type electrolytes
21. Influence of La2Zr2O7 additive on densification and Li+ conductivity for Ta-doped Li7La3Zr2O12 garnet
22. La2Zr2O7 and MgO co-doped composite Li-Garnet solid electrolyte10.1016/j.jechem.2019.02.003 ↗
23. Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte10.1016/j.ensm.2019.01.018 ↗
24. Solid-state lithium battery chemistries achieving high cycle performance at room temperature by a new garnet-based composite electrolyte10.1016/j.jpowsour.2018.05.028 ↗
25. Preparation of dense Ta-LLZO/MgO composite Li-ion solid electrolyte: sintering, microstructure, performance and the role of MgO10.1016/j.jechem.2019.01.013 ↗
26. Influence of lithium oxide additives on densification and ionic conductivity of garnet-type Li6.75La3Zr1.75Ta0.25O12 solid electrolytes10.1016/j.ssi.2013.09.005 ↗
27. Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries10.1016/j.jpowsour.2018.04.019 ↗
28. All solid state lithium batteries based on lamellar garnet-type ceramic electrolytes10.1016/j.jpowsour.2015.09.061 ↗
29. Nanocomposite intermediate layers formed by conversion reaction of SnO2 for Li/garnet/Li cycle stability10.1016/j.jpowsour.2019.02.085 ↗
30. Drawing a soft interface: an effective interfacial modification strategy for garnet-type solid-state Li batteries10.1021/acsenergylett.8b00453 ↗
31. Lithium-graphite paste: an interface compatible anode for solid-state batteries
32. A semiliquid lithium metal anode10.1016/j.joule.2019.05.022 ↗
33. Garnet-based solid-state lithium fluoride conversion batteries benefiting from eutectic interlayer of superior wettability10.1021/acsenergylett.0c00383 ↗
34. Can we find solution to eliminate Li penetration through solid garnet electrolytes?10.1016/j.mtnano.2020.100075 ↗
35. Grain boundary modification to suppress lithium penetration through garnet-type solid electrolyte10.1016/j.jpowsour.2017.07.088 ↗
36. Influence of lithium phosphate on the structural and lithium-ion conducting properties of lithium aluminum titanium phosphate pellets10.1007/s11581-021-04011-2 ↗
37. Fast Li-ion transport pathways via 3D continuous networks in homogeneous garnet-type electrolyte for solid-state lithium batteries10.1016/j.ensm.2021.09.005 ↗
38. Lithium halide coating as an effective intergrain engineering for garnet-type solid electrolytes avoiding high temperature sintering10.1016/j.electacta.2018.08.079 ↗
39. Inorganic separators enable significantly suppressed polysulfide shuttling in high-performance lithium–sulfur batteries10.1039/C8TA07823H ↗
40. Electrochemical and surface chemistry analysis of lithium lanthanum zirconium tantalum oxide (LLZTO)/liquid electrolyte (LE) interfaces10.1016/j.jpowsour.2020.228598 ↗
41. Hysteresis mechanism in current-voltage characteristics of ZrOx films prepared by the sol-gel method10.1088/0022-3727/42/4/045419 ↗
42. Electrochemical and XPS studies of the passivation behavior of sputter-deposited Cr-Ta alloys in 12 M HCl10.1016/S0010-938X(98)00070-5 ↗
43. XPS-and-DFT analyses of the Pb 4f - Zn 3s and Pb 5d - O 2s overlapped ambiguity contributions to the final electronic structure of bulk and thin-film Pb-modulated zincite10.1016/j.apsusc.2017.01.310 ↗
44. XPS investigation of monatomic and cluster argon ion sputtering of tantalum pentoxide10.1016/j.apsusc.2017.02.006 ↗
45. XPS analyses of Ta/MgOx/Ni81Fe19/MgOx/Ta films10.1016/j.apsusc.2012.05.152 ↗
46. Mechanistic details of atomic layer deposition (ALD) processes for metal nitride film growth10.1016/j.molcata.2007.06.010 ↗
47. Surface chemistry of TaCl5 on polycrystalline Ta10.1016/S0039-6028(02)02685-7 ↗
48. Photocatalytic and electrically conductive transparent Cl-doped ZnO thin films via aerosol-assisted chemical vapour deposition10.1039/C8TA01420E ↗
49. A facile surface chemistry route to a stabilized lithium metal anode10.1038/nenergy.2017.119 ↗
50. Lithium phosphide/lithium chloride coating on lithium for advanced lithium metal anode10.1039/C8TA05102J ↗