journal article·2023-01Open access

Understanding the effects of operating conditions on the water management in anion exchange membrane fuel cells

Björn Eriksson, Pietro Giovanni Santori, Frédéric Lecoeur, Marc Dupont, Frédéric Jaouen

Abstract

While water management in Anion Exchange Membrane Fuel Cells (AEMFCs) is seen as crucial for performance and durability, measurements of water management within operating cells remain few. In this work, we measured the performance of an H2/O2 AEMFC based on a low-density polyethylene membrane AEM, PtRu/C anode and Fe-N-C cathode for various combinations of inlet relative humidities, gas pressures and flow rates. Simultaneously, the anode and cathode outlet relative humidities were measured using humidity sensors, from which the amount of water removed from the cell could be quantified for each side. The data shows that back-diffusion of water from anode to cathode results in increasing outlet relative humidity with increased current density, both at anode and cathode. Water produced in the AEMFC was thus removed from both sides. The maximum current density was found to be strongly connected to anode flooding, which is also the main cause for hysteresis during potentiodynamic scans. However, under atypical operating conditions, the cell performance may also be limited by low humidity at the cathode, with associated low ionomer conductivity. Overall, it is concluded that water management of AEMFC with thin AEMs can be achieved by playing with both the anode and cathode operating conditions
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. High-performing PGM-free AEMFC cathodes from carbon-supported cobalt ferrite nanoparticles10.3390/catal9030264 ↗
2. High performance FeNC and Mn-oxide/FeNC layers for AEMFC cathodes10.1149/1945-7111/abb7e0 ↗
3. Synergistic Mn-Co catalyst outperforms Pt on high-rate oxygen reduction for alkaline polymer electrolyte fuel cells10.1038/s41467-019-09503-4 ↗
4. Understanding how single-atom site density drives the performance and durability of PGM-free Fe-N-C cathodes in anion exchange membrane fuel cells
5. An efficient nickel hydrogen oxidation catalyst for hydroxide exchange membrane fuel cells10.1038/s41563-022-01221-5 ↗
6. Nickel-copper supported on a carbon black hydrogen oxidation catalyst integrated into an anion-exchange membrane fuel cell10.1039/C8SE00261D ↗
7. Editors' choice-examining performance and durability of anion exchange membrane fuel cells with novel spirocyclic anion exchange membranes10.1149/1945-7111/abf77f ↗
8. Achieving high-performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
9. Water - a key parameter in the stability of anion exchange membrane fuel cells10.1016/j.coelec.2018.03.019 ↗
10. Water limiting current measurements in anion exchange membrane fuel cells (AEMFCs); part 1: water limiting current method development10.1016/j.jpowsour.2022.231534 ↗
11. Understanding how high-performance anion exchange membrane fuel cells were achieved: component, interfacial, and cell-level factors10.1016/j.coelec.2018.11.010 ↗
12. Importance of balancing membrane and electrode water in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.05.006 ↗
13. Water uptake, ionic conductivity and swelling properties of anion-exchange membrane10.1016/j.jpowsour.2013.06.095 ↗
14. Probing anion exchange membrane fuel cell cathodes by varying electrocatalysts and electrode processing10.1149/1945-7111/ac4daa ↗
15. Along-the-Channel impacts of water management and carbon-dioxide contamination in hydroxide-exchange-membrane fuel cells: a modeling study10.1149/2.0171907jes ↗
16. Dekel · J. Power Sources · 2018 · 375 · 15810.1016/j.jpowsour.2017.07.117 ↗
17. A mini-review on anion exchange membranes for fuel cell applications: stability issue and addressing strategies10.1016/j.ijhydene.2015.04.040 ↗
18. Towards a consistent interpretation of electro-osmotic drag in polymer electrolyte membranes10.1002/fuce.201500210 ↗
19. Enhanced water transport in AEMs based on poly(styrene-ethylene-butylene-styrene) triblock copolymer for high fuel cell performance10.1039/C8PY01618F ↗
20. The effect of membrane thickness on AEMFC performance: an integrated theoretical and experimental study10.1016/j.enconman.2022.116203 ↗
21. Eriksson · Int. J. Hydrogen Energy · 2019 · 44 · 493010.1016/j.ijhydene.2018.12.185 ↗
22. Fuel cell evaluation of anion exchange membranes based on poly(phenylene oxide) with different cationic group placement10.1039/C9SE01143A ↗
23. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs10.1039/C8EE00122G ↗
24. Water permeation through anion exchange membranes10.1016/j.jpowsour.2017.05.030 ↗
25. Water movement in a solid-state alkaline fuel cell affected by the anion-exchange pore-filling membrane properties10.1021/jp405088s ↗
26. Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells10.1038/s41467-020-17370-7 ↗
27. Improvement in the solid-state alkaline fuel cell performance through efficient water management strategies10.1016/j.jpowsour.2017.01.111 ↗
28. Identification of catalytic sites for oxygen reduction in iron- and nitrogen-doped graphene materials10.1038/nmat4367 ↗
29. Radiation-grafted anion-exchange membranes: the switch from low- to high-density polyethylene leads to remarkably enhanced fuel cell performance10.1039/C9EE00331B ↗
30. Roizard · 2016 · 97
31. The importance of water transport in high conductivity and high-power alkaline fuel cells