Cell selection and thermal management system design for a 5C-rate ultrafast charging battery module
Source abstract
Abstract
In the pursuit of ultrafast charging electric vehicles, cell selection and thermal management play a critical role. This work explores the selection of a suitable battery cell, design of a battery module thermal management system, and thermal modelling of the cells and module. Four different cells are compared, each with unique characteristics that present advantages and disadvantages for ultrafast charging. The cells are first characterized in a lab, and their suitability for ultrafast charging is evaluated based on the experimental results. Factors such as charging efficiency and required cooling system size are also considered. Simplified thermal models are used for comparison of the different cells. A three-cell, liquid-cooled test module is designed and constructed for a selected cell, and detailed fluid and thermal models are developed for the module. Module temperatures at steady state and over time—during a series of fast charges and over a repeated driving and fast charge cycle—are simulated and compared to lab measurements. For a 5C charge, a peak temperature of 34.6 °C is measured in the lab, and modelled within 0.6 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Electric Vehicles and Infrastructure · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Making the case for electrified transportation10.1109/TTE.2015.2437338 ↗
2. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
3. A review of battery electric vehicle technology and readiness levels10.1016/j.rser.2017.03.138 ↗
4. Field · 2019
5. Lithium- air battery: Promise and challenges10.1021/jz1005384 ↗
6. European Commission · 2020
7. Lithium-ion battery fast charging: A review10.1016/j.etran.2019.100011 ↗
8. Hybrid - E.V. Committee · 2017
9. Lambert · 2017
10. Modelling the thermal behaviour of a lithium-ion battery during charge10.1016/j.jpowsour.2011.01.103 ↗
11. Thermal modeling and design considerations of lithium-ion batteries10.1016/S0378-7753(99)00178-0 ↗
12. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles10.1016/j.jpowsour.2005.08.049 ↗
13. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries10.1016/j.jpowsour.2018.09.069 ↗
14. Novel thermal management system design methodology for power lithium-ion battery10.1016/j.jpowsour.2014.07.169 ↗
15. Investigation of power battery thermal management by using mini-channel cold plate10.1016/j.enconman.2014.10.015 ↗
16. Design optimization of electric vehicle battery cooling plates for thermal performance10.1016/j.jpowsour.2011.06.090 ↗
17. Fast charging of an electric vehicle lithium-ion battery at the limit of the lithium deposition process10.1016/j.jpowsour.2019.04.047 ↗
18. Fast charging technique for high power lithium iron phosphate batteries: A cycle life analysis10.1016/j.jpowsour.2013.03.044 ↗
19. A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery module10.1016/j.applthermaleng.2021.117503 ↗
20. Design, development and thermal analysis of reusable Li-ion battery module for future mobile and stationary applications10.3390/en13061477 ↗
21. Advanced hybrid thermal management system for LTO battery module under fast charging10.1016/j.csite.2022.101938 ↗
22. Effects of material parameters on the thermal characteristics of a lithium ion battery under fast charging conditions10.1021/acs.energyfuels.0c03595 ↗
23. Avoiding thermal issues during fast charging starting with proper cell selection criteria10.1149/1945-7111/ac3348 ↗
24. 2015
25. Comparison of the state of lithium-sulphur and lithium-ion batteries applied to electromobility10.1016/j.jenvman.2018.08.008 ↗
26. High rate capability of Li(Ni1/3Mn1/3Co1/3)O2 electrode for Li-ion batteries10.1149/2.062204jes ↗
27. Modeling of low-temperature operation of a hybrid energy storage system with a butler-volmer equation based battery model
28. Lithium plating mechanism, detection, and mitigation in lithium-ion batteries10.1016/j.pecs.2021.100953 ↗
29. Energy storage systems for automotive applications10.1109/TIE.2008.918390 ↗
30. Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles10.1109/TPEL.2012.2212917 ↗
31. Novel thermal management system design methodology for power lithium-ion battery10.1016/j.jpowsour.2014.07.169 ↗
32. Battery entropic heating coefficient testing and use in cell-level loss modeling for extreme fast charging10.4271/2020-01-0862 ↗
33. Non-uniform effect on the thermal/aging performance of lithium-ion pouch battery10.1016/j.applthermaleng.2017.09.090 ↗
34. Current density and state of charge inhomogeneities in Li-ion battery cells with LiFePO4 as cathode material due to temperature gradients10.1016/j.jpowsour.2011.01.043 ↗
35. Wakefield-Vette, Inc. · 2020
36. Gesellschaft · 2010
37. Effect of thermal contact resistances on fast charging of large format lithium ion batteries10.1016/j.electacta.2014.04.134 ↗
38. Three-dimensional thermal modeling of a lithium-ion battery considering the combined effects of the electrical and thermal contact resistances between current collecting tab and lead wire10.1149/2.039303jes ↗
39. Two-equation eddy-viscosity turbulence models for engineering applications10.2514/3.12149 ↗
40. New equations for heat and mass transfer in turbulent pipe and channel flow
41. Li-ion battery model performance for automotive drive cycles with current pulse and EIS parameterization