journal article·2022-05

Cathode structural design enabling interconnected ionic/electronic transport channels for high-performance solid-state lithium batteries

Yingmin Jin, Xin Zong, Xuebai Zhang, Zhenggang Jia, Siping Tan, Yueping Xiong

Publisher page

Abstract

Great achievements have been accomplished for high performance solid-state electrolytes, however, the poor electrode/electrolyte interfacial contact severely impedes the development of solid-state lithium batteries (SSLBs). Herein, we design a 3D structural composite cathode based on cross-linked electrospun LiNi 0.5Co 0.2Mn 0.3O 2 (ES-NCM) network and ductile Li + conductive polymer electrolyte. Improved electrochemical kinetics and intimate interface are realized through infiltrating polymer precursor into ES-NCM network followed by in-situ polymerization. Assembled with Li 1.3Al 0.3Ti 1.7(PO 4) 3-polyvinylidene fluoride (LATP-PVDF) solid electrolyte, the composite ES-NCM ||LATP-PVDF || Li battery exhibits satisfactory electrochemical performance (with an initial discharge capacity of 143.2 mAh g −1 at 0.1C and a capacity retention of 74.0% after 80 cycles) since continuous Li +/e − conduction channels are generated by ES-NCM skeleton and Li + conductive polymer. Besides, the high areal capacity of 1.19 mAh cm −2 at a high ES-NCM loading of 9.28 mg cm −2 further supports the feasibility of our composite cathode design in the application of high energy-density SSLBs. Additionally, the flexible solid-state pouch cell exhibits excellent electrochemical performance (with a discharge capacity of 131.6 mAh g −1) and reliable safety characteristics under mechanical abuse. This work is anticipated to provide a new perspective in overcoming solid-solid contact issues in SSLBs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. All-solid-state lithium-ion and lithium metal batteries - paving the way to large-scale production10.1016/j.jpowsour.2018.02.062 ↗
2. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
3. Single-ion conducting polymer electrolytes for solid-state lithium-metal batteries: design, performance, and challenges10.1002/aenm.202003836 ↗
4. Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries10.1016/j.jpowsour.2018.04.019 ↗
5. Ultra-thin free-standing sulfide solid electrolyte film for cell-level high energy density all-solid-state lithium batteries10.1016/j.ensm.2021.03.017 ↗
6. Beyond garnets, phosphates and phosphosulfides solid electrolytes: new ceramic perspectives for all solid lithium metal batteries10.1016/j.jpowsour.2020.228949 ↗
7. Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries10.1039/C9EE03828K ↗
8. Fast Li+ conduction mechanism and interfacial chemistry of a NASICON/polymer composite electrolyte10.1021/jacs.9b12233 ↗
9. Enhanced surface interactions enable fast Li+ conduction in oxide/polymer composite electrolyte10.1002/anie.201914478 ↗
10. Recent advances in nanostructured electrode-electrolyte design for safe and next-generation electrochemical energy storage10.1016/j.mtnano.2019.100057 ↗
11. Rational design of an electron/ion dual-conductive cathode framework for high-performance all-solid-state lithium batteries10.1021/acsami.0c10463 ↗
12. Constructing electronic and ionic dual conductive polymeric interface in the cathode for high‐energy‐density solid‐state batteries10.1002/adfm.202008487 ↗
13. In-situ construction of stable cathode/Li interfaces simultaneously via different electron density azo compounds for solid-state lithium metal batteries10.1016/j.ensm.2021.05.035 ↗
14. Enabling high-areal-capacity all-solid-state lithium-metal batteries by tri-layer electrolyte architectures10.1016/j.ensm.2019.06.006 ↗
15. Factors affecting cyclic durability of all-solid-state lithium polymer batteries using poly(ethylene oxide)-based solid polymer electrolytes10.1039/c0ee00266f ↗
16. Boosting the performance of lithium batteries with solid-liquid hybrid electrolytes: interfacial properties and effects of liquid electrolytes10.1016/j.nanoen.2018.03.020 ↗
17. Enabling room-temperature solid-state lithium-metal batteries with fluoroethylene carbonate-modified plastic crystal interlayers10.1016/j.ensm.2018.08.021 ↗
18. Rational design of a composite electrode to realize a high-performance all-solid-state battery10.1002/cssc.201900010 ↗
19. Interface engineering on cathode side for solid garnet batteries10.1016/j.cej.2020.124089 ↗
20. Cathode supported solid lithium batteries enabling high energy density and stable cyclability10.1016/j.ensm.2020.11.038 ↗
21. Integrated interface strategy toward room temperature solid-state lithium batteries10.1021/acsami.8b02240 ↗
22. Low resistance-integrated all-solid-state battery achieved by Li7La3Zr2O12 nanowire upgrading polyethylene oxide (PEO) composite electrolyte and PEO cathode binder10.1002/adfm.201805301 ↗
23. Ameliorating the interfacial problems of cathode and solid‐state electrolytes by interface modification of functional polymers10.1002/aenm.201801528 ↗
24. Mitigating interfacial potential drop of cathode-solid electrolyte via ionic conductor layer to enhance interface dynamics for solid batteries10.1021/jacs.8b03319 ↗
25. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2016.10.007 ↗
26. Implications of cation-disordered grain boundaries on the electrochemical performance of the LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries10.1039/C8TA04731F ↗
27. Acacia gum-assisted co-precipitating synthesis of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries10.1007/s11581-015-1585-x ↗
28. Macroporous Li(Ni1/3Co1/3Mn1/3)O2: a high-power and high-energy cathode for rechargeable lithium batteries10.1002/adma.200600958 ↗
29. A free-standing Li1.2Mn0.54Ni0.13Co0.13O2/MWCNT framework for high-energy lithium-ion batteries10.1039/C8QI00926K ↗
30. 1D Nb-doped LiNi1/3Co1/3Mn1/3O2 nanostructures as excellent cathodes for Li-ion battery10.1016/j.electacta.2018.11.172 ↗
31. Impact of cathode material particle size on the capacity of bulk-type All-solid-state batteries10.1021/acsenergylett.8b00275 ↗
32. alpha-MoO3 nanobelts: a high performance cathode material for lithium ion batteries10.1021/jp108778v ↗
33. Nanowire electrodes for electrochemical energy storage devices10.1021/cr500177a ↗
34. Building a highly functional Li1.3Al0.3Ti1.7(PO4)3/poly (vinylidene fluoride) composite electrolyte for all-solid-state lithium batteries10.1016/j.jallcom.2021.159890 ↗
35. Compound-hierarchical-sphere LiNi0.5Co0.2Mn0.3O2: synthesis, structure, and electrochemical characterization10.1021/acsami.8b09985 ↗
36. Bifunctional in situ polymerized interface for stable LAGP‐based lithium metal batteries10.1002/admi.202100072 ↗
37. Poly(vinylene carbonate)-based composite polymer electrolyte with enhanced interfacial stability to realize high-performance room-temperature solid-state sodium batteries10.1021/acsami.9b11259 ↗
38. Low resistance and high stable solid–liquid electrolyte interphases enable high‐voltage solid‐state lithium metal batteries10.1002/adfm.202010611 ↗
39. Cyano-reinforced in-situ polymer electrolyte enabling long-life cycling for high-voltage lithium metal batteries10.1016/j.ensm.2021.01.017 ↗
40. Liu · ACS Energy Lett. · 2020 · 5 · 145610.1021/acsenergylett.0c00542 ↗
41. Liang · J. Am. Chem. Soc. · 2019 · 141 · 916510.1021/jacs.9b03517 ↗
42. Mesoscale chemomechanical interplay of the LiNi0.8Co0.15Al0.05O2 cathode in solid-state polymer batteries10.1021/acs.chemmater.8b04418 ↗
43. Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries10.1016/j.ensm.2020.01.006 ↗
44. Solvent‐Free synthesis of thin, flexible, nonflammable garnet‐based composite solid electrolyte for all‐solid‐state lithium batteries10.1002/aenm.201903376 ↗
45. Tailoring inorganic–polymer composites for the mass production of solid-state batteries10.1038/s41578-021-00320-0 ↗
46. 1D nanobar-like LiNi0.4Co0.2Mn0.4O2 as a stable cathode material for lithium-ion batteries with superior long-term capacity retention and high rate capability10.1039/C7TA02888A ↗
47. Structural evolution of NM (Ni and Mn) lithium-rich layered material revealed by in-situ electrochemical Raman spectroscopic study10.1016/j.jpowsour.2016.01.065 ↗
48. Ex situ and in situ Raman microscopic investigation of the differences between stoichiometric LiMO2 and high-energy xLi2MnO3.(1-x)LiMO2 (M = Ni, Co, Mn)10.1016/j.electacta.2014.03.004 ↗
49. Polyvinylpyrrolidone-induced uniform surface-conductive polymer coating endows Ni-rich LiNi0.8Co0.1Mn0.1O2 with enhanced cyclability for lithium-ion batteries10.1021/acsami.9b04050 ↗
50. A universal etching method for synthesizing high-performance single crystal cathode materials10.1016/j.nanoen.2021.106194 ↗
51. Hierarchical composite‐solid‐electrolyte with high electrochemical stability and interfacial regulation for boosting ultra‐stable lithium batteries10.1002/adfm.202006381 ↗
52. Synergetic effects of inorganic components in solid electrolyte interphase on high cycle efficiency of lithium ion batteries10.1021/acs.nanolett.5b05283 ↗
53. Interface stability in solid-state batteries10.1021/acs.chemmater.5b04082 ↗