Investigating design parameters of a perforated metal gas diffusion layer in a polymer electrolyte membrane fuel cell
Source abstract
Abstract
Abstract The effect of the metal-gas diffusion layer (M-GDL) on the performance of a proton exchange membrane fuel cell (PEMFC) was investigated by numerically simulating selected parameters. Even though the ability of the M-GDL to outperform the conventional GDL is well known, it is necessary to optimise the design parameters of the M-DGL. This is to address its inefficient gas and electron transport due to the inherent heterogeneous structure. This paper presents the use of numerical simulation to quantify (a) the effect of the size of the pores and (b) width of the frame comprising the structure of a porous M-GDL in a PEMFC. A mechanical – electrical – electrochemical – fluid dynamics coupling model was utilised for this study involving an isothermal and single-phase simulation. The best cell performance was estimated as 0.63 V at 1.5 A cm−2 with the optimised M-GDL design, under the fully humidified condition with 30 μm-thick Nafion. This constitutes a 9.4% improvement in cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. New materials for polymer electrolyte membrane fuel cell current collectors10.1016/S0378-7753(98)00264-X ↗
2. Innovative gas diffusion layers and their water removal characteristics in PEM fuel cell cathode10.1016/j.jpowsour.2007.03.042 ↗
3. Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—I. Control-oriented modeling10.1016/j.ijhydene.2006.02.031 ↗
4. Water management by material design and engineering for PEM fuel cells10.1149/1.2356236 ↗
5. 2008
6. The state of the art of electric and hybrid vehicles10.1109/5.989873 ↗
7. A review on PEM voltage degradation associated with water management: impacts, influent factors and characterization10.1016/j.jpowsour.2008.04.037 ↗
8. A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells10.1016/j.ijhydene.2009.09.017 ↗
9. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
10. Passive control of liquid water storage and distribution in a PEFC through flow-field design10.1016/j.jpowsour.2008.02.028 ↗
11. Direct measurement of current density under the land and channel in a PEM fuel cell with serpentine flow fields10.1016/j.jpowsour.2009.03.059 ↗
12. Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer10.1016/j.jpowsour.2004.11.035 ↗
13. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes10.1016/j.jpowsour.2006.03.077 ↗
14. Water uptake by and transport through Nafion® 117 membranes10.1149/1.2056194 ↗
15. Fuel cell electric vehicles and hydrogen infrastructure: status 201210.1039/c2ee22596d ↗
16. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
17. Papageorgopoulos · 2013
18. Significant performance improvement in terms of reduced cathode flooding in polymer electrolyte fuel cell using a stainless-steel microcoil gas flow field10.1016/j.jpowsour.2013.09.119 ↗
19. Corrugated mesh flow channel and novel microporous layers for reducing flooding and resistance in gas diffusion layer-less polymer electrolyte fuel cells10.1016/j.jpowsour.2014.04.159 ↗
20. Experimental and numerical modeling study of the electrical resistance of gas diffusion layer-less polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2014.12.077 ↗
21. Numerical and experimental study of the effects of the electrical resistance and diffusivity under clamping pressure on the performance of a metallic gas-diffusion layer in polymer electrolyte fuel cells10.1016/j.jpowsour.2016.08.121 ↗
22. Metal based gas diffusion layers for enhanced fuel cell performance at high current densities10.1016/j.jpowsour.2016.11.001 ↗
23. Investigation of a copper etching technique to fabricate metallic gas diffusion media10.1088/0960-1317/16/11/N02 ↗
24. Performance of a metallic gas diffusion layer for PEM fuel cells10.1016/j.jpowsour.2007.10.055 ↗
25. Perforated metal sheets as gas diffusion layers for proton exchange membrane fuel cells10.1149/2.017203esl ↗
26. Effects of the electrical resistances of the GDL in a PEM fuel cell10.1016/j.jpowsour.2006.04.106 ↗
27. Electron transport in PEFCs10.1149/1.1641036 ↗
28. Fluid flow through packed columns
29. Numerical study of assembly pressure effect on the performance of proton exchange membrane fuel cell10.1016/j.energy.2010.01.032 ↗
30. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle10.1016/j.jpowsour.2006.05.020 ↗
31. Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers10.1016/j.ijhydene.2011.05.152 ↗
32. Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution10.1016/j.jpowsour.2009.05.019 ↗
33. Selection of representative volume elements for pore-scale analysis of transport in fuel cell materials10.1016/j.jpowsour.2011.09.035 ↗
34. Microstructural analysis of mass transport phenomena in gas diffusion media for high current density operation in PEM fuel cells10.1016/j.jpowsour.2015.01.111 ↗
35. Measurements of pore size distribution, porosity, effective oxygen diffusivity, and tortuosity of PEM fuel cell electrodes10.1002/fuce.201200017 ↗
36. Thermal conductivity, electrical resistivity, and thermoelectric power of graphite10.1103/PhysRev.89.870 ↗
37. Catalyst layer cracks by buckling deformation of membrane electrode assemblies under humidity cycles and mitigation methods10.1016/j.jpowsour.2013.04.026 ↗
38. 1995
39. Development and application of a generalised steady-state electrochemical model for a PEM fuel cell10.1016/S0378-7753(99)00484-X ↗
40. Application of Butler–Volmer equations in the modelling of activation polarization for PEM fuel cells10.1016/j.jpowsour.2006.05.026 ↗
41. A computational model for assessing impact of interfacial morphology on polymer electrolyte fuel cell performance10.1016/j.jpowsour.2009.12.121 ↗
42. Temperature dependence of the electrode kinetics of oxygen reduction at the platinum/nafion® interface–A microelectrode investigation10.1149/1.2221258 ↗
43. Two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media10.1149/1.1938067 ↗
44. Understanding the gas diffusion layer in proton exchange membrane fuel cells. I. How its structural characteristics affect diffusion and performance10.1016/j.jpowsour.2013.09.090 ↗
45. Proton conductivity of Nafion 117 as measured by a four-electrode AC impedance method10.1149/1.1836625 ↗
46. Mench · 2008