journal article·2018-10

Joining of solid oxide fuel/electrolysis cells at low temperature: A novel method to obtain high strength seals already at 300 °C

Xiaoqing Si, Jian Cao, Ragnar Kiebach, Yu Xu, Huixia Xu, Belma Talic, Jicai Feng

Publisher page

Abstract

Abstract A novel method using a combination of surface three-dimensional structuring, silver nanoparticles and a silver-foam interlayer is developed for joining solid oxide fuel/electrolysis cell components at low temperature. Joints with a high mechanical strength of 24 MPa are obtained with this method already at 300 °C. The interfaces of a sealed assembly comprising ferritic stainless steel interconnect and nickel oxide-yttria stabilized zirconia (NiO-YSZ) support are analyzed by scanning electron microscopy and transmission electron microscopy to study the interfacial sintering mechanism. It is shown that the high strength of the joint is due to a combination of an optimized three-dimensional nickel/gold nanosheet array deposited on the substrates which facilitates mechanical interlocking, and a silver-foam interlayer which enhances the resistance to crack propagation. The long-term stability of the joint is evaluated by aging in a reducing atmosphere at 800 °C for 250 h. No defects indicating a possible failure are observed in the joint after this aging. An oxide layer forms along the silver/steel interface and parts of the steel are transformed to austenite due to nickel diffusion from the nanosheet array, but this does not deteriorate the joint stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · ZnO doping and properties · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Microstructural evolution of Ni-Yttria-stabilized zirconia solid oxide fuel cell anodes10.1016/j.actamat.2015.09.055 ↗
2. Progress in metal-support solid oxide fuel cells: a review10.1016/j.jpowsour.2010.02.035 ↗
3. Mechanical properties at the nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells10.1016/j.actamat.2009.12.036 ↗
4. Fuel cell materials and components10.1016/j.actamat.2003.08.004 ↗
5. A new symmetric solid-oxide fuel cell with La0.8Sr0.2Sc0.2Mn0.8O3-δ perovskite oxide as both the anode and cathode10.1016/j.actamat.2008.10.047 ↗
6. Sealants for solid oxide fuel cells10.1016/j.jpowsour.2005.05.002 ↗
7. Novel compressive mica seals with metallic interlayers for solid oxide fuel cell applications10.1111/j.1151-2916.2003.tb03408.x ↗
8. High-temperature seals for solid oxide fuel cell (SOFC)10.1361/105994906X117224 ↗
9. A novel SOFC/SOEC sealing glass with a low SiO2 content and a high thermal expansion coefficient10.1149/07801.1739ecst ↗
10. A Ba-free sealing glass with a high coefficient of thermal expansion and excellent interface stability optimized for SOFC/SOEC stack applications
11. Fracture and creep of glass-ceramic solid oxide fuel cell sealant materials10.1016/j.jpowsour.2013.08.010 ↗
12. Glass-ceramics seals in the system MgO-BaO-B2O3-SiO2 operation under simulated SOFC conditions10.1016/j.ijhydene.2016.07.051 ↗
13. An alkali-free barium borosilicate viscous sealing glass for solid oxide fuel cells10.1016/j.jpowsour.2014.07.088 ↗
14. Interface reactions between sealing glass and metal interconnect under static and dynamic heat treatment conditions10.1115/1.4032337 ↗
15. Mechanical properties of solid oxide fuel cell glass-ceramic sealants in the system BaO/SrO-MgO-B2O3-SiO210.1016/j.jeurceramsoc.2017.03.054 ↗
16. Reactive air brazing for sealing mixed ionic electronic conducting hollow fibre membranes10.1016/j.actamat.2015.01.029 ↗
17. Transient porous nickel interlayers for improved silver-based solid oxide fuel cell braze10.1016/j.actamat.2018.01.061 ↗
18. Reactive-element-free, silver-based brazes for SOFC applications10.1149/07801.1759ecst ↗
19. Reactive air brazing of YSZ-electrolyte and Al2O3-substrate for gas sensor sealing: interfacial microstructure and mechanical properties10.1016/j.ijhydene.2017.01.105 ↗
20. An Ag based brazing system with a tunable thermal expansion for the use as sealant for solid oxide cells10.1016/j.jpowsour.2016.03.030 ↗
21. Interfacial microstructure and shear strength of reactive air brazed oxygen transport membrane ceramic-metal alloy joints10.1007/s12540-017-7160-4 ↗
22. Aging behavior of reactive air barzed seals for SOFC10.1002/fuce.201400192 ↗
23. Mechanical performance of reactive-air-braze (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature10.1016/j.jpowsour.2008.10.117 ↗
24. Reinforcement of Ag nanoparticle paste with nanowires for low temperature pressureless bonding10.1007/s10853-012-6624-7 ↗
25. Joining of silver nanomaterials at low temperature: process, properties, and applications10.1021/acsami.5b02134 ↗
26. One-step fabrication of 3D nanohierarchical nickel nanomace array to sinter with silver NPs and the interfacial analysis10.1021/acsami.6b13031 ↗
27. Polymer-protected Cu-Ag mixed NPs for low-temperature bonding application10.1007/s11664-012-2008-7 ↗
28. Thermal characterization of Cu nanoparticle joints for power semiconductor devices10.1016/j.microrel.2013.07.042 ↗
29. Silver nanoparticle paste for low-temperature bonding of copper10.1007/s11664-011-1594-0 ↗
30. Simplification of low-temperature sintering nanosilver for power electronics packaging10.1007/s11664-013-2561-8 ↗
31. Self-limited plasmonic welding of silver nanowire junctions10.1038/nmat3238 ↗
32. Fabrication of 3D Ni nanosheet array on Crofer22APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs10.1016/j.ijhydene.2017.12.132 ↗
33. Comparative finite element analysis of the stress-strain states in three different boned solid oxide fuel cell seal designs10.1016/j.jpowsour.2008.01.093 ↗
34. Thermal stress analysis of planar solid oxide fuel cell stacks: effects of sealing design10.1016/j.jpowsour.2009.03.010 ↗
35. Thermal stress analysis of a planar SOFC stack10.1016/j.jpowsour.2006.10.089 ↗
36. Thermal-stress analysis of an operating planar solid oxide fuel cell with the bonded compliant seal design10.1016/j.ijhydene.2009.07.089 ↗
37. Active brazed Invar-SiO2f/SiO2 joint using a low-expansion composite interlayer10.1016/j.jmatprotec.2017.11.058 ↗
38. Formation behavior of reaction layer in Sn-3.0Ag-0.5Cu solder joint with addition of porous Cu interlayer10.1088/1757-899X/61/1/012020 ↗
39. Control interfacial microstructure and improve mechanical properties of TC4-SiO2f/SiO2 joint by AgCuTi with Cu foam as interlayer10.1016/j.ceramint.2016.07.084 ↗
40. Three-dimensional graphene-reinforced Cu foam interlayer for brazing C/C composites and Nb10.1016/j.carbon.2017.03.099 ↗
41. The braze joint between Al2O3 to 1Cr18Ni9Ti using a nickel foam10.1007/s40194-015-0224-5 ↗
42. Microstructural evolution and thermal stress relaxation of Al2O3/1Cr18Ni9Ti brazed joints with nickel foam10.1016/j.vacuum.2017.10.030 ↗
43. Long-term behavior of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800 °C10.1016/j.jpowsour.2014.07.189 ↗
44. Modeling of Ni diffusion induced austenite formation in ferritic stainless steel interconnects10.1149/2.1711709jes ↗
45. Diffusion of nickel into ferritic steel interconnect of solid oxide fuel/electrolysis stacks10.1149/05701.2245ecst ↗
46. Behavior of interconnect steels in carbon containing simulated anode gas of solid oxide fuel cells10.1149/2.033211jes ↗
47. Composite metal foams processed through powder metallurgy
48. A comparison of composite metal foam's properties and other comparable metal foams10.1016/j.matlet.2008.11.002 ↗
49. Lost carbonate sintering process for manufacturing metal foams10.1016/j.scriptamat.2004.10.012 ↗
50. Pressureless bonding process using Ag nanoparticle paste for flexible electronics packaging10.1016/j.scriptamat.2012.01.007 ↗
51. Evoulution behavior of Al2O3 nanoparticles reinforcements during reactive air brazing and its role in improving the joint strength10.1016/j.matdes.2017.07.002 ↗
52. Investigation of mechanical properties of aluminia nanoparticle-loaded hybrid glass/carbon-fiber-reinforced epoxy composites10.1002/app.39749 ↗
53. Nanoparticle-induced enhancement in fracture toughness of highly loaded epoxy composites over a wide temperature range10.1007/s10853-006-6219-2 ↗
54. Electrical and microstructural characterization of spinel phases as potential coatings for SOFC metallic interconnects10.1016/j.jpowsour.2005.03.137 ↗
55. Chemical interaction between glass-ceramic sealants and interconnect steels in SOFC stacks10.1016/j.jpowsour.2005.05.046 ↗
56. Damage and failure of silver based ceramic/metal joints for SOFC stacks10.1002/fuce.201200181 ↗
57. Recent results in Jülich solid oxide fuel cell technology development10.1016/j.jpowsour.2013.04.110 ↗
58. Long-term testing of SOFC stacks at Forschungszentrum Jülich10.1002/fuce.201200151 ↗
59. Long-term tests of a Jülich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes10.1016/j.ijhydene.2013.01.192 ↗
60. Ag-Cu-Ti braze materials for sealing SOFCs10.1115/1.2784279 ↗