journal article·2016-11

A two-dimensional modeling of solid oxide fuel cell button cells with detailed electrochemistry mechanism

Jingde Li, Zhengyu Bai, Eric Croiset

Publisher page

Abstract

Abstract A two-dimensional model of nickel/yttria-stabilized zirconia (Ni/YSZ) solid oxide fuel cell (SOFC) was developed for a button cell system. The model integrates the detailed catalytic, electrochemical elementary reactions with ionic/electronic conduction and multiple gas transport processes in SOFC. The model is validated using published experimental data for H 2 –H 2 O fuel gas under different cell sizes and operating conditions. The distributions of gas/surface phase species concentration and current density were predicted and the effects of operating temperature, fuel gas composition and fuel channel tube design on the cell performance were studied. The results show that the electrochemical reaction processes occurs mainly within a 20 μm distance from the anode/electrolyte interface and that the Ni catalyst surface is covered mainly by H(s). For the chamber channel design, the calculations show that the tube chamber should have a diameter no smaller than the cathode electrode to obtain the best SOFC performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Modeling solid oxide fuel cell operation: approaches, techniques and results10.1016/j.jpowsour.2005.11.045 ↗
2. Dynamic modeling of single tubular SOFC combining heat/mass transfer and electrochemical reaction effects10.1016/j.jpowsour.2004.11.023 ↗
3. A dynamic 1D model of a solid oxide fuel cell for real time simulation10.1016/j.jpowsour.2007.06.170 ↗
4. A hierarchical modeling approach to the simulation and control of planar solid oxide fuel cells10.1016/j.jpowsour.2008.02.021 ↗
5. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
6. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks10.1016/S0378-7753(02)00487-1 ↗
7. 3-D model calculation for planar SOFC10.1016/S0378-7753(01)00792-3 ↗
8. Numerical modeling of an anode-supported SOFC button, cell considering anodic surface diffusion10.1016/j.jpowsour.2006.10.091 ↗
9. A three-dimensional numerical model of a single-chamber solid oxide fuel cell10.1016/j.ijhydene.2009.07.113 ↗
10. Experimental and modeling study of solid oxide fuel cell operating with syngas fuel10.1016/j.jpowsour.2006.03.080 ↗
11. Direct methane fueled solid oxide fuel cell model with detailed reforming reactions10.1016/j.cej.2013.05.084 ↗
12. SOFC modeling considering electrochemical reactions at the active three phase boundaries10.1016/j.ijheatmasstransfer.2011.10.032 ↗
13. A new framework for physically based modeling of solid oxide fuel cells10.1016/j.electacta.2007.08.030 ↗
14. Modeling distributed charge-transfer processes in SOFC membrane electrode assemblies10.1149/1.2913152 ↗
15. Elementary reaction kinetic model of an anode-supported solid oxide fuel cell fueled with syngas10.1016/j.jpowsour.2009.10.051 ↗
16. Modeling electrochemical oxidation of hydrogen on Ni–YSZ pattern anodes10.1149/1.3148331 ↗
17. Theoretical modeling of air electrode operating in SOFC mode and SOEC mode: the effects of microstructure and thickness10.1016/j.ijhydene.2014.03.014 ↗
18. CFD analysis of a solid oxide fuel cell with internal reforming: coupled interactions of transport, heterogeneous catalysis and electrochemical processes10.1016/j.jpowsour.2006.08.017 ↗
19. Multi-scale electrochemical reaction anode model for solid oxide fuel cells10.1016/j.jpowsour.2012.02.077 ↗
20. Reformate-operated SOFC anode performance and degradation considering solid carbon formation: a modeling and simulation study10.1016/j.electacta.2014.07.136 ↗
21. Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells10.1016/j.apenergy.2009.11.013 ↗
22. Modelling and Ni/Yttria-Stabilized-Zirconia pattern anode experimental validation of a new charge transfer reactions mechanism for hydrogen electrochemical oxidation on solid oxide fuel cell anodes10.1016/j.jpowsour.2013.09.088 ↗
23. State-space modeling of the anodic SOFC system Ni, H2–H2O∣YSZ10.1016/S0167-2738(01)01004-9 ↗
24. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
25. Theory for the conductivity of nanoparticle-infiltrated SOFC electrode10.1149/05701.2763ecst ↗
26. A theoretical model for the electrical conductivity of core–shell nano-composite electrode of sofc10.1016/j.ssi.2013.11.046 ↗
27. Percolation theory to predict effective properties of solid oxide fuel-cell composite electrodes10.1016/j.jpowsour.2009.02.051 ↗
28. Combined micro-scale and macro-scale modeling of the composite electrode of a solid oxide fuel cell10.1016/j.jpowsour.2010.04.065 ↗
29. Theoretical models for effective electrical and electrochemical properties of nano-particle infiltrated electrode of solid oxide fuel cell10.1016/j.ijhydene.2014.01.081 ↗
30. Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model10.1149/1.2139954 ↗
31. Thin yttrium-stabilized zirconia electrolyte solid oxide fuel cells by centrifugal casting10.1111/j.1151-2916.2002.tb00588.x ↗
32. Limitations of charge-transfer models for mixed-conducting oxygen electrodes10.1016/S0167-2738(00)00423-9 ↗
33. SOFC modeling considering electrochemical reactions at the active three phase boundaries10.1016/j.ijheatmasstransfer.2011.10.032 ↗
34. Ni–YSZ gradient anodes for anode-supported SOFCs10.1016/j.jpowsour.2006.12.042 ↗
35. Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers10.1038/nenergy.2015.14 ↗