Grain boundary engineering simultaneously optimized thermoelectric and mechanical properties of BiSbTe alloys
Source abstract
Abstract
The Bi 2Te 3-based alloys with atomically layered structure are the best thermoelectric performance at the vicinity of room temperature. However, the inferior mechanical properties due to weak van der Waals interactions between layers are the obstacle to further promote the widespread commercialized application. Here, the grain refinement BiSbTe alloys prepared by ball milling and spark plasma sintering (grain boundary engineering) is reported. The microstructure characterization results indicate that ball milling can significantly reduce the grain size. The grain boundary engineering can significantly improve Seebeck coefficient about 23 %, maintain large hall mobility and reduce the carrier thermal conductivity about 48 %, and the lattice thermal conductivity is slightly decreased about 15 % by enhanced grain boundary phonon scattering. The highest average ZT reaches 1.2 in the range of 300–400 K for grain refinement sample, which is beneficial to improve the conversion efficiency of thermoelectric devices, and the Vickers hardness of the corresponding sample is increased by 58 %. The easy-to-operate strategy of grain refinement caused by ball milling provides a way to mass produce high performance and robust mechanical properties Bi 2Te 3-based thermoelectric devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Thermoelectric converter: strategies from materials to device application10.1016/j.nanoen.2021.106692 ↗
2. Structural design and performance optimization of Co/Bi0.5Sb1.5Te= artificially tilted multilayer thermoelectric devices10.1016/j.jpowsour.2024.234403 ↗
3. A review of CoSb3-based skutterudite thermoelectric materials10.1007/s40145-020-0407-4 ↗
4. Design of Bi2Te3-based thermoelectric generator in a widely applicable system10.1016/j.jpowsour.2023.232661 ↗
5. Enhanced thermoelectric and mechanical properties of zone melted p-type (Bi,Sb)2Te3 thermoelectric materials by hot deformation10.1016/j.actamat.2014.10.062 ↗
6. Synergistic optimization of the thermoelectric and mechanical properties of large-size Homogeneous Bi0.5Sb1.5Te3 bulk samples via carrier engineering for efficient energy harvesting10.1021/acsami.1c23736 ↗
7. Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys10.1063/1.3097026 ↗
8. High thermoelectric performance in Bi0.46Sb1.54Te3 nanostructured with ZnTe10.1039/C8EE00290H ↗
9. Significant enhancement of thermoelectric figure of merit in BiSbTe-based composites by incorporating carbon microfiber
10. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
11. High thermoelectric performance of p-Type Bi0.4Sb1.6Te3+x synthesized by plasma-assisted ball milling10.1021/acsami.2c16646 ↗
12. Leveraging deep levels in narrow bandgap leveraging deep levels in narrow bandgap Bi0.5Sb1.5Te3 for record-high zTave near room temperature10.1002/adfm.202005202 ↗
13. High efficiency Bi2Te3-based materials and devices for thermoelectric power generation between 100 and 300 °C10.1039/C6EE02017H ↗
14. Simultaneous optimization of electrical and thermal transport properties of Bi0.5Sb1.5Te3 thermoelectric alloy by twin boundary engineering10.1016/j.nanoen.2017.05.031 ↗
15. Synergistic modulation of mobility and thermal conductivity in (Bi,Sb)2Te3 towards high thermoelectric performance10.1039/C8EE03225D ↗
16. Microstructure and transport properties of copper-doped p-type BiSbTe alloy prepared by mechanical alloying and subsequent spark plasma sintering10.1016/j.jallcom.2013.05.228 ↗
17. Crystallographically textured nanomaterials produced from the liquid phase sintering of BixSb2- xTe3 nanocrystal building blocks10.1021/acs.nanolett.8b00263 ↗
18. Realizing high thermoelectric performance in Bi0.4Sb1.6Te3 nanosheets by doping Sn element10.1021/acsaem.2c02262 ↗
19. Point defect engineering: Co-doping synergy realizing superior performance in n-type Bi2Te3 thermoelectric materials10.1002/smll.202101328 ↗
20. Realizing record high performance in n-type Bi2Te3-based thermoelectric materials10.1039/D0EE01349H ↗
21. Enhanced thermoelectric performance of solution-derived bismuth telluride based nanocomposites via liquid-phase Sintering10.1016/j.nanoen.2016.10.056 ↗
22. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
23. Thermoelectric performance enhancement in BiSbTe alloy by microstructure modulation via cyclic spark plasma sintering with liquid phase10.1002/adfm.202009681 ↗
24. Achieving high thermoelectric performance in p-type BST/PbSe nanocomposites through the scattering engineering strategy10.1021/acsami.0c13542 ↗
25. Achieving high power factor of p-type BiSbTe thermoelectric materials via adjusting hot-pressing temperature10.1016/j.intermet.2017.10.015 ↗
26. Achieving high thermoelectric performance through constructing coherent interfaces and building interface potential barriers in n-type Bi2Te3/Bi2Te2.7Se0.3 nanocomposites10.1039/C9TA05798F ↗
27. Additive manufacturing of thermoelectric materials: materials, synthesis and manufacturing: a review10.1007/s10853-023-08953-y ↗
28. 3D-printed Bi2Te3-based thermoelectric generators for energy harvesting and temperature response10.1021/acsami.4c07013 ↗
29. Recent progress in 3D printing of Bi2Te3-based thermoelectric materials and devices
30. Ultrafast high-temperature sintering to avoid metal loss toward high-performance and scalable cermets10.1016/j.matt.2021.11.008 ↗
31. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
32. BiSbTe-based nanocomposites with high ZT:The effect of SiC nanodispersion on thermoelectric properties10.1002/adfm.201300146 ↗
33. Tuning multiscale microstructures to enhance thermoelectric performance of n-type Bismuth-Telluride-Based solid solutions10.1002/aenm.201500411 ↗
34. Enhancing the thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 modulated by the texture and dense dislocation networks10.1021/acsami.1c19172 ↗
35. Boron-mediated grain boundary engineering enables simultaneous improvement of thermoelectric and mechanical properties in n-type Bi2Te3
36. High thermoelectric performance of mechanically robust n-type Bi2Te3−xSex prepared by combustion synthesis10.1039/C5TA00470E ↗
37. Mechanically enhanced p- and n-type Bi2Te3-based thermoelectric materials reprocessed from commercial ingots by ball milling and spark plasma sintering10.1016/j.mseb.2015.03.011 ↗
38. Thermoelectric transport properties of bismuth telluride bulk materials fabricated by ball milling and spark plasma sintering10.1016/j.jallcom.2010.02.171 ↗
39. The effect of porosity and milling induced defects on the thermoelectric properties of p-Type Bi2Te3-Based bulks10.1002/adem.201600295 ↗
40. Effect of ball milling time on the thermoelectric properties of p-type (Bi,Sb)2Te310.1016/j.jallcom.2013.03.062 ↗
41. High-pressure synthesis and excellent thermoelectric performance of Ni/BiTeSe magnetic nanocomposites10.1039/C9TA13284H ↗
42. Magneto-enhanced electro-thermal conversion performance10.1007/s40843-021-1666-6 ↗
43. Porous bismuth antimony telluride alloys with excellent thermoelectric and mechanical properties10.1039/D0TA09795K ↗
44. Removing the oxygen-induced donor-like effect for high thermoelectric performance in n-type Bi2Te3-based compounds10.1021/acsami.1c19357 ↗
45. Unraveling the origin of donor‐like effect in bismuth–telluride‐based thermoelectric materials
46. Thermoelectric property studies on Cu-doped n-type CuxBi2Te2.7Se0.3 nanocomposites10.1002/aenm.201100149 ↗
47. Improved thermoelectric performance of silver nanoparticles-dispersed Bi2Te3 composites deriving from hierarchical two-phased heterostructure10.1002/adfm.201402663 ↗
48. Antisite defect manipulation enables the high thermoelectric performance of p-type Bi2-xSbxTe3 alloys for solid-state refrigeration
49. New insight into the material parameter B to understand the enhanced thermoelectric performance of Mg2Sn1−x−yGexSby10.1039/C5EE02600H ↗
50. Spark plasma sintered Bi-Sb-Te alloys derived from ingot scrap: maximizing thermoelectric performance by tailoring their composition and optimizing sintering time10.1016/j.nanoen.2021.106040 ↗
51. Improved thermoelectric properties of BiSbTe-AgBiSe2 alloys by suppressing bipolar excitation10.1021/acsaem.1c00388 ↗
52. Cu2Te incorporation-induced high average thermoelectric performance in p-Type Bi2Te3 alloys10.1021/acsami.2c13527 ↗