journal article·2024-07Open access

Co–Ni bimetallic selenides embedded in honeycomb carbon framework as multifunctional separator interlayer to enhance the electrochemical performance of Li–S batteries

Lie Liu, Ao Liao, Liang Lin, Youzhang Huang, Yinggan Zhang, Yuanyuan Liu, Guiyang Gao, Jie Lin, Baisheng Sa, Laisen Wang, Dong-Liang Peng, Qingshui Xie

Abstract

The commercialization of Li–S batteries is severely hampered by the electrically insulated nature of S and the discharge product Li 2 S, the shuttle effect of lithium polysulfides (LiPSs), and the slow redox kinetics between Li 2 S 2 /Li 2 S. Herein, a composite of Co–Ni bimetallic selenide nanoparticles embedded in honeycomb porous carbon (Co–Ni–Se@C) is prepared and used as a multifunctional interlayer on the separator to solve the above-mentioned challenges in Li–S batteries. The Co–Ni–Se@C composite with high electrical conductivity can not only accelerate Li + and electronic transfer but also have good chemisorption and catalytic activity for LiPSs, which can maximize the utilization of sulfur active material. As expected, Li–S batteries assembled with Co–Ni–Se@C-PP separator exhibit excellent electrochemical performance , including high initial discharge capacity of 1245 mAh g −1 at 0.2 C, superior long cycling stability with a 0.066 % decay per cycle at 1.0 C, and an excellent rate capacity of 674 mAh g −1 at 5.0 C. In addition, a satisfactory capacity of 1174 mAh g −1 is achieved with a high sulfur loading of 3.7 mAh g −1 and a low E/S ratio of 10 μL mg −1 . This work provides a new insight into the application of bimetallic selenides in high-performance Li–S batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
2. Advances in Li–S batteries10.1039/b925751a ↗
3. New approaches for high energy density lithium-sulfur battery cathodes10.1021/ar3001348 ↗
4. Hierarchically structured sulfur/carbon nanocomposite material for high-energy lithium battery10.1021/cm902050j ↗
5. Challenges and prospects of lithium-sulfur batteries10.1021/ar300179v ↗
6. Activating Li2S as the lithium-containing cathode in lithium–sulfur batteries10.1021/acsenergylett.0c00936 ↗
7. Quantitative investigation of polysulfide adsorption capability of candidate materials for Li-S batteries10.1016/j.ensm.2018.01.020 ↗
8. Amphiphilic surface modification of hollow carbon nanofibers for improved cycle life of lithium sulfur batteries10.1021/nl304795g ↗
9. Current status and future prospects of metal-sulfur batteries10.1002/adma.201901125 ↗
10. Implantable solid electrolyte interphase in lithium-metal batteries10.1016/j.chempr.2017.01.003 ↗
11. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
12. Nanofiber‐interlocked V2CTx hosts enriched with 3D lithiophilic and sulfophilic sites for long‐life and high‐Rate lithium–sulfur batteries
13. Cellulose fiber-enabled mitigation of polysulfide shuttling and dendritic lithium growth in lithium–sulfur batteries10.1016/j.jpowsour.2023.233595 ↗
14. Improving the electrochemical performance of lithium-sulfur batteries by interface modification with a bifunctional electrolyte additive10.1016/j.cej.2022.136489 ↗
15. A polyethylene glycol-supported microporous carbon coating as a polysulfide trap for utilizing pure sulfur cathodes in lithium-sulfur batteries10.1002/adma.201402893 ↗
16. Janus separator of polypropylene-supported cellular graphene framework for sulfur cathodes with high utilization in lithium-sulfur batteries10.1002/advs.201500268 ↗
17. Sulfur-impregnated, sandwich-type, hybrid carbon nanosheets with hierarchical porous structure for high-performance lithium-sulfur batteries10.1002/aenm.201301988 ↗
18. A graphene-pure-sulfur sandwich structure for ultrafast, long-life lithium-sulfur batteries10.1002/adma.201302877 ↗
19. Effective stabilization of a high-loading sulfur cathode and a lithium-metal anode in Li-S batteries utilizing SWCNT-modulated separators10.1002/smll.201502505 ↗
20. Encapsulated monoclinic sulfur for stable cycling of Li-S rechargeable batteries10.1002/adma.201303166 ↗
21. Highly efficient and green fabrication of a modified C nanofiber interlayer for high-performance Li-S batteries10.1039/C7TA09641K ↗
22. Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer10.1038/ncomms2163 ↗
23. High-Performance Li–S batteries with an ultra-lightweight MWCNT-coated separator10.1021/jz5006913 ↗
24. Understanding the catalytic kinetics of polysulfide redox reactions on transition metal compounds in Li–S Batteries10.1021/acsnano.2c08581 ↗
25. Origin and acceleration of insoluble Li2S2-Li2S reduction catalysis in ferromagnetic atoms-based lithium-sulfur battery cathodes
26. Recent advances in vacancy engineering for reliable lithium-sulfur batteries10.1007/s12598-023-02417-7 ↗
27. Hierarchically constructed ZnO/Co3O4 nanoheterostructures synergizing dendrite inhibition and polysulfide conversion in lithium–sulfur battery10.1021/acsmaterialslett.2c00266 ↗
28. Polyhedral TiO2 particle-based cathode for Li-S batteries with high volumetric capacity and high performance in lean electrolyte10.1016/j.cej.2020.125670 ↗
29. Optimizing inner voids in yolk-shell TiO2 nanostructure for high-performance and ultralong-life lithium-sulfur batteries10.1016/j.cej.2021.129241 ↗
30. α-MoO3 spheres as effective polysulfides adsorbent for high sulfur content cathode in lithium-sulfur batteries10.1016/j.jpowsour.2018.08.055 ↗
31. Facile synthesis of heterostructured MoS2–MoO3 nanosheets with active electrocatalytic sites for high-performance lithium–sulfur batteries10.1021/acsnano.1c09007 ↗
32. Fe3O4-decorated porous graphene interlayer for high-performance lithium–sulfur batteries10.1021/acsami.8b07316 ↗
33. Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance10.1016/j.nanoen.2017.05.009 ↗
34. Electrical-resistivity of CoS2 in the paramagnetic phase10.1016/0304-8853(83)90267-6 ↗
35. Self-templated formation of interlaced carbon nanotubes threaded hollow Co3S4 nanoboxes for high-rate and heat-resistant lithium-sulfur batteries10.1021/jacs.7b06973 ↗
36. Abundant Canadian pine with polysulfide redox mediating ZnS/CuS nanocomposite to attain high-capacity lithium sulfur battery10.1016/j.carbon.2022.04.013 ↗
37. The enhancement of polysulfide absorbsion in Li S batteries by hierarchically porous CoS2/carbon paper interlayer10.1016/j.jpowsour.2016.04.139 ↗
38. Design of ZnSe-CoSe heterostructure decorated in hollow N-doped carbon nanocage with generous adsorption and catalysis sites for the reversibly fast kinetics of polysulfide conversion10.1016/j.jechem.2023.07.007 ↗
39. Yolk-shell porous carbon spheres@CoSe2 nanosheets as multilayer defenses system of polysulfide for advanced Li-S batteries10.1016/j.cej.2020.127521 ↗
40. Metallic NiSe2 nanoarrays towards ultralong life and fast Li2S oxidation kinetics of Li–S batteries10.1039/C9TA03361K ↗
41. Identifying the evolution of selenium-vacancy-modulated MoSe2 precatalyst in lithium-sulfur chemistry10.1002/anie.202109291 ↗
42. Li intercalation in an MoSe2 electrocatalyst: in situ observation and modulation of its precisely controllable phase engineering for a high‐performance flexible Li‐S battery10.1002/cey2.255 ↗
43. Ionic-liquid-assisted synthesis of FeSe-MnSe heterointerfaces with abundant Se vacancies embedded in N, B Co-doped hollow carbon microspheres for accelerating the sulfur reduction reaction10.1002/adma.202204147 ↗
44. Highly sulfiphilic zinc selenide/carbon regulators for high-capacity and long-lifespan Li-S batteries10.1016/j.apsusc.2021.150952 ↗
45. Nitrogen-doped CoSe2 as a bifunctional catalyst for high areal capacity and lean electrolyte of Li-S battery10.1021/acsenergylett.0c01564 ↗
46. Conductive and catalytic triple-phase interfaces enabling uniform nucleation in high-rate lithium-sulfur batteries10.1002/aenm.201802768 ↗
47. Reduced graphene oxide@CoSe2 interlayer as anchor of polysulfides for high properties of lithium–sulfur battery10.1007/s10853-019-03571-z ↗
48. Metastable marcasite NiSe2 nanodendrites on carbon fiber clothes to suppress polysulfide shuttling for high-performance lithium–sulfur batteries10.1039/D1NR04879A ↗
49. Efficient Ni2Co4P3 nanowires catalysts enhance ultrahigh-loading lithium-sulfur conversion in a microreactor-like battery10.1002/adfm.201906661 ↗
50. Boosting polysulfide redox conversion of Li-S batteries by one-step-synthesized Co-Mo bimetallic nitride10.1016/j.jechem.2021.03.041 ↗
51. Elevated polysulfide regulation by an ultralight all-CVD-built ReS2@N-Doped graphene heterostructure interlayer for lithium–sulfur batteries10.1016/j.nanoen.2019.104190 ↗
52. Modulating of MoSe2 functional plane via doping-defect engineering strategy for the development of conductive and electrocatalytic mediators in Li-S batteries10.1016/j.jechem.2022.09.001 ↗
53. Ordered mesoporous carbon grafted MXene catalytic heterostructure as Li-ion kinetic pump toward high-efficient sulfur/sulfide conversions for Li–S battery10.1021/acsnano.2c11663 ↗
54. Finely-dispersed Ni2Co nanoalloys on flower-like graphene microassembly empowering a bi-service matrix for superior lithium-sulfur electrochemistry
55. Two birds with one stone: ammonium-induced carbon nanotube structure and low-crystalline cobalt nanoparticles enabling high performance of lithium-sulfur batteries10.3390/inorganics11070305 ↗
56. Heterostructured NiSe2/CoSe2 hollow microspheres as battery-type cathode for hybrid supercapacitors: electrochemical kinetics and energy storage mechanism10.1016/j.cej.2021.131328 ↗
57. (Co, Mn)-Doped NiSe2-diethylenetriamine (dien) nanosheets and (Co, Mn, Sn)-doped NiSe2 nanowires for high performance supercapacitors: compositional/morphological evolution and (Co, Mn)-induced electron transfer10.1039/C9NR04478G ↗
58. Trimetallic sulfide mesoporous nanospheres as superior electrocatalysts for rechargeable Zn–Air batteries10.1002/aenm.201801839 ↗
59. The role of selenium vacancies functionalized mediator of bimetal (Co, Fe) selenide for high-energy–density lithium-sulfur batteries10.1016/j.jcis.2023.01.090 ↗
60. Investigation of binary metal (Ni, Co) selenite as Li‐ion battery anode materials and their conversion reaction mechanism with Li ions10.1002/smll.201905289 ↗
61. Direct trapping and rapid conversing of polysulfides via a multifunctional Nb2O5-CNT catalytic layer for high performance lithium-sulfur batteries10.1016/j.carbon.2020.10.022 ↗
62. NiCo2O4 nanofibers as carbon‐free sulfur immobilizer to fabricate sulfur‐based composite with high volumetric capacity for lithium–sulfur battery
63. Yolk−shell nano ZnO@Co‐doped NiO with efficient polarization adsorption and catalysis performance for superior lithium−sulfur batteries
64. Ultrafine Co3Se4 nanoparticles in nitrogen‐doped 3D carbon matrix for high‐stable and long‐cycle‐life lithium sulfur batteries
65. Molecular perturbation of 2D organic modifiers on porous carbon interlayer: promoted redox kinetics of polysulfides in lithium-sulfur batteries10.1016/j.ensm.2021.05.027 ↗
66. Pyrrole derivatives as interlayer modifier of Li-S batteries: modulation of electrochemical performance by molecular perturbation10.1016/j.jechem.2022.08.014 ↗
67. Engineering the structural uniformity of gel polymer electrolytes via pattern‐guided alignment for durable, safe solid‐state lithium metal batteries10.1002/adma.202303460 ↗
68. Bipolar CoSe2 nanocrystals embedded in porous carbon nanocages as an efficient electrocatalyst for Li-S batteries10.1016/j.cej.2022.135820 ↗
69. Bifunctional catalytic effect of CoSe2 for lithium–sulfur batteries: single doping versus dual doping
70. Interfacial “single‐atom‐in‐defects” catalysts accelerating Li+ desolvation kinetics for long‐lifespan Lithium‐metal batteries
71. Accelerated Li+ desolvation for diffusion booster enabling low‐temperature sulfur redox kinetics via electrocatalytic carbon‐grazfted‐CoP porous nanosheets
72. Twinborn TiO2-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries10.1039/C7EE01430A ↗
73. Combined high catalytic activity and efficient polar tubular nanostructure in urchin-like metallic NiCo2Se4 for high-performance lithium-sulfur batteries
74. Efficient polysulfide barrier of a graphene aerogel–carbon nanofibers–Ni network for high-energy-density lithium–sulfur batteries with ultrahigh sulfur content10.1039/C8TA08048H ↗
75. Multifunctional LDH/Co9S8 heterostructure nanocages as high-performance lithium–sulfur battery cathodes with ultralong lifespan10.1016/j.ensm.2020.05.002 ↗
76. Core–shell MOF-derived N-doped yolk–shell carbon nanocages homogenously filled with ZnSe and CoSe2 nanodots as excellent anode materials for lithium- and sodium-ion batteries10.1039/C9TA01999E ↗