Agglomeration behavior of carbon-supported platinum nanoparticles in catalyst ink: modeling and experimental investigation
Source abstract
Abstract
Within catalyst inks, the agglomeration of carbon-supported Pt nanoparticles (Pt/C NPs) stands out as a primary destabilizing factor. This study simulates the agglomeration process of particles under varying ionic strengths (ISs), employing the Brownian motion of Pt/C NPs and inter-particle forces. The energy barriers (EBs) within particles govern particle interactions, subsequently translating into the adhesive efficiency of particle collisions ( α ). By modulating the ISs in Ink-P (IS = 0.00182), Ink-01 (IS = 0.01), and Ink-001 (IS = 0.001), the Zeta potential and EBs are diminished, thereby increasing α . Structural parameters of agglomerates during the agglomeration process, such as fractal dimension ( df) and porosity, are computationally assessed using Matlab. The simulated df for Ink-P, Ink-001, and Ink-01 are 1.82, 1.62, and 1.54, respectively, while the experimentally measured df are 1.92–1.95, 1.67–1.7, and 1.56–1.59, confirming the effectiveness of the simulation method. High α led to isotropic growth of agglomerates, resulting in higher df . Increased IS causes compression of the electric double layer and higher α , ultimately leading to rapid destabilization of the ink. This method not only enhances comprehension of nanoscale particle agglomeration, explaining variations in ink stability and agglomerate structures, but also broadens its applicability to diverse nanoparticle dispersion systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Carbon Nanotubes in Composites · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Stability and aggregation of metal oxide nanoparticles in natural aqueous matrices10.1021/es902987d ↗
2. Effects of material properties on sedimentation and aggregation of titanium dioxide nanoparticles of anatase and rutile in the aqueous phase10.1016/j.jcis.2011.06.085 ↗
3. Nanoparticle processing: understanding and controlling aggregation10.1016/j.cis.2020.102162 ↗
4. Effects of water chemistry on the destabilization and sedimentation of commercial TiO2 nanoparticles: role of double-layer compression and charge neutralization10.1016/j.chemosphere.2016.02.046 ↗
5. Review of analytical studies on TiO(2) nanoparticles and particle aggregation, coagulation, flocculation, sedimentation, stabilization10.1016/j.chemosphere.2018.08.108 ↗
6. Adsorption, aggregation and sedimentation of titanium dioxide nanoparticles and nanotubes in the presence of different sources of humic acids10.1016/j.scitotenv.2019.07.312 ↗
7. Aggregation kinetics of Multiwalled carbon nanotubes in aquatic systems: measurements and environmental implications10.1021/es801251c ↗
8. Fractal-like structures in colloid science10.1016/j.cis.2016.05.002 ↗
9. pH matters: the influence of the catalyst ink on the oxygen reduction activity determined in thin film rotating disk electrode measurements10.1016/j.jpowsour.2017.03.140 ↗
10. Evolution of the interfacial structure of a catalyst ink with the quality of the dispersing solvent: a contrast variation small-angle and ultrasmall-angle neutron scattering investigation10.1021/acsami.8b20645 ↗
11. Effect of light and temperature on zeta potential and physical stability in solid lipid nanoparticle (SLN™) dispersions10.1016/S0378-5173(98)00092-1 ↗
12. Influence of ionic strength, pH, and cation valence on aggregation kinetics of titanium dioxide nanoparticles10.1021/es802628n ↗
13. Effects of ink formulation on construction of catalyst layers for high-performance polymer electrolyte membrane fuel cells10.1021/acsami.1c06711 ↗
14. Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells10.1038/s41560-021-00824-7 ↗
15. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
16. Slot die coating window for a uniform fuel cell ink dispersion10.1002/aic.17719 ↗
17. A completely spray-coated membrane electrode assembly10.1016/j.elecom.2016.06.017 ↗
18. Effect of airbrush type on sprayed platinum and platinum-cobalt catalyst inks: benchmarking as PEMFC and performance in an electrochemical hydrogen pump10.1016/j.ijhydene.2020.06.292 ↗
19. New insights on the agglomeration and sedimentation behaviours of catalyst ink of proton exchange membrane fuel cells affected by ionomers concentration10.1016/j.jpowsour.2022.232427 ↗
20. Effects of ionomer and dispersion methods on rheological behavior of proton exchange membrane fuel cell catalyst layer ink10.1016/j.ijhydene.2020.07.241 ↗
21. Solvent effects on the rheology of fuel cell catalyst ink and the adsorption of ionomers on the particles10.1063/5.0102157 ↗
22. Recent progress of catalyst ink for roll-to-roll manufacturing paired with slot die coating for proton exchange membrane fuel cells
23. Suzuki · 2018 · 193
24. Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks10.1016/j.carbon.2020.07.047 ↗
25. Investigation of the interaction between nafion ionomer and surface functionalized carbon black using both ultrasmall angle X-ray scattering and cryo-TEM10.1021/acsami.6b12949 ↗
26. Investigation of the microstructure and rheology of iridium oxide catalyst inks for low-temperature polymer electrolyte membrane water electrolyzers10.1021/acsami.9b14415 ↗
27. Tuning the ionomer distribution in the fuel cell catalyst layer with scaling the ionomer aggregate size in dispersion10.1021/acsami.8b01751 ↗
28. Impact of catalyst layer morphology on the performance of PEM fuel cell cathode via lattice Boltzmann simulation10.1016/j.ijhydene.2018.09.076 ↗
29. The effect of solvent and ionomer on agglomeration in fuel cell catalyst inks: simulation by the Discrete Element Method10.1016/j.ijhydene.2019.09.012 ↗
30. Experimental and theoretical analysis of ink dispersion stability for polymer electrolyte fuel cell applications10.1149/2.0961706jes ↗
31. Elimelech · 1998
32. Investigation of nanoparticle agglomerates properties using Monte Carlo simulations10.1016/j.apt.2016.06.029 ↗
33. On techniques for the measurement of the mass fractal dimension of aggregates10.1016/S0001-8686(00)00078-6 ↗
34. Rationalizing catalyst inks for PEMFC electrodes based on colloidal interactions10.1149/05801.1409ecst ↗
35. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗
36. Attachment efficiency of nanoparticle aggregation in aqueous dispersions: modeling and experimental validation10.1021/es203623z ↗
37. Ionic strength dependence of aggregate size and morphology on polymer-clay flocculation10.1016/j.colsurfa.2017.06.085 ↗
38. pH, ionic strength and dissolved organic matter alter aggregation of fullerene C60 nanoparticles suspensions in wastewater10.1016/j.jhazmat.2012.10.056 ↗
39. Berg · 2010
40. A model to describe the settling behavior of fractal aggregates10.1006/jcis.2001.8028 ↗
41. Catalyst layer ink interactions that affect coatability10.1149/2.0191805jes ↗
42. Effect of dispersion medium composition and ionomer concentration on the microstructure and rheology of Fe-N-C platinum group metal-free catalyst inks for polymer electrolyte membrane fuel cells10.1021/acs.langmuir.0c02015 ↗
43. Controlling the microscopic morphology and permeability of catalyst layers in proton exchange membrane fuel cells by adjusting catalyst ink agglomerates10.1016/j.ijhydene.2021.06.216 ↗
44. Micro-structure evolution and control of lithium-ion battery electrode laminate10.1016/j.est.2017.09.016 ↗
45. Hindered settling velocity in particle-fluid mixture: a theoretical study using the entropy concept10.1061/(ASCE)HY.1943-7900.0001376 ↗
46. Hindered settling of coagulating suspensions10.1016/0032-5910(78)80109-0 ↗