journal article·2024-01

Investigation on enhancement of energy conversion of H2/CH4 fueled combustion in a micro tube with multi-channel-outlet

Feng Yan, Zhixin Huang, Hao Wang, Qingguo Peng, Fuqiang He

Publisher page

Abstract

To improve the flame stability and energy utilization of micro-generators, experimental and numerical investigations of a micro-thermophotovoltaic fueled by H 2/CH 4 are conducted. The coupling effects of multi-channel-outlet setting of micro tube and CH 4 addition on combustion characteristics and thermal performance are compared and analyzed. The results reveal that the multi-channel-outlet of the tube significantly enhances the flame stability of premixed H 2/CH 4 /air and the heat transmission via flow recirculation in the combustion chamber. It also notes that 2.5–10 % CH 4 addition effectively affects the flame regime and extends the high-temperature zone to obtain a higher radiation temperature. Burners with larger dimensions achieve a lower wall temperatures but attain a higher radiant power, which can be improved with the extension of the multi-channel-outlet length and burner size. And radiant power increases with increasing fuel flow rate, while energy efficiency is reduced. So, the burner with properly multi-channel-outlet setting and a small fraction of CH 4 addition is beneficial to improve system thermal performance. It especially obtains that the burner C6-12 has the highest radiant power of 39.6 W at Vf = 640 mL/min and 7.5 % CH4, and burner C6-20 achieves the highest radiant efficiency of 44.1 % at V f = 410 mL/min.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Combustion and flame dynamics · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Microscale combustion: technology development and fundamental research10.1016/j.pecs.2011.03.001 ↗
2. Experimental studies on a high performance thermoelectric system based on micro opposed flow porous combustor10.1016/j.enconman.2021.115157 ↗
3. A review of micro power system and micro combustion: present situation, techniques and prospects10.3390/en16073201 ↗
4. Numerical investigations on an improved dual-channel porous combustor fueled with lean methane for enhancing thermal performance10.1016/j.fuel.2021.122228 ↗
5. A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application10.1016/j.apenergy.2015.04.068 ↗
6. Micro-combustor performance enhancement by hydrogen addition in a combined baffle-bluff configuration10.1016/j.ijhydene.2018.03.016 ↗
7. Characterizing modal exponential growth behaviors of self-excited transverse and longitudinal thermoacoustic instabilities10.1063/5.0082617 ↗
8. Investigation of heat transfer characteristics of hydrogen combustion process in cylindrical combustors from microscale to mesoscale10.1016/j.ijhydene.2021.05.099 ↗
9. Porous media combustion for micro thermophotovoltaic system applications10.1016/j.apenergy.2009.06.039 ↗
10. Numerical study on the influence of controllable flow ratio on combustion characteristics of a controllable central slotted bluff body and cavity combined micro combustor10.1016/j.ijhydene.2020.11.117 ↗
11. Investigation on the effect of bluff body ball on the combustion characteristics for methane/oxygen in micro combustor10.1016/j.energy.2019.116465 ↗
12. A numerical study on non-premixed H2/air flame stability in a micro-combustor with a slotted bluff-body10.1016/j.ijhydene.2020.10.024 ↗
13. Effects of rectangular rib on exergy efficiency of a hydrogen-fueled micro combustor10.1016/j.ijhydene.2020.01.221 ↗
14. Thermal performance characteristics of a micro-combustor with swirl rib fueled with premixed hydrogen/air10.1016/j.ijhydene.2021.08.109 ↗
15. Effects of porosity setting and multilayers of diesel particulate filter on the improvement of regeneration performance10.1016/j.energy.2022.126063 ↗
16. Effects of influencing factors on premixed CH4-O2 combustion in a cylindrical porous media combustor10.1016/j.cep.2021.108320 ↗
17. Effect of inserted baffles on hydrogen heterogeneous reaction in planar catalytic micro combustor10.1016/j.ijhydene.2023.01.004 ↗
18. Numerical investigations on characteristics of methane catalytic combustion in micro-channels with a concave or convex wall cavity10.1016/j.enconman.2015.03.058 ↗
19. Enhancing heat transfer performance analyses of a hydrogen-fueled meso-combustor with staggered bluff-bodies10.1016/j.fuproc.2021.106867 ↗
20. Effects of number of air holes on flame and heat transfer characteristics in a multihole baffled combustor combined with micro-thermophotovoltaic and micro-thermoelectric systems10.1016/j.applthermaleng.2022.118180 ↗
21. Oxy-fuel combustion of methane in a swirl tubular flame burner under various oxygen contents: operation limits and combustion instability10.1016/j.expthermflusci.2017.09.001 ↗
22. Large-eddy simulations of self-excited thermoacoustic instability in a premixed swirling combustor with an outlet nozzle10.1063/5.0087055 ↗
23. Influence of multi-structure optimization on the comprehensive performance of micro-cylindrical combustor inserting with spiral fin by using grey relational analysis and analysis of variance10.1016/j.ijhydene.2021.06.077 ↗
24. Numerical study on combustion characteristics and heat transfer enhancement of the micro combustor embedded with Y-shaped fin for micro thermo-photovoltaic system10.1016/j.applthermaleng.2022.118427 ↗
25. Experimental and numerical investigation on H2-fueled thermophotovoltaic micro tube with multi-cavity10.1016/j.energy.2023.127325 ↗
26. Investigation on combustion characteristics and thermal performance of a three rearward-step structure micro combustor fueled by premixed hydrogen/air10.1016/j.renene.2022.01.019 ↗
27. Enhance the energy and exergy performance of hydrogen combustion by improving the micro-combustor outlet in thermofluidic systems10.1016/j.ijhydene.2020.11.114 ↗
28. Numerical study on a multiple-channel micro combustor for a micro-thermophotovoltaic system10.1016/j.enconman.2016.04.088 ↗
29. Stable flame limits for optimal radiant performance of porous media reactors for thermophotovoltaic applications using packed beds of alumina10.1016/j.apenergy.2018.08.048 ↗
30. Recent progress in flame stabilization technologies for combustion-based micro energy and power systems10.1016/j.fuel.2020.119391 ↗
31. Investigation of CH4 and porous media addition on thermal and working performance in premixed H2/air combustion for micro thermophotovoltaic10.1016/j.fuel.2023.127444 ↗
32. Role of hydrogen addition in propane/air flame characteristic and stability in a micro-planar combustor10.1016/j.fuproc.2021.106797 ↗
33. Experimental study on the electrospray and combustion characteristics of biodiesel-ethanol blends in a meso-scale combustor10.1016/j.energy.2019.05.024 ↗
34. Blowout limits of inclined nonpremixed turbulent jet flames10.1016/j.proci.2022.11.009 ↗
35. Combustion characteristics of premixed hydrogen/air flames in a geometrically modified micro combustor10.1016/j.fuel.2018.01.015 ↗
36. Application of clean gaseous fuels in compression ignition engine under dual fuel mode: a technical review and Indian perspective10.1016/j.jclepro.2021.128052 ↗
37. Numerical investigation of CH4/H2/air flame bifurcations in a micro flow reactor with controlled wall temperature profile10.1016/j.combustflame.2022.112070 ↗
38. H2 – CH4 blending fuels combustion using a cyclonic burner on colorless distributed combustion10.1016/j.ijhydene.2021.08.118 ↗
39. Experimental and numerical studies of the diluent influence (N2, Ar, He, Xe) on stable premixed methane flames in micro-combustion10.1016/j.proci.2020.06.325 ↗
40. Effect of dimethyl ether addition on flame stability of premixed methane/air in a micro-planar quartz combustor10.1016/j.cep.2019.107740 ↗
41. Flame characteristics of methane/air with hydrogen addition in the micro confined combustion space10.1016/j.ijhydene.2022.04.091 ↗
42. A comparative study on combustion characteristics of methane, propane and hydrogen fuels in a micro-combustor10.1016/j.ijhydene.2015.09.101 ↗
43. Two-dimensional simulation of premixed laminar flame at microscale10.1016/j.ces.2015.08.026 ↗
44. Improved emissions conversion of diesel oxidation catalyst using multifactor impact analysis and neural network10.1016/j.energy.2023.127048 ↗
45. Enhancing ammonia combustion with minimum hydrogen blended in presence of self-excited intermittent pulsating oscillations10.1063/5.0147474 ↗
46. Mechanism, performance and modification methods for NH3-SCR catalysts: a review10.1016/j.fuel.2022.125885 ↗
47. Thermal performances and emitter efficiency improvement studies on premixed micro-combustors with different geometric shapes for thermophotovoltaics applications
48. A modified micro reactor fueled with hydrogen for reducing entropy generation10.1016/j.ijhydene.2019.09.009 ↗
49. Investigation of thermal performance and energy conversion in a novel planar micro-combustor with four-corner entrances for thermo-photovoltaic power generators10.1016/j.jpowsour.2021.230625 ↗
50. Numerical study on energy conversion performance of micro-thermophotovoltaic system adopting a heat recirculation micro-combustor10.1016/j.fuproc.2018.07.034 ↗
51. Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air10.1016/j.energy.2018.07.034 ↗
52. Experimental investigation of blended H2/CH4 combustion in combustors with block for micro-thermophotovoltaic10.1016/j.fuel.2023.129869 ↗
53. Comprehensive numerical insight the thermal performance improvement of the micro combustors with internal bionic Y-shaped fins for micro-thermal voltaic system applications10.1016/j.fuel.2022.123610 ↗
54. Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates10.1016/j.ijhydene.2014.12.018 ↗
55. Thermo – photo – voltaic generator development10.1016/j.egypro.2014.01.017 ↗
56. Enhancing and assessing ammonia-air combustion performance by blending with dimethyl ether10.1016/j.rser.2021.112003 ↗
57. Properties of premixed hydrogen/propane/air flame in ceramic granular beds10.1016/j.ijhydene.2014.07.156 ↗
58. Effects of methane addition on laminar flame characteristics of premixed blast furnace gas/air mixtures10.1016/j.fuel.2021.121100 ↗
59. Entropy-involved energy measure study of intrinsic thermoacoustic oscillations10.1016/j.apenergy.2016.05.142 ↗
60. A comprehensive experimental characterisation of a novel porous media combustion-based thermophotovoltaic system with controlled emission10.1016/j.apenergy.2019.113721 ↗
61. Computational optimization of CH4/H2/CO blends in a spark-ignition engine using quasi-dimensional combustion model10.1016/j.fuel.2021.121281 ↗
62. Hydrogen/Oxygen premixed combustion characteristics in micro porous media combustor10.1016/j.egypro.2014.11.1081 ↗
63. Micro combustion in a porous media for thermophotovoltaic power generation10.1016/j.applthermaleng.2017.10.024 ↗
64. The numerical study of the energy and exergy efficiencies of the micro-combustor by the internal micro-fin for thermophotovoltaic systems10.1016/j.jclepro.2019.06.303 ↗
65. Combustion process and entropy generation in a novel microcombustor with a block insert10.1016/j.cej.2015.04.034 ↗
66. Comprehensive numerical investigations on the thermal performance of heat recirculating micro combustor with pin fins for micro-thermal voltaic system applications10.1016/j.ijhydene.2022.08.294 ↗
67. Flame stability analysis of premixed hydrogen/air mixtures in a swirl micro-combustor10.1016/j.energy.2020.118495 ↗
68. Effect of a crossed-semicircular-plate on thermal performance of micro-combustor fueled by premixed hydrogen-air mixture10.1016/j.ijhydene.2022.03.212 ↗
69. Thermal performances and emitter efficiency improvement studies on premixed micro-combustors with different geometric shapes for thermophotovoltaics applications10.1016/j.energy.2021.120298 ↗
70. Investigation on H2/CH4 blended combustion in a micro-tube with dual-inlet at varied operating conditions10.1016/j.fuel.2023.129228 ↗
71. Effects of flow rate and fuel/air ratio on propagation behaviors of diffusion H2/air flames in a micro-combustor10.1016/j.energy.2019.05.052 ↗