Ink droplet drying analysis for understanding the ink-catalyst layer transition in proton exchange membrane fuel cells
Source abstract
Abstract
There is still limited understanding of ink structure and the transition process from ink to the catalyst layer (CL) in proton exchange membrane fuel cells despite recent interest in the field. This study proposes a methodology for analyzing the CLs formed after drying single- and multi-ink droplets produced using an ultrasonic spray. Two model inks, Pt/Vulcan Carbon and Pt/Ketjen Black, are prepared using these catalysts, and their characteristics are analyzed through sedimentation behavior, ionomer adsorption quantification, and rheology. The structural properties of the spray-dried CLs are examined using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy-Auger electron spectroscopy. These analyses reveal distinct differences in the CLs` structures, influenced by physical phenomena such as coffee ring formation and droplet coalescence, which are dependent on the ink properties. Furthermore, the structural characteristics of the CLs produced by the two model inks affect the electrochemical behavior of the 25 cm 2 fuel cell. This study establishes a correlation between the ink structure, CL structure, and fuel cell performance, emphasizing the usefulness of the ultrasonic spray coating method in advancing such investigations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Advanced battery technologies research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Vertically aligned carbon nanotube electrodes for high current density operating proton exchange membrane fuel cells10.1016/j.jpowsour.2013.11.073 ↗
2. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
3. Ordered macroporous platinum electrode and enhanced mass transfer in fuel cells using inverse opal structure10.1038/ncomms3473 ↗
4. New evaluation method for the effectiveness of platinum/carbon electrocatalysts under operating conditions10.1016/j.electacta.2010.07.071 ↗
5. Hybrid approach combining multiple characterization techniques and simulations for microstructural analysis of proton exchange membrane fuel cell electrodes10.1016/j.jpowsour.2017.01.104 ↗
6. The key to high performance low Pt loaded electrodes10.1149/2.1621704jes ↗
7. Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells10.1038/s41563-019-0487-0 ↗
8. Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC10.1149/2.1251814jes ↗
9. Understanding inks for porous-electrode formation10.1039/C7TA07255D ↗
10. Catalyst layer ink interactions that affect coatability10.1149/2.0191805jes ↗
11. Current understanding of catalyst/ionomer interfacial structure and phenomena affecting the oxygen reduction reaction in cathode catalyst layers of proton exchange membrane fuel cells10.1016/j.coelec.2020.03.006 ↗
12. Multicomponent, multiphase interactions in fuel-cell inks
13. SANS studies on catalyst ink of fuel cell10.1002/app.39842 ↗
14. Nanostructure of a catalyst ink investigated by contrast-variation small-angle neutron scattering10.1149/09809.0447ecst ↗
15. Evolution of the interfacial structure of a catalyst ink with the quality of the dispersing solvent: a contrast variation small-angle and ultrasmall-angle neutron scattering investigation10.1021/acsami.8b20645 ↗
16. Investigation of the interaction between nafion ionomer and surface functionalized carbon black using both ultrasmall angle X-ray scattering and cryo-TEM10.1021/acsami.6b12949 ↗
17. Investigation of a catalyst ink dispersion using both ultra-small-angle X-ray scattering and cryogenic TEM10.1021/la1028228 ↗
18. Impact of catalyst ink dispersing methodology on fuel cell performance using in-situ X-ray scattering10.1021/acsaem.9b01037 ↗
19. Experimental and theoretical analysis of ink dispersion stability for polymer electrolyte fuel cell applications10.1149/2.0961706jes ↗
20. Rationalizing catalyst inks for PEMFC electrodes based on colloidal interactions10.1149/05801.1409ecst ↗
21. Impact of platinum primary particle loading on fuel cell performance: insights from catalyst/ionomer ink interactions10.1021/acsami.2c10499 ↗
22. Rheological investigation on the microstructure of fuel cell catalyst inks10.1021/acsami.8b15039 ↗
23. Effects of ionomer and dispersion methods on rheological behavior of proton exchange membrane fuel cell catalyst layer ink10.1016/j.ijhydene.2020.07.241 ↗
24. Sedimentation dynamics of colloidal formulations through direct visualization: implications for fuel cell catalyst inks10.1021/acsanm.0c01467 ↗
25. On the state and stability of fuel cell catalyst inks10.1016/j.apt.2021.08.030 ↗
26. Probing ionomer interactions with electrocatalyst particles in solution10.1021/acsenergylett.1c00866 ↗
27. Analysis of the microstructure formation process and its influence on the performance of polymer ElectrolyteFuel-cell catalyst layers10.1002/celc.201500131 ↗
28. Microstructural observation of fuel cell catalyst inks by Cryo-SEM and Cryo-TEM
29. Characterization of solvent-dependent ink structure and catalyst layer morphology based on ink sedimentation dynamics and catalyst-ionomer cast films10.1149/1945-7111/ac2c13 ↗
30. Investigating the effect of solvent composition on ink structure and crack formation in polymer electrolyte membrane fuel cell catalyst layers10.1007/s11814-023-1474-3 ↗
31. Studies on the thermal stability of the perfluorinated cation-exchange membrane NAFION-41710.1007/BF01912735 ↗
32. Thermal stability in air of Pt/C catalysts and PEM fuel cell catalyst layers10.1021/cm052660e ↗
33. Application of TGA techniques to analyze the compositional and structural degradation of PEMFC MEAs10.1016/j.polymdegradstab.2012.03.016 ↗
34. Formulation of carbon black-ionomer dispersions for thin film formation in fuel cells10.1016/j.partic.2018.08.001 ↗
35. Catalyst layer ink interactions that affect coatability10.1149/2.0191805jes ↗
36. Preparation procedure for the electrode slurries of polymer electrolyte fuel cells utilizing the irreversibility of ionomer adsorption onto PtC particles10.2109/jcersj2.19152 ↗
37. Molecular dynamics study of ionomer adsorption at a carbon surface in catalyst ink10.1016/j.electacta.2016.04.004 ↗
38. SANS studies on catalyst ink of fuel cell10.1002/app.39842 ↗
39. Characterization of catalyst inks by rheology and microscopic particle properties10.1149/08613.0193ecst ↗
40. Controlling cracking formation in fuel cell catalyst layers10.1016/j.jpowsour.2019.02.058 ↗
41. Understanding formation mechanism of heterogeneous porous structure of catalyst layer in polymer electrolyte fuel cell10.1016/j.ijhydene.2016.08.029 ↗
42. Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks10.1016/j.carbon.2020.07.047 ↗
43. Dispersion stability of single-walled carbon nanotubes using nafion in bisolvent10.1021/jp0670485 ↗
44. Kim · 2023
45. Particle flocculation by adsorbing polymers10.1016/0001-8686(91)80045-L ↗
46. Fellows · 2005
47. Theory of colloid depletion stabilization by unattached and adsorbed polymers10.1039/C5SM01365H ↗
48. Structure of adsorbed polymers on a colloid particle10.1021/ma060014a ↗
49. Depletion-induced phase separation in colloid-polymer mixtures10.1016/S0001-8686(02)00081-7 ↗
50. Rheology of carbon black suspensions. I. Three types of viscoelastic behavior10.1007/s00397-002-0278-3 ↗
51. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
52. Drying of thin colloidal films
53. Self-pinning by colloids confined at a contact line10.1103/PhysRevLett.110.028303 ↗
54. Crack formation and prevention in colloidal drops
55. Precision, accuracy, and uncertainty in quantitative surface analyses by Auger‐electron spectroscopy and x‐ray photoelectron spectroscopy10.1116/1.576956 ↗
56. Proton conduction and oxygen reduction kinetics in PEM fuel cell cathodes: effects of ionomer-to-carbon ratio and relative humidity10.1149/1.3143965 ↗
57. The effects of Nafion® ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method10.1016/j.ijhydene.2009.11.058 ↗
58. Ionomer content in the catalyst layer of polymer electrolyte membrane fuel cell (PEMFC): effects on diffusion and performance10.1016/j.ijhydene.2010.11.076 ↗
59. Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy10.1149/1.1888367 ↗
60. On the determination of PEM fuel cell catalyst layer resistance from impedance measurement in H2/N2 cells10.1149/2.007301jes ↗
61. Understanding platinum ionomer interface properties of polymer electrolyte fuel cells10.1149/1945-7111/ac774f ↗