journal article·2023-11

Nanostructured Mg-doped Mn–Cr spinel oxide cathodes for solid oxide fuel cells with optimized performance

Ben Ma, Zhaohui Chen, Zhuang Lin, Lin Cheng, Yingke Zhou

Publisher page

Abstract

The cathode properties are critical for solid oxide fuel cells (SOFCs) performance and a major challenge for commercialization. This study employs the impregnation method to produce uniformly distributed Mg-doped manganese-chromium spinel oxide nanoparticles infiltrated into a network on the Gd 0.1Ce 0.9O 1.95 (GDC) skeleton as SOFC cathodes. The effects of Mg doping on the performance of these nanostructured spinel oxides are investigated. Both experimental results and density functional theory (DFT) calculations demonstrate that Mg doping can optimize the electronic structure of the manganese-chromium spinel oxide, increase the oxygen vacancy concentration, and significantly enhance the electrical conductivity and oxygen reduction reaction (ORR) catalytic activity. The Mg-doped manganese-chromium spinel oxide cathode exhibits superior performance, with an area-specific polarization resistance of 0.33 Ω cm 2 and a maximum power density of 976 mW cm −2 at 800 °C. Moreover, the nanostructures of the cathode barely change after 100 h of cell operation. These findings provide a new strategy for optimizing the performance of SOFC spinel oxide cathodes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Materials for fuel-cell technologies10.1038/35104620 ↗
2. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
3. Surface segregation in solid oxide cell oxygen electrodes: phenomena, mitigation strategies and electrochemical properties10.1007/s41918-020-00078-z ↗
4. High performance zirconia-bismuth oxide nanocomposite electrolytes for lower temperature solid oxide fuel cells10.1016/j.jpowsour.2016.04.090 ↗
5. Development of lanthanum strontium cobalt ferrite perovskite electrodes of solid oxide fuel cells-a review10.1016/j.ijhydene.2019.01.212 ↗
6. Electrolyte bi-layering strategy to improve the performance of an intermediate temperature solid oxide fuel cell: a review10.1016/j.jpowsour.2018.02.003 ↗
7. Influence of strontium content on the oxygen surface exchange kinetics and oxygen diffusion in La1-xSrxCoO3–δ oxides10.1016/j.ssi.2019.115052 ↗
8. Density functional theory study on oxygen adsorption in LaSrCoO4: an extended cathode material for solid oxide fuel cells10.1016/j.apsusc.2011.11.050 ↗
9. Hydride reduced LaSrCoO4−δ as new cathode material for Ba(Zr0.1Ce0.7Y0.2)O3 based intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2011.10.121 ↗
10. Characterization of Ln0.8Sr0.2CoO3-δ (Ln=Gd, Nd, Pr, Sm, or Yb) as cathode materials for low-temperature SOFCs10.4191/KCERS.2006.43.12.758 ↗
11. Developing an ultrafine Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode for efficient solid oxide fuel cells10.1016/j.ceramint.2021.12.365 ↗
12. Effect of calcium doping on Sm1-xCaxBaCo2O5+δ cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2021.138830 ↗
13. Evaluation of Fe and Mn co-doped layered perovskite PrBaCo2/3Fe2/3Mn1/2O5+δ as a novel cathode for intermediate-temperature solid-oxide fuel cell10.1016/j.ceramint.2018.09.018 ↗
14. Enhanced oxygen reduction kinetics of IT-SOFC cathode with PrBaCo2O5+δ/Gd0.1Ce1.9O2−δ coherent interface10.1039/D1TA09615J ↗
15. A comparative study of surface segregation and interface of La0.6Sr0.4Co0.2Fe0.8O3-δ electrode on GDC and YSZ electrolytes of solid oxide fuel cells10.1016/j.ijhydene.2020.10.113 ↗
16. A review of the chemical compatibility between oxide electrodes and electrolytes in solid oxide fuel cells10.1016/j.jpowsour.2021.229630 ↗
17. Comprehensive review of chromium deposition and poisoning of solid oxide fuel cells (SOFCs) cathode materials10.1016/j.rser.2020.110320 ↗
18. A short review of cathode poisoning and corrosion in solid oxide fuel cell10.1016/j.ijhydene.2017.08.057 ↗
19. Performance degradation of double-perovskite PrBaCo2O5+δ oxygen electrode in CO2 containing atmospheres10.1016/j.apsusc.2017.03.298 ↗
20. Electrochemical performance of NiCo2O4 spinel cathodes for intermediate temperature solid oxide fuel cells
21. Electrode properties of CuBi2O4 spinel oxide as a new and potential cathode material for solid oxide fuel cells10.1016/j.jpowsour.2021.230447 ↗
22. Site-oriented design of spinel MgxNiMn2-xO4-δ as cathode material of intermediate-temperature direct ammonia solid oxide fuel cell10.1016/j.jpowsour.2021.230020 ↗
23. One-step synthesis of CuCo2O4-Sm0.2Ce0.8O1.9 nanofibers as high performance composite cathodes of intermediate-temperature solid oxide fuel cells10.1016/j.ijhydene.2020.02.185 ↗
24. Exploring MnCr2O4–Gd0.1Ce0.9O2-δ as a composite electrode material for solid oxide fuel cell10.1016/j.ijhydene.2019.09.196 ↗
25. Electrode properties of a spinel family, AFe2O4 (A = Co, Ni, Cu), as new cathode for solid oxide fuel cells10.1007/s10854-019-00851-x ↗
26. CuCo2O4-Er0.4Bi1.6O3-δ: an active hybrid cathode for intermediate temperature solid oxide fuel cells10.1016/j.ceramint.2018.12.074 ↗
27. Enhanced ORR catalytic activity of rare earth-doped Gd oxide ions in a CoFe2O4 cathode for low-temperature solid oxide fuel cells (LT-SOFCs)10.1016/j.ceramint.2022.06.119 ↗
28. Effectively promoting activity and stability of a MnCo2O4-based cathode by in Situ constructed heterointerfaces for solid oxide fuel cells10.1021/acsami.1c06757 ↗
29. Deposition of La0.8Sr0.2Cr0.97V0.03O3 and MnCr2O4 thin films on ferritic Alloy for solid oxide fuel cell application10.1016/j.surfcoat.2007.07.046 ↗
30. A promising NiCo2O4 protective coating for metallic interconnects of solid oxide fuel cells10.1016/j.jpowsour.2010.05.031 ↗
31. Cu1.3Mn1.7O4 spinel coatings deposited by electrophoretic deposition on crofer 22 APU substrates for solid oxide fuel cell applications10.1016/j.surfcoat.2016.09.028 ↗
32. Exploring Ni(Mn1/3Cr2/3)2O4 spinel-based electrodes for solid oxide cells10.1039/C9TA11878K ↗
33. Spinels: controlled preparation, oxygen reduction/evolution reaction application, and beyond10.1021/acs.chemrev.7b00051 ↗
34. High performance cobalt-free Cu1.4Mn1.6O4 spinel oxide as an intermediate temperature solid oxide fuel cell cathode10.1016/j.jpowsour.2016.03.046 ↗
35. Electrochemical performances of spinel oxides as cathodes for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2012.10.095 ↗
36. High performance Mn1.3Co1.3Cu0.4O4 spinel based composite cathodes for intermediate temperature solid oxide fuel cells10.1039/C9TA07069A ↗
37. Nanostructured spinel Mn1.3Co1.3Cu0.4O4 as a bifunctional electrocatalyst for high-performance solid oxide electrochemical cells at intermediate temperatures10.1016/j.jpowsour.2022.231611 ↗
38. Electrical and microstructural characterization of spinel phases as potential coatings for SOFC metallic interconnects10.1016/j.jpowsour.2005.03.137 ↗
39. Preparation and performance of Mg-doped spinel-structured LiMn2O4 cathode materials
40. Alkaline-earth metal doping in spinel LiMn2O4 cathode materials for Li-ion batteries: insights from first-principles calculations10.1016/j.chemphys.2022.111775 ↗
41. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
42. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
43. Efficient iterative schemes forab initiototal-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
44. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
45. Special points for brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
46. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
47. Commentary: the materials project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
48. Effect of Cu doping on Ba0.5Sr0.5Fe1−xCuxO3−δ perovskites for solid oxide fuel cells: a first-principles study10.1016/j.jpowsour.2016.02.028 ↗
49. An investigation of reentrant spin-glass behavior, magnetocaloric effect and critical behavior of MnCr2O410.1016/j.jallcom.2021.160224 ↗
50. Preparation of mesoporous/microporous MnCo2O4 and nanocubic MnCr2O4 using a single step solution combustion synthesis for bifunction oxygen electrocatalysis10.1149/1945-7111/ab679d ↗
51. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
52. Chemical state quantification of iron and chromium oxides using XPS: the effect of the background subtraction method10.1016/j.susc.2005.01.019 ↗
53. Structural, electronic, vibrational and magnetic properties of Zn2+ substituted MnCr2O4 nanoparticles10.1016/j.jmmm.2020.166595 ↗
54. Defect engineering for electrocatalytic nitrogen reduction reaction at ambient conditions
55. First principles study on the oxygen reduction reaction of the La1-xSrxMnO3-δ coated Ba1-xSrxCo1-yFeyO3-δ cathode for solid oxide fuel cells10.1016/j.ijhydene.2019.04.271 ↗
56. B-Site La, Ce, and Pr-doped Ba0.5Sr0.5Co0.7Fe0.3O3-δ perovskite cathodes for intermediate-temperature solid oxide fuel cells: effectively promoted oxygen reduction activity and operating stability10.1016/j.jpowsour.2021.229778 ↗
57. Geometric structure distribution and oxidation state demand of cations in spinel NixFe1-xCo2O4 composite cathodes for solid oxide fuel cells10.1016/j.cej.2021.131822 ↗
58. Electrical conductivity and thermal expansion of spinels at elevated temperatures10.1111/j.1551-2916.2007.01522.x ↗
59. Nanostructured spinel high-entropy oxide (Fe0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 as a potential cathode for solid oxide fuel cells10.1016/j.ceramint.2023.04.131 ↗