journal article·2023-09Open access

Thermal transport in lithium-ion batteries: The effect of degradation

Lena Spitthoff, Markus Solberg Wahl, Preben J.S. Vie, Odne Stokke Burheim

Abstract

In this work, we report thermal conductivities of pristine and degraded electrodes, from commercial lithium-ion batteries. The thermal conductivities were measured with and without electrolyte solvent and at different compaction pressures. The effect of degradation on thermal transport, both internal and external, is assessed. In addition, the overall cell cooling efficiency is reported as a function of the state-of-health, and full cell thermal conductivities are estimated. A reduction of the electrode thermal conductivity of up to 65% is found for degraded material. The reduction appears to be the most extreme for dry graphite anodes. Both mechanical clamping of the cells during cycling, and cold temperatures, appear to mitigate the reduction in thermal conductivity. The cell cooling efficiency is found to decrease by 50% at a state-of-health of 70–75%. Decreased wetting, due to a reduction in the amount of electrolyte and gassing, is believed to be responsible for the discrepancy between cell cooling efficiency and thermal conductivity of the electrodes. The main cause of a reduction in full cell thermal conductivity was found to be due to a reduction in anode thermal conductivity and reduction of electrolyte solvent.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Can Li-ion batteries be the panacea for automotive applications?10.1016/j.rser.2016.10.019 ↗
2. The lithium-ion battery: State of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
3. The environmental impact of Li-ion batteries and the role of key parameters – A review10.1016/j.rser.2016.08.039 ↗
4. Identifying key assumptions and differences in life cycle assessment studies of lithium-ion traction batteries with focus on greenhouse gas emissions10.1016/j.trd.2017.06.028 ↗
5. Lithium batteries: Status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
6. Surface cooling causes accelerated degradation compared to tab cooling for lithium-ion pouch cells10.1149/2.0361609jes ↗
7. Lithium ion battery degradation: What you need to know10.1039/D1CP00359C ↗
8. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
9. The role of cell geometry when selecting tab or surface cooling to minimise cell degradation10.1016/j.etran.2020.100073 ↗
10. Cost and carbon footprint reduction of electric vehicle lithium-ion batteries through efficient thermal management
11. Temperature dependent ageing mechanisms in lithium-ion batteries e a post-mortem study10.1016/j.jpowsour.2014.03.112 ↗
12. A review on various temperature-indication methods for Li-ion batteries10.1016/j.apenergy.2019.02.078 ↗
13. Temperature, ageing and thermal management of lithium-ion batteries10.3390/en14051248 ↗
14. Comparison of different cooling methods for lithium ion battery cells10.1016/j.applthermaleng.2015.10.015 ↗
15. How to cool lithium ion batteries: Optimising cell design using a thermally coupled model10.1149/2.0501913jes ↗
16. The surface cell cooling coefficient: A standard to define heat rejection from lithium ion battery pouch cells10.1149/1945-7111/ab6985 ↗
17. Effects of nonuniform temperature distribution on degradation of lithium-ion batteries
18. Directionality of thermal gradients in lithium-ion batteries dictates diverging degradation modes10.1016/j.xcrp.2021.100351 ↗
19. The cell cooling coefficient: A standard to define heat rejection from lithium-ion batteries10.1149/2.0191912jes ↗
20. Effects of geometric, structural and operational parameters on the thermal conductivity of lithium-ion cells10.1016/j.jpowsour.2022.232120 ↗
21. Meta-analysis of experimental results for heat capacity and thermal conductivity in lithium-ion batteries: A critical review10.1016/j.jpowsour.2021.230829 ↗
22. A comprehensive study on thermal conductivity of the lithium–ion battery10.1002/er.5016 ↗
23. Determination of the through-plane thermal conductivity and specific heat capacity of a Li-ion cylindrical cell
24. Thermal conductivity inside prismatic lithium-ion cells with dependencies on temperature and external compression pressure10.1016/j.est.2020.101680 ↗
25. Measurements of ageing and thermal conductivity in a secondary NMC-hard carbon Li-ion battery and the impact on internal temperature profiles10.1016/j.electacta.2017.07.173 ↗
26. Effect of microstructure on thermal conduction within lithium-ion battery electrodes using discrete element method simulations10.1002/ente.201600144 ↗
27. Modeling the thermal conductivity of porous electrodes of Li–Ion batteries as a function of microstructure parameters
28. Bruggeman’s exponents for effective thermal conductivity of lithium-ion battery electrodes10.1149/2.0151602jes ↗
29. Theoretical consideration of the effect of porosity on thermal conductivity of porous materials10.1007/s10934-006-8043-0 ↗
30. Thermal conductivity of Li-ion batteries and their electrode configurations – A novel combination of modelling and experimental approach10.1016/j.jpowsour.2017.07.105 ↗
31. Thermal conductivity and internal temperature profiles of Li-ion secondary batteries10.1016/j.jpowsour.2017.05.045 ↗
32. Capacity fade mechanisms and side reactions in lithium-ion batteries10.1149/1.1838857 ↗
33. Calendar aging of commercial Li-ion cells of different chemistries – A review10.1016/j.coelec.2018.05.023 ↗
34. Capacity plunge of lithium-ion batteries induced by electrolyte drying-out: Experimental and modeling study10.1016/j.est.2021.103013 ↗
35. Rapid operando gas monitor for commercial lithium ion batteries: Gas evolution and relation with electrode materials10.1016/j.jechem.2022.04.010 ↗
36. A review of gas evolution in lithium ion batteries10.1016/j.egyr.2020.02.022 ↗
37. In-situ X-ray tomographic imaging study of gas and structural evolution in a commercial Li-ion pouch cell10.1016/j.jpowsour.2021.230818 ↗
38. Measuring irreversible heat generation in lithium-ion batteries: An experimental methodology10.1149/1945-7111/ac5ada ↗
39. L. Spitthoff, M.S. Wahl, J.J. Lamb, P. Shearing, P. Vie, O.S. Burheim, On the Relations between Lithium-Ion Battery Reaction Entropy, Surface Temperatures and Degradation, 2023, unpublished.10.3390/batteries9050249 ↗
40. Online internal temperature sensors in lithium-ion batteries: State-of-the-art and future trends10.3389/fceng.2022.804704 ↗
41. Thermal characterization of Li-ion cell electrodes by photothermal deflection spectroscopy10.1016/j.jpowsour.2016.05.082 ↗
42. Krischer · 2013
43. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
44. Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application10.1016/j.jpowsour.2009.10.090 ↗
45. Thermal characterization of large size lithium-ion pouch cell based on 1d electro-thermal model10.1016/j.jpowsour.2014.08.092 ↗
46. Thermal conductivity in aged Li-ion cells under various compression conditions and state-of-charge10.3390/batteries7030042 ↗
47. Formation challenges of lithium-ion battery manufacturing10.1016/j.joule.2019.11.002 ↗
48. Measurements of ageing and thermal conductivity in a secondary NMC-hard carbon Li-ion battery and the impact on internal temperature profiles10.1016/j.electacta.2017.07.173 ↗
49. Identification and characterization of the dominant thermal resistance in lithium-ion batteries using operando 3-omega sensors10.1063/1.5134459 ↗
50. The impact of environmental factors on the thermal characteristic of a lithium–ion battery10.3390/batteries6010003 ↗
51. Thermal conductivity and internal temperature profiles of Li-ion secondary batteries10.1016/j.jpowsour.2017.05.045 ↗
52. Thermal conductivity, heat sources and temperature profiles of Li-ion batteries10.1149/05848.0145ecst ↗
53. Ultra-thin minichannel LCP for EV battery thermal management10.1016/j.apenergy.2013.07.013 ↗
54. Investigation of power battery thermal management by using mini-channel cold plate10.1016/j.enconman.2014.10.015 ↗
55. MacDonald · 2021
56. Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell10.1016/j.jpowsour.2009.06.077 ↗
57. Thermal conductivity of the elements: A comprehensive review
58. Prediction of kapitza resistance at fluid-solid interfaces10.1063/1.5126887 ↗
59. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles10.1038/s41560-019-0390-6 ↗
60. Quantification and modeling of mechanical degradation in lithium-ion batteries based on nanoscale imaging10.1038/s41467-018-04477-1 ↗
61. Inhomogeneities and cell-to-cell variations in lithium-ion batteries, a review10.3390/en14113276 ↗