Effects of an easy-to-implement water management strategy on performance and degradation of polymer electrolyte fuel cells
Source abstract
Abstract
Intermittent switching between wet and dry reactant gases during operation in a polymer electrolyte fuel cell (PEFC) can improve performance stability, alleviating the effects of flooding by controlling the water content within the system. However, lifetime durability may be affected due to membrane electrode assembly (MEA) boundary delamination and membrane damage. Two relative humidity (RH) control strategies were investigated, using electrochemical performance and MEA degradation as critical indicators. It was found that intermittent switching between wet and dry gases does not accelerate fuel cell degradation if the duration of the dry gas period is set reasonably (dry gases stops before the voltage reaches the apex of the hump). Additionally, current and temperature distribution mapping was utilised to capture the dynamic response between these transitional stages. The switching of dry gases first makes the current density distribution homogeneous, and the maximum current density is reduced subsequently. Then, the current density near the inlet keeps decreasing. Intermittent switching between wet and dry reactant gases is easy to implement and overcomes limitations in mass transfer at medium and high current densities.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Water management studies in PEM fuel cells, Part I: fuel cell design and in situ water distributions10.1016/j.ijhydene.2008.12.100 ↗
2. Review on water management methods for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.06.211 ↗
3. Effects of anode flooding on the performance degradation of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2014.04.092 ↗
4. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
5. Effects of flow field design on water management and reactant distribution in PEMFC: a review10.1007/s11581-016-1644-y ↗
6. Effect of serpentine flow-field design on the water management of polymer electrolyte fuel cells: an in-operando neutron radiography study10.1016/j.jpowsour.2018.07.085 ↗
7. A lung-inspired printed circuit board polymer electrolyte fuel cell10.1016/j.enconman.2019.112198 ↗
8. A lung-inspired approach to scalable and robust fuel cell design10.1039/C7EE02161E ↗
9. Impact of GDL structure and wettability on water management in polymer electrolyte fuel cells10.1039/b703485g ↗
10. Effect of hydrophobicity and pore geometry in cathode GDL on PEM fuel cell performance10.1016/j.electacta.2009.01.009 ↗
11. Optimizing the hydrophobicity of GDL to improve the fuel cell performance10.1039/D0RA09658J ↗
12. Impact of PTFE distribution across the GDL on the water droplet removal from a PEM fuel cell electrode containing binder10.1016/j.ijhydene.2018.06.111 ↗
13. Effect of cell compression on the water dynamics of a polymer electrolyte fuel cell using in-plane and through-plane in-operando neutron radiography10.1016/j.jpowsour.2019.227074 ↗
14. Humidification strategy for polymer electrolyte membrane fuel cells–A review10.1016/j.apenergy.2018.08.125 ↗
15. Experimental comparison between external and internal humidification in proton exchange membrane fuel cells for road vehicles10.1016/j.ijhydene.2015.03.012 ↗
16. Rapid humidity regulation by mixing of dry and humid gases with feedback control for PEM fuel cells10.1016/j.ijhydene.2018.04.187 ↗
17. Fuel cell humidity modeling and control using cathode internal water content10.1016/j.ijhydene.2020.04.283 ↗
18. Active disturbance rejection control strategy applied to cathode humidity control in PEMFC system10.1016/j.enconman.2020.113389 ↗
19. AI-based proton exchange membrane fuel cell inlet relative humidity control10.1109/ACCESS.2021.3130604 ↗
20. Temperature dependent performance and in situ AC impedance of high-temperature PEM fuel cells using the Nafion-112 membrane10.1149/1.2337008 ↗
21. Water management of proton exchange membrane fuel cell based on control of hydrogen pressure drop10.1016/j.jpowsour.2014.05.094 ↗
22. Nitrogen front evolution in purged polymer electrolyte membrane fuel cell with dead-ended anode10.1149/1.3425743 ↗
23. Dynamic water management of polymer electrolyte membrane fuel cells using intermittent RH control10.1016/j.jpowsour.2009.12.112 ↗
24. Membrane electrode assembly degradation by dry/wet gas on a PEM fuel cell10.1016/j.ijhydene.2010.04.077 ↗
25. New developments in proton conducting membranes for fuel cells10.1016/j.coche.2014.01.012 ↗
26. X-ray micro-computed tomography of polymer electrolyte fuel cells: what is the representative elementary area?10.1149/1945-7111/ab6983 ↗
27. Magnetic resonance imaging (MRI) of PEM dehydration and gas manifold flooding during continuous fuel cell operation10.1016/j.jpowsour.2006.04.125 ↗
28. Partial flooding and its effect on the performance of a proton exchange membrane fuel cell10.1016/j.enconman.2020.112537 ↗
29. Model based PEM fuel cell state-of-health monitoring via ac impedance measurements10.1016/j.jpowsour.2005.11.035 ↗
30. Effect of extended short-circuiting in proton exchange membrane fuel cells10.1039/D0SE00943A ↗
31. A review of the main parameters influencing long-term performance and durability of PEM fuel cells10.1016/j.jpowsour.2008.01.070 ↗
32. A new discovery of the active impact of Pt/C particles aggregation on electrode performance in PEMFC10.1016/j.ijhydene.2016.10.101 ↗
33. Quantitative characterization of catalyst layer degradation in PEM fuel cells by X-ray photoelectron spectroscopy10.1016/j.electacta.2009.02.028 ↗
34. XPS investigations of the proton exchange membrane fuel cell active layers aging: characterization of the mitigating role of an anodic CO contamination on cathode degradation10.1016/j.jpowsour.2010.11.027 ↗
35. Tuning the ionomer distribution in the fuel cell catalyst layer with scaling the ionomer aggregate size in dispersion10.1021/acsami.8b01751 ↗
36. The key to high performance low Pt loaded electrodes10.1149/2.1621704jes ↗
37. Effect of Pt and ionomer distribution on polymer electrolyte fuel cell performance and durability10.1021/acsaem.0c02841 ↗
38. Effects of both oxygen permeability and ion exchange capacity for cathode ionomers on the performance and durability of polymer electrolyte fuel cells10.1149/2.0071806jes ↗
39. Enhanced catalytic hydrogenation activity and selectivity of Pt-M x O y/Al2O3 (M= Ni, Fe, Co) heteroaggregate catalysts by in situ transformation of PtM alloy nanoparticles10.1021/jp309548v ↗
40. Efficient catalytic removal of formaldehyde at room temperature using AlOOH nanoflakes with deposited Pt10.1016/j.apcatb.2014.08.017 ↗
41. Comparison of the performance and degradation mechanism of PEMFC with Pt/C and Pt black catalyst10.1016/j.ijhydene.2021.11.135 ↗
42. Damage to the cathode catalyst of a PEM fuel cell caused by localized fuel starvation10.1149/1.2167930 ↗
43. Fault diagnosis of PEMFC based on the AC voltage response and 1D convolutional neural network10.1016/j.xcrp.2022.101052 ↗